Technology Access Fee and Technology Transfer Sample Clauses

Technology Access Fee and Technology Transfer. In the event that XENCOR wishes to use or have used (e.g. by a Business Partner) the Process outside this Agreement or the terms and conditions set forth in a contract manufacturing agreement with BII, except as provided below, XENCOR shall pay BII a technology access fee of [...***...] US dollars (the “Technology Access Fee”). In the event that XENCOR pays the Technology Access Fee set forth above, XENCOR shall have the right to use or have used (e.g. by a Business Partner) the Process worldwide for the manufacture of Product in accordance with the terms and conditions of this Agreement, without entering into a contract manufacturing agreement with BII. Notwithstanding the foregoing, no Technology Access Fee shall be due or payable if BII does not produce a viable Process for manufacture of Product as evidenced by failure to produce cGMP Product within the timeframe agreed in the Project Plan or, if factors outside of the reasonable control of BII (such as e.g. a cell-line not suitable for production, delay in the growth of the cell line; shortage of raw materials and supplies, delay or non-performance of BII’s suppliers, requests or orders of governments or regulatory authorities, etc.) require the timeframe in the Project Plan to be extended, the extended timeframe agreed upon in writing between BII and XENCOR that is reasonable and customary for paying customers in the biopharmaceutical industry for companies of comparable size and the respective activities. In addition, no Technology Access Fee shall be due or payable in connection with XENCOR’s election to use or have used (e.g. by a Business Partner) the Process if (i) BII does not exercise its first right to negotiate under either Section 5.2.2.a or 5.2.2.b, (ii) BII exercises its first right to negotiate but demands a supply price for clinical/commercial supply of Product that exceeds the bid price for the clinical/ commercial supply of Product of a comparable quantity and quality by a third party biopharmaceutical CMO of comparable size and respective activities to BII and with registered headquarters in the Major Territories, or (iii) XENCOR (or its Business Partner) has entered into a contract manufacturing agreement with BII, but BII is not able to supply XENCOR and its Business Partners [...***...] of the Product required. For the avoidance of doubt, nothing in this Section 5.2.3 (ii) shall affect such contract manufacturing agreement or BII’s position as Principal Supplier, but XENCOR may so...
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Technology Access Fee and Technology Transfer

  • Technology Access Fee In consideration of the licenses and rights granted to Regado herein, Regado shall, as of the date immediately preceding the closing (the “Closing”) of the first equity financing of Regado in which Regado is assigned a pre-money valuation of not less than [***] dollars ($[***]), issue to Archemix fully-paid and non-assessable shares of common stock of Regado equal to [***] percent ([***]%) of the total number of equity shares of Regado, on a fully diluted basis, immediately prior to the issuance of shares at the Closing. Regado shall deliver written notice of the Closing to Archemix at least [***] business days prior to such Closing in accordance with the notice provisions contained in Section 14.1 of this Agreement. Archemix and Regado shall enter into such agreements relating to the issuance of the common stock as are customary under such circumstances. For the purpose of this Agreement, “fully diluted basis” shall mean the aggregate of (a) the number of shares of common stock issued and outstanding on the determination date, (b) the number of shares of common stock issuable upon exercise, exchange or conversion of all exercisable, exchangeable or convertible securities outstanding on the determination date, assuming such securities were exercised, exchanged or converted on the determination date (without regard to whether such securities are actually exercisable, exchangeable or convertible on the determination date) and (c) the number of shares of common stock issuable pursuant to any other obligation or agreement of, or right granted by, Regado, whether vested or unvested, contingent or otherwise.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Technology Transfer Subject to the terms of the Development Supply Agreement, as soon as reasonably practicable, but in no event later than the fifth (5th) anniversary of the Effective Date, Alnylam shall initiate a technology transfer to MedCo, or to its Third Party manufacturer(s) of Licensed Product, selected by MedCo and reasonably acceptable to Alnylam, of Alnylam Know-How that is reasonably necessary or useful for the Manufacture of the Licensed Product, and shall make available its personnel on a reasonable basis to consult with MedCo or such Third Party manufacturer(s) with respect thereto, all at MedCo’s expense, including the Costs reasonably incurred by Alnylam in connection with such technology transfer activities. MedCo shall reimburse Alnylam such Costs incurred with respect to such Manufacturing technology transfer within [***] days after receipt of an invoice therefor. Alnylam and its Affiliates shall keep complete and accurate records in sufficient detail to enable the payments payable hereunder to be determined. Alnylam shall not be required to perform technology transfer to more than one Third Party manufacturer for each stage of the Licensed Product supply chain (i.e., Bulk Drug Substance, Bulk Drug Product and Finished Product). Promptly after MedCo’s written request, Alnylam shall use Commercially Reasonable Efforts to assign to MedCo any manufacturing agreement between Alnylam and a Third Party that is solely related to the manufacture of Licensed Products. Such assignment shall be subject to the terms and conditions of such agreement, including any required consents of such Third Party and MedCo’s written agreement to assume all the obligations of Alnylam under such agreement to be undertaken after such assignment, but Alnylam shall remain solely responsible for its obligations under such agreement arising prior to such assignment. Except as provided in the immediately preceding sentence, MedCo shall be solely responsible for contracting with such Third Party manufacturer (and any other Third Party manufacture to whom Alnylam has initiated technology transfer as set forth in this Section 5.3) for the supply of such Licensed Product and Alnylam shall have no obligations under such agreement between MedCo and such Third Party manufacturer. Alnylam shall use Commercially Reasonable Efforts to obtain any such consent in a form reasonably acceptable to MedCo.

  • Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner.

  • New Technology If New Technology becomes available from any source, including Supplier, then KP may evaluate and contract with any supplier so that KP will have access to New Technology at all times. If Supplier cannot offer New Technology at comparable or lower prices, KP may either (a) amend contract pricelist to add Supplier's New Technology at a mutually agreed-upon price; or (b) contract with other suppliers for New Technology. Regardless of whether New Technology is added to this Agreement, Supplier and KP will negotiate in good faith to equitably adjust the pricing for any current Product under this Agreement affected by the New Technology.

  • Software License Agreement McDATA agrees that all Licensed Software will be distributed to Customers subject to a Software License Agreement (including warranty statement), along with a McDATA Manual, in a manner which is (a) no less protective of BROCADE's Intellectual Property Rights in the Licensed Software than the form attached hereto as Exhibit D, and (b) legally enforceable in the jurisdictions in which the Licensed Software, as incorporated into the McDATA Products, is distributed.

  • Background Technology List here prior contracts to assign Inventions that are now in existence between any other person or entity and you. [ ] List here previous Inventions which you desire to have specifically excluded from the operation of this Agreement. Continue on reverse side if necessary.

  • Research License Following Selection of each CGI Antigen (or exercise of a Buy-In Right for each CGI Antigen) and subject to the terms and conditions of this Agreement, ABX agrees to grant, and hereby grants, to CGI a nonexclusive sublicense under the Licensed Technology to develop, make, have made, use, import or export or otherwise transfer physical possession of (but not to sell, lease, offer to sell or lease, or otherwise transfer title to) Covered Products related to such CGI Antigen and cells that express or secrete Antibodies to such CGI Antigen, in each case solely for purposes relating to or in connection with research or development (i) of Covered Products for use in the field of Gene Therapy or (ii) involving Genetic Material when used with viral or nonviral gene transfer systems. CGI shall have the right to sublicense the rights granted under this Section 2.5 upon the approval of ABX, which approval shall not be unreasonably withheld. In the event that ABX refuses to approve such a sublicense, ABX shall, to the extent that ABX has the right to do so, grant at CGI's request a nonexclusive sublicense of such rights directly to a non-Affiliate third party designated by CGI on terms and conditions substantially identical to the applicable terms and conditions of this Agreement. The sublicense granted by ABX under this Section 2.5 with respect to a CGI Antigen (and the further sublicenses, if any, granted by CGI under this Section 2.5 with respect to such CGI Antigen) shall terminate at such time as (A) CGI sends ABX an Abandonment Notice pursuant to Section 2.4.1 above regarding such CGI Antigen or (B) CGI enters into a CGI Product Sublicense related to such CGI Antigen; provided, however, that termination of a sublicense under this Section 2.5 with respect to a CGI Antigen pursuant to (B) above shall not affect the duration or survival of a grant of similar rights or sublicense under the CGI Product Sublicense with respect to such CGI Antigen, which rights or sublicense shall terminate or expire only in accordance with the terms of such CGI Product Sublicense. In the event that ABX enters into a Product Sublicense with respect to a CGI Antigen and CGI has not within six (6) months thereafter entered into a CGI Product Sublicense with respect to such CGI Antigen, the sublicense granted under this Section 2.5 with respect to such CGI Antigen shall terminate. It is understood and agreed that (x) as to ABX-Controlled Rights, the grant of rights under this Section 2.5 shall be subject to and limited in all respects by the terms of the applicable ABX In-License(s) pursuant to which such ABX-Controlled Rights were granted to ABX and (y) the rights and sublicenses granted to CGI under this Section 2.5 or any other provision of this Agreement shall be subject in all respects to the GenPharm Cross License.

  • Technology For purposes of this Agreement, “Technology” means all Software, information, designs, formulae, algorithms, procedures, methods, techniques, ideas, know-how, research and development, technical data, programs, subroutines, tools, materials, specifications, processes, inventions (whether or not patentable and whether or not reduced to practice), apparatus, creations, improvements and other similar materials, and all recordings, graphs, drawings, reports, analyses, and other writings, and other embodiments of any of the foregoing, in any form or media whether or not specifically listed herein. Further, for purposes of this Agreement, “Software” means any and all computer programs, whether in source code or object code; databases and compilations, whether machine readable or otherwise; descriptions, flow-charts and other work product used to design, plan, organize and develop any of the foregoing; and all documentation, including user manuals and other training documentation, related to any of the foregoing.

  • License; Use Upon delivery to an Authorized Person or a person reasonably believed by Custodian to be an Authorized Person of the Fund of software enabling the Fund to obtain access to the System (the “Software”), Custodian grants to the Fund a personal, nontransferable and nonexclusive license to use the Software solely for the purpose of transmitting Written Instructions, receiving reports, making inquiries or otherwise communicating with Custodian in connection with the Account(s). The Fund shall use the Software solely for its own internal and proper business purposes and not in the operation of a service bureau. Except as set forth herein, no license or right of any kind is granted to the Fund with respect to the Software. The Fund acknowledges that Custodian and its suppliers retain and have title and exclusive proprietary rights to the Software, including any trade secrets or other ideas, concepts, know-how, methodologies, or information incorporated therein and the exclusive rights to any copyrights, trademarks and patents (including registrations and applications for registration of either), or other statutory or legal protections available in respect thereof. The Fund further acknowledges that all or a part of the Software may be copyrighted or trademarked (or a registration or claim made therefor) by Custodian or its suppliers. The Fund shall not take any action with respect tot the Software inconsistent with the foregoing acknowledgement, nor shall the Fund attempt to decompile, reverse engineer or modify the Software. The Fund may not xxx, sell, lease or provide, directly or indirectly, any of the Software of any portion thereof to any other person or entity without Custodian’s prior written consent. The Fund may not remove any statutory copyright notice or other notice included in the Software or on any media containing the Software. The Fund shall reproduce any such notice on any reproduction of the Software and shall add any statutory copyright notice or other notice to the Software or media upon Custodian’s request.

Time is Money Join Law Insider Premium to draft better contracts faster.