Terms of participation by Facility in the Forward Capacity Market Sample Clauses

Terms of participation by Facility in the Forward Capacity Market. ‌ (a) The Supplier will file, if it has not already done so, any required materials by ISO-NE within two (2) Business Days of the Effective Date of this Agreement to have the Original FCM Contract Quantity from the Facility qualify for the Supplier’s first Forward Capacity Auction and each subsequent FCA. The costs of qualifying with ISO- NE are the responsibility of the Supplier. (b) The Facility must be listed as a Qualified Capacity resource to meet Connecticut’s Local Sourcing Requirement in the FCM during the Term of the Agreement. (c) The Facility’s Confirmed FCM Contract Quantity is required to participate in each Commitment Period over the entire Term of this Agreement. (d) If, after the Commercial Operation Date, the Facility’s Summer Seasonal Claimed Capability decreases to a level at which it is less than the Confirmed FCM Contract Quantity for non-Force Majeure related reasons: a. If the reduction in Confirmed FCM Contract Quantity is less than or equal to 3% of the Confirmed FCM Contract Quantity, the Confirmed FCM Contract Quantity is automatically reduced through an addendum to this Agreement for the purposes of settlement under Article 6 until the Facility’s Summer Seasonal Claimed Capability can be re-tested in accordance with ISO-NE procedures and the Confirmed FCM Contract Quantity is restored. b. If the reduction in Confirmed FCM Contract Quantity is more than 3% of the Confirmed FCM Contract Quantity, the Supplier shall have twenty-one (21) calendar days to cure before incurring liquidated damages. As of the twenty- second (22nd) day after the Facility’s Summer Seasonal Claimed Capability decreased below the Confirmed FCM Contract Quantity level, the Supplier shall pay to the Buyer liquidated damages equal to the positive difference (if any) between the Replacement Price for the foregone Confirmed FCM Contract Quantity (Confirmed FCM Contract Quantity minus Summer Seasonal Claimed Capability) and the amount that Buyer would have paid hereunder during the period from the calendar day when the Summer Seasonal Claimed Capability decreased to a level below the Confirmed FCM Contract Quantity until the calendar day that such deficiency is cured, which must be less than forty-five (45) calendar days in total, from the calendar day when the Summer Seasonal Claimed Capability decreased to level below the Confirmed FCM Contract Quantity. As of the forty-sixth (46th) calendar day after the Summer Seasonal Claimed Capability decreased, (1) the Su...
Sample 1
AutoNDA by SimpleDocs

Related to Terms of participation by Facility in the Forward Capacity Market

  • Reallocation of Participations to Reduce Fronting Exposure All or any part of such Defaulting Lender’s participation in L/C Obligations and Swingline Loans shall be reallocated among the Non-Defaulting Lenders in accordance with their respective Revolving Credit Commitment Percentages (calculated without regard to such Defaulting Lender’s Revolving Credit Commitment) but only to the extent that (x) the conditions set forth in Section 6.2 are satisfied at the time of such reallocation (and, unless the Borrower shall have otherwise notified the Administrative Agent at such time, the Borrower shall be deemed to have represented and warranted that such conditions are satisfied at such time), and (y) such reallocation does not cause the aggregate Revolving Credit Exposure of any Non-Defaulting Lender to exceed such Non-Defaulting Lender’s Revolving Credit Commitment. No reallocation hereunder shall constitute a waiver or release of any claim of any party hereunder against a Defaulting Lender arising from that Lender having become a Defaulting Lender, including any claim of a Non-Defaulting Lender as a result of such Non-Defaulting Lender’s increased exposure following such reallocation.

  • Reallocation of Applicable Percentages to Reduce Fronting Exposure During any period in which there is a Defaulting Lender, for purposes of computing the amount of the obligation of each non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit or Swing Line Loans pursuant to Sections 2.03 and 2.04, the “Applicable Percentage” of each non-Defaulting Lender shall be computed without giving effect to the Commitment of that Defaulting Lender; provided, that, (i) each such reallocation shall be given effect only if, at the date the applicable Lender becomes a Defaulting Lender, no Default or Event of Default exists; and (ii) the aggregate obligation of each non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit and Swing Line Loans shall not exceed the positive difference, if any, of (1) the Commitment of that non-Defaulting Lender minus (2) the aggregate Outstanding Amount of the Committed Loans of that Lender.

  • Termination or Reduction of Revolving Commitments The Borrower shall have the right, upon not less than three Business Days’ notice to the Administrative Agent, to terminate the Revolving Commitments or, from time to time, to reduce the amount of the Revolving Commitments; provided that no such termination or reduction of Revolving Commitments shall be permitted if, after giving effect thereto and to any prepayments of the Revolving Loans and Swingline Loans made on the effective date thereof, the Total Revolving Extensions of Credit would exceed the Total Revolving Commitments. Any such reduction shall be in an amount equal to $1,000,000, or a whole multiple thereof, and shall reduce permanently the Revolving Commitments then in effect.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

  • Provisions Related to Extended Revolving Credit Commitments If the maturity date shall have occurred in respect of any tranche of Revolving Credit Commitments at a time when another tranche or tranches of Revolving Credit Commitments is or are in effect with a longer maturity date, then on the earliest occurring maturity date all then outstanding Swing Line Loans shall be repaid in full on such date (and there shall be no adjustment to the participations in such Swing Line Loans as a result of the occurrence of such maturity date); provided, however, that if on the occurrence of such earliest maturity date (after giving effect to any repayments of Revolving Credit Loans and any reallocation of Letter of Credit participations as contemplated in Section 2.03(l)), there shall exist sufficient unutilized Extended Revolving Credit Commitments so that the respective outstanding Swing Line Loans could be incurred pursuant the Extended Revolving Credit Commitments which will remain in effect after the occurrence of such maturity date, then there shall be an automatic adjustment on such date of the participations in such Swing Line Loans and the same shall be deemed to have been incurred solely pursuant to the relevant Extended Revolving Credit Commitments, and such Swing Line Loans shall not be so required to be repaid in full on such earliest maturity date.

  • Termination or Reduction of Revolving Credit Commitments The Borrower shall have the right, upon not less than three Business Days’ notice to the Administrative Agent (which shall promptly notify each Lender thereof), to terminate the Revolving Credit Commitments or, from time to time, to reduce the amount of the Revolving Credit Commitments; provided that no such termination or reduction of Revolving Credit Commitments shall be permitted if, after giving effect thereto and to any prepayments of the Revolving Credit Loans made on the effective date thereof, the Total Revolving Extensions of Credit would exceed the Total Revolving Credit Commitments. Any such reduction shall be in an amount equal to $1,000,000, or a whole multiple thereof, and shall reduce permanently the Revolving Credit Commitments then in effect.

  • PROPOSED MOBILITY PROGRAMME The proposed mobility programme includes the indicative start and end months of the agreed study programme that the student will carry out abroad. The Learning Agreement must include all the educational components to be carried out by the student at the receiving institution (in table A) and it must contain as well the group of educational components that will be replaced in his/her degree by the sending institution (in table B) upon successful completion of the study programme abroad. Additional rows can be added as needed to tables A and B. Additional columns can also be added, for example, to specify the study cycle-level of the educational component. The presentation of this document may also be adapted by the institutions according to their specific needs. However, in every case, the two tables A and B must be kept separated, i.e. they cannot be merged. The objective is to make clear that there needs to be no one to one correspondence between the courses followed abroad and the ones replaced at the sending institutions. The aim is rather that a group of learning outcomes achieved abroad replaces a group of learning outcomes at the sending institution, without having a one to one correspondence between particular modules or courses. A normal academic year of full-time study is normally made up of educational components totalling 60 ECTS* credits. It is recommended that for mobility periods shorter than a full academic year, the educational components selected should equate to a roughly proportionate number of credits. In case the student follows additional educational components beyond those required for his/her degree programme, these additional credits must also be listed in the study programme outlined in table A. When mobility windows are embedded in the curriculum, it will be enough to fill in table B with a single line as described below: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Mobility window … Total: 30 Otherwise, the group of components will be included in Table B as follows: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Course x … 10 Module y … 10 Laboratory work … 10 Total: 30 The sending institution must fully recognise the number of ECTS* credits contained in table A if there are no changes to the study programme abroad and the student successfully completes it. Any exception to this rule should be clearly stated in an annex of the Learning Agreement and agreed by all parties. Example of justification for non-recognition: the student has already accumulated the number of credits required for his/her degree and does not need some of the credits gained abroad. Since the recognition will be granted to a group of components and it does not need to be based on a one to one correspondence between single educational components, the sending institution must foresee which provisions will apply if the student does not successfully complete some of the educational components from his study programme abroad. A web link towards these provisions should be provided in the Learning Agreement. The student will commit to reach a certain level of language competence in the main language of instruction by the start of the study period. The level of the student will be assessed after his/her selection with the Erasmus+ online assessment tool when available (the results will be sent to the sending institution) or else by any other mean to be decided by the sending institution. A recommended level has been agreed between the sending and receiving institutions in the inter-institutional agreement. In case the student would not already have this level when he/she signs the Learning Agreement, he/she commits to reach it with the support to be provided by the sending or receiving institution (either with courses that can be funded by the organisational support grant or with the Erasmus+ online tutored courses). All parties must sign the document; however, it is not compulsory to circulate papers with original signatures, scanned copies of signatures or digital signatures may be accepted, depending on the national legislation. * In countries where the "ECTS" system it is not in place, in particular for institutions located in partner countries not participating in the Bologna process, "ECTS" needs to be replaced in all tables by the name of the equivalent system that is used and a weblink to an explanation to the system should be added. The section to be completed during the mobility is needed only if changes have to be introduced into the original Learning Agreement. In that case, the section to be completed before the mobility should be kept unchanged and changes should be described in this section. Changes to the mobility study programme should be exceptional, as the three parties have already agreed on a group of educational components that will be taken abroad, in the light of the course catalogue that the receiving institution has committed to publish well in advance of the mobility periods and to update regularly as ECHE holder. However, introducing changes might be unavoidable due to, for example, timetable conflicts. Other reasons for a change can be the request for an extension of the duration of the mobility programme abroad. Such a request can be made by the student at the latest one month before the foreseen end date. These changes to the mobility study programme should be agreed by all parties within four to seven weeks (after the start of each semester). Any party can request changes within the first two to five-week period after regular classes/educational components have started for a given semester. The exact deadline has to be decided by the institutions. The shorter the planned mobility period, the shorter should be the window for changes. All these changes have to be agreed by the three parties within a two-week period following the request. In case of changes due to an extension of the duration of the mobility period, changes should be made as timely as possible as well. Changes to the study programme abroad should be listed in table C and, once they are agreed by all parties, the sending institution commits to fully recognise the number of ECTS credits as presented in table C. Any exception to this rule should be documented in an annex of the Learning Agreement and agreed by all parties. Only if the changes described in table C affect the group of educational components in the student's degree (table B) that will be replaced at the sending institution upon successful completion of the study programme abroad, a revised version should be inserted and labelled as "Table D: Revised group of educational components in the student's degree that will be replaced at sending institution". Additional rows and columns can be added as needed to tables C and D. All parties must confirm that the proposed amendments to the Learning Agreement are approved. For this specific section, original or scanned signatures are not mandatory and an approval by email may be enough. The procedure has to be decided by the sending institution, depending on the national legislation.

  • Reallocation to a Class with a Lower Salary Range Maximum 1. If the employee meets the skills and abilities requirements of the position and chooses to remain in the reallocated position, the employee retains the existing appointment status and has the right to be placed on the Employer’s internal layoff list for the classification occupied prior to the reallocation. 2. If the employee chooses to vacate the position or does not meet the skills and abilities requirements of the position, the layoff procedure specified in Article 31 of this Agreement applies.

  • Termination and Reduction of Revolving Commitments (a) Unless previously terminated, the Revolving Commitments shall terminate on the Maturity Date. (b) The Borrower may at any time terminate, or from time to time reduce, the Revolving Commitments; provided that (i) each partial reduction of the Revolving Commitments shall be in an amount that is an integral multiple of $1,000,000 and not less than $5,000,000 and (ii) the Borrower shall not terminate or reduce the Revolving Commitments if, after giving effect to any concurrent prepayment of the Loans in accordance with Section 2.08, the sum of the Aggregate Total Exposure would exceed the total Commitments. (c) The Borrower shall notify the Administrative Agent of any election to terminate or reduce the Revolving Commitments under paragraph (b) of this Section at least three Business Days prior to the effective date of such termination or reduction, specifying such election and the effective date thereof. Promptly following receipt of any notice, the Administrative Agent shall advise the Lenders of the contents thereof. Each notice delivered by the Borrower pursuant to this Section shall be irrevocable; provided that a notice of termination of the Revolving Commitments delivered by the Borrower may state that such notice is conditioned upon the effectiveness of other credit facilities or another transaction, in which case such notice may be revoked by the Borrower (by notice to the Administrative Agent on or prior to the specified effective date) if such condition is not satisfied. Any termination or reduction of the Revolving Commitments shall be permanent. Each reduction of the Revolving Commitments shall be applied to the Lenders in accordance with their respective Applicable Percentages. (d) If, after giving effect to any reduction of the Revolving Commitments, the Letter of Credit Sublimit exceeds the amount of the Revolving Commitments, such Letter of Credit Sublimit shall be automatically reduced by the amount of such excess.

  • Amount and Terms of Revolving Commitments (a) Subject to the terms and conditions set forth in this Agreement, during the Revolving Commitment Period, each Lender severally agrees to make, Convert and Continue revolving credit loans (“Revolving Loans”) in Dollars or any Alternative Currency in such amounts as Borrower may from time to time request; provided, however, that (i) the Dollar Amount of the Outstanding Revolving Obligations of each Lender shall not exceed such Lender’s Revolving Commitment at any time, (ii) the Dollar Amount of the Outstanding Revolving Obligations of all Lenders plus the aggregate principal amount of all outstanding Competitive Loans shall not exceed the combined Revolving Commitments at any time. The Revolving Facility is a revolving credit and, subject to the foregoing and the other terms and conditions hereof, Borrower may borrow, Convert, Continue, prepay and reborrow Revolving Loans as set forth herein without premium or penalty. (b) At any time after the Effective Date, Borrower and any one or more Lenders (including any New Lender) may agree that such Lender or Lenders shall make or increase the amount of their Revolving Commitments by executing and delivering to Administrative Agent an Increased Revolving Commitment Activation Notice specifying the amount of such increase or new Revolving Commitment and the applicable Increased Revolving Commitment Closing Date. Notwithstanding the foregoing, (i) at no time may the combined Revolving Commitments exceed $10,000,000,000, (ii) Revolving Commitments may not be made or increased after the occurrence of a Default or Event of Default that is continuing, including after giving effect to the incremental Revolving Commitments in question, and (iii) any increase effected pursuant to this Section 2.01(b) shall be in a minimum amount of at least $25,000,000. No Lender shall have any obligation to participate in any increase described in this Section 2.01(b) unless it agrees to do so in its sole discretion. (c) Any additional bank or financial institution (each, a “New Lender”) that, in the case of an institution that is not an Affiliate of a then-existing Lender, with the consent of Administrative Agent and each Issuing Lender (which consent, in each case, shall not be unreasonably withheld), elects to become a “Lender” under this Agreement in connection with an increase described in Section 2.01(b) shall execute a New Lender Supplement (each, a “New Lender Supplement”), substantially in the form of Exhibit E-1, whereupon such bank or financial institution shall become a Lender for all purposes and to the same extent as if originally a party hereto and shall be bound by and entitled to the benefits of this Agreement. (d) On each Increased Revolving Commitment Closing Date on which there are Revolving Loans outstanding, each Lender (including any New Lender) that has made or increased its Revolving Commitment shall make a Revolving Loan, the proceeds of which will be used to prepay the Revolving Loans of other Lenders, so that, after giving effect thereto, the resulting Revolving Loans outstanding are allocated among the Lenders on a pro rata basis based on the respective Revolving Percentages of the Lenders after giving effect to the increase of Revolving Commitments pursuant to Section 2.01(b) on such Increased Revolving Commitment Closing Date. (e) Borrower shall repay (i) all outstanding Revolving Loans made to it and all amounts funded by the Lenders as cash collateral pursuant to Section 2.03(d) on the Revolving Termination Date, the Extended Revolving Termination Date or the Second Extended Revolving Termination Date, as applicable, and (ii) the then unpaid principal amount of each Competitive Loan made to it on the last day of the Interest Period applicable to such Loan. Borrower may request that the Revolving Commitments and Letter of Credit Commitments be extended for additional one-year periods by providing written notice to Administrative Agent (“Notice Date”) not more than two times prior to the Revolving Termination Date or the Extended Revolving Termination Date, as applicable. If a Lender or a New Lender agrees, in its individual and sole discretion, to extend its Revolving Commitments and/or Letter of Credit Commitments (such Lender or New Lender, an “Extending Lender” or “New Extending Lender”, as the case may be), it will notify Administrative Agent in writing of its decision to do so and the maximum amount of Revolving Commitments and, if applicable, Letter of Credit Commitments it agrees to so extend no later than 30 days after the applicable Notice Date, which notice shall be irrevocable. Administrative Agent will notify Borrower, in writing, of the Lenders’ decisions no later than 35 days after the applicable Notice Date (“Extension Effectiveness Date”). As of the Extension Effectiveness Date, the Extending Lenders’ and the New Extending Lenders’ Revolving Commitments and Letter of Credit Commitments will be extended for an additional year from the Revolving Termination Date (the “Extended Revolving Termination Date”) or the Extended Revolving Termination Date (the “Second Extended Revolving Termination Date”), as applicable; provided that (i) more than 50% of the aggregate Revolving Commitments outstanding on the applicable Extension Effectiveness Date are extended or otherwise committed to by Extending Lenders and any New Extending Lenders (ii) no Default or Event of Default shall have occurred and be continuing on the applicable Extension Effectiveness Date after giving effect to the requested extension and (iii) the remaining tenor of Revolving Commitments of any Extending Lender and any New Extending Lender shall not exceed five years from the applicable Extension Effectiveness Date after giving effect to the requested extension. No Lender shall be required to consent to any such extension request, and any Lender that declines or does not respond in writing to Borrower’s request for commitment renewal (a “Declining Lender”) will have its Revolving Commitments and Letter of Credit Commitment terminated on the then-existing Revolving Termination Date or Extended Revolving Termination Date, as applicable (without regard to any renewals by other Lenders). Borrower will have the right to remove or replace any Declining Lenders in accordance with Section 10.21.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!