Technical and Safety Standards Sample Clauses

Technical and Safety Standards. (A) Grantee shall comply with FCC Rules and Regulations, Part 76, Subpart K (Technical Standards), now in effect or as may be amended from time to time.
AutoNDA by SimpleDocs
Technical and Safety Standards a. The Operator shall at all times employ the standard of care attendant to the risks involved and shall install and maintain in use commonly accepted methods and devices for preventing failures and accidents which are likely to cause damage, injury or nuisance to the public or to employees of the Operator.
Technical and Safety Standards. (A) Grantee will maintain its system in accordance with applicable City codes and the following safety codes and construction standards: NEC - National Electrical Code; NESC - National Electrical Safety Code; OSHA - Occupational Safety and Health Administration; WISHA - Washington Industrial Safety and Health; and Rules and Regulations, Part 76, Subpart K (Technical Standards), now in effect or as they may be amended.
Technical and Safety Standards. Grantee will maintain its system using applicable City codes and the following safety codes and construction standards: NEC - NATIONAL ELECTRICAL CODE; NESC - NATIONAL ELECTRICAL SAFETY CODE; OSHA - OCCUPATIONAL SAFETY AND HEALTH ACT; WISHA - WASHINGTON INDUSTRIAL SAFETY AND HEALTH ACT.
Technical and Safety Standards 

Related to Technical and Safety Standards

  • Health and Safety Standards Contractor shall abide by all health and safety standards set forth by the State of California and/or the County of Xxxxxx pursuant to the Injury and Illness Prevention Program. If applicable, Contractor must receive all health and safety information and training from County.

  • Contractor Work Hours and Safety Standards Contractor shall ensure compliance with all safety and hourly requirements for employees, in accordance with federal, state, and County safety and health regulations and laws.

  • CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.

  • Safety Standards Performance of the Contract for all commodities or contractual services must comply with requirements of the Occupational Safety and Health Act and other applicable State of Florida and federal requirements.

  • Contract Work Hours and Safety Standards Act The following clauses apply to any Federal-aid construction contract in an amount in excess of $100,000 and subject to the overtime provisions of the Contract Work Hours and Safety Standards Act. These clauses shall be inserted in addition to the clauses required by 29 CFR 5.5(a) or 29 CFR 4.6. As used in this paragraph, the terms laborers and mechanics include watchmen and guards.

  • Quality Standards Each Party agrees that the nature and quality of its products and services supplied in connection with the other Party's Marks will conform to quality standards set by the other Party. Each Party agrees to supply the other Party, upon request, with a reasonable number of samples of any Materials publicly disseminated by such Party which utilize the other Party's Marks. Each Party will comply with all applicable laws, regulations, and customs and obtain any required government approvals pertaining to use of the other Party's marks.

  • Work Health and Safety (a) The employer and employee acknowledge their responsibilities under the Work Health and Safety Act 2011 and Work Health and Safety Regulations 2012.

  • Information Technology Accessibility Standards Any information technology related products or services purchased, used or maintained through this Grant must be compatible with the principles and goals contained in the Electronic and Information Technology Accessibility Standards adopted by the Architectural and Transportation Barriers Compliance Board under Section 508 of the federal Rehabilitation Act of 1973 (29 U.S.C. §794d), as amended. The federal Electronic and Information Technology Accessibility Standards can be found at: xxxx://xxx.xxxxxx-xxxxx.xxx/508.htm.

  • Technical Safeguards 1. USAC and the Department will process the data matched and any data created by the match under the immediate supervision and control of authorized personnel to protect the confidentiality of the data, so unauthorized persons cannot retrieve any data by computer, remote terminal, or other means.

  • Health and Safety Requirements The Contractor and his subcontractors ensure at all times compliance with safety regulations imposed by any Act of Parliament, ordinance or any regulation or by¬law of any local or statutory authority. Occupational Health and Safety Act (Act of 1993-Section 37) The Contractor shall comply with:  The Occupational Health and Safety Xxx, 0000, and all Regulations made there under;  All Eskom Safety and Operating Procedures listed in this Works Information. The Contractor acknowledges that it is fully aware of the requirements of all the above and undertakes to employ only people who have been duly authorised in terms thereof and who have received sufficient training to ensure that they can comply therewith. The Contractor undertakes not to do, or not to allow anything to be done which will contravene any of the provisions of the Act, Regulations or Safety and Operating Procedures. The Contractor shall appoint a person who will liaise with the Eskom Safety Officer responsible for the premises relevant to this contract. The person so appointed shall, on request:  Supply the Eskom Safety Officer with copies of minutes of all Health and Safety Committee meetings, whenever he is required to do so;  Supply the Eskom Safety Officer with copies of all appointments in respect of employees employed on this contract, in terms of the Act and Regulations and shall advise the Eskom Safety Officer of any changes thereto. Eskom may, at any stage during the currency of this agreement, be entitled to:  Do safety audits at the Contractor’s premises, its work-places and on its employees;  Refuse any employee, sub-contractor or agent of the Contractor access to its premises if such person has been found to commit any unlawful act or any unsafe working practice or is found to be not authorised or qualified in terms of the Act;

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!