Timing; Location; and Minutes Sample Clauses

Timing; Location; and Minutes. The Joint Development Committee shall hold meetings as mutually agreed by the parties, but in no event less than monthly unless Takeda and Xxxxx mutually agree, no later than ten (10) days in advance of any meeting following the initial meeting of the Joint Development Committee, that no new business has transpired that would require a meeting of the Joint Development Committee. The first meeting of the Joint Development Committee shall be held within forty-five (45) days of the Original Effective Date and shall be held in Somerville, Massachusetts. After the initial meeting, meetings may be held by telephone or video conference, provided that the parties shall meet in person at least once per quarter, and such meetings shall alternate between Cambridge, Massachusetts and Somerville, Massachusetts. Minutes of all meetings setting forth decisions of the Joint Development Committee shall be prepared by the Alliance Managers and circulated to both parties within five (5) Business Days after each meeting, and shall not become official until approved by both parties in writing; minutes shall be presented for approval as the first order of business at the subsequent Joint Development Committee meeting, or if it is necessary to approve the minutes prior to such subsequent meeting, then the parties shall approve the minutes within five (5) Business Days of receipt thereof.
AutoNDA by SimpleDocs
Timing; Location; and Minutes. The Joint Steering Committee shall hold meetings as mutually agreed by the parties, but in no event less than semi-annually unless Takeda and Xxxxx mutually agree, no later than thirty (30) days in advance of any meeting following the initial meeting of the Joint Steering Committee, that no new business has transpired that would require a meeting of the Joint Steering Committee. The first meeting of the Joint Steering Committee shall be held within forty-five (45) days of the Original Effective Date and shall be held in Somerville, Massachusetts. After the initial meeting, meetings may be held by telephone or video conference, [***]. Minutes of all meetings setting forth decisions of the Joint Steering Committee shall be prepared by the Alliance Managers and circulated to both parties within thirty (30) days after each meeting, and shall not become official until approved by both parties in writing; minutes shall be presented for approval as the first order of business at the subsequent Joint Steering Committee meeting, or if it is necessary to approve the minutes prior to such subsequent meeting, then the parties shall approve the minutes within thirty (30) days of receipt thereof.
Timing; Location; and Minutes. The Joint Manufacturing Committee shall hold meetings as mutually agreed by the parties, but in no event less than half-yearly unless Takeda and Xxxxx mutually agree. The first meeting of the Joint Manufacturing Committee shall be held within ninety (90) days of the Original Effective Date and shall be held in Somerville, Massachusetts. After the initial meeting, meetings may be held by telephone or video conference, [***]. Minutes of all meetings setting forth decisions of the Joint Manufacturing Committee shall be prepared by the Alliance Managers and circulated to both parties within thirty (30) days after each meeting, and shall not become official until approved by both parties in writing; minutes shall be presented for approval as the first order of business at the subsequent Joint Manufacturing Committee meeting, or if it is necessary to approve the minutes prior to such subsequent meeting, then the parties shall approve the minutes within thirty (30) days of receipt thereof.

Related to Timing; Location; and Minutes

  • Closing Location The Closing shall be held at the location designated by the Corporation or, if no such designation is made, at the office of Seller's Attorney.

  • Access to Site 3.05.1 Contractor may enter and leave the premises at all reasonable times without charge. Contractor and its employees may use the common areas and roadways of the premises where it is to perform the services together with all facilities, equipment, improvements, and services provided in connection with the premises for common use. This excludes parking for Contractor’s personnel. Contractor shall repair any damage caused by it or its employees as a result of its use of the common areas.

  • Audit and Inspection of Plants, Places of Business and Records (a) The State and its agents, including, but not limited to, the Connecticut Auditors of Public Accounts, Attorney General and State’s Attorney and their respective agents, may, at reasonable hours, inspect and examine all of the parts of the Contractor’s and Contractor Parties’ plants and places of business which, in any way, are related to, or involved in, the performance of this Contract. (b) The Contractor shall maintain, and shall require each of the Contractor Parties to maintain, accurate and complete Records. The Contractor shall make all of its and the Contractor Parties’ Records available at all reasonable hours for audit and inspection by the State and its agents. (c) The State shall make all requests for any audit or inspection in writing and shall provide the Contractor with at least twenty-four (24) hours’ notice prior to the requested audit and inspection date. If the State suspects fraud or other abuse, or in the event of an emergency, the State is not obligated to provide any prior notice. (d) The Contractor will pay for all costs and expenses of any audit or inspection which reveals information that, in the sole determination of the State, is sufficient to constitute a breach by the Contractor under this Contract. The Contractor will remit full payment to the State for such audit or inspection no later than 30 days after receiving an invoice from the State. If the State does not receive payment within such time, the State may setoff the amount from any moneys which the State would otherwise be obligated to pay the Contractor in accordance with this Contract's Setoff provision. (e) The Contractor shall keep and preserve or cause to be kept and preserved all of its and Contractor Parties’ Records until three (3) years after the latter of (i) final payment under this Contract, or (ii) the expiration or earlier termination of this Contract, as the same may be modified for any reason. The State may request an audit or inspection at any time during this period. If any Claim or audit is started before the expiration of this period, the Contractor shall retain or cause to be retained all Records until all Claims or audit findings have been resolved. (f) The Contractor shall cooperate fully with the State and its agents in connection with an audit or inspection. Following any audit or inspection, the State may conduct and the Contractor shall cooperate with an exit conference. (g) The Contractor shall incorporate this entire Section verbatim into any contract or other agreement that it enters into with any Contractor Party.

  • Access to Collateral; Books and Records Allow Bank, or its agents, at reasonable times, on one (1) Business Day’s notice (provided no notice is required if an Event of Default has occurred and is continuing), to inspect the Collateral and audit and copy Borrower’s Books. Such inspections or audits shall be conducted no more often than once every twelve (12) months unless an Event of Default has occurred and is continuing in which case such inspections and audits shall occur as often as Bank shall determine is necessary. The foregoing inspections and audits shall be at Borrower’s expense, and the charge therefor shall be Eight Hundred Fifty Dollars ($850) per person per day (or such higher amount as shall represent Bank’s then-current standard charge for the same), plus reasonable out-of-pocket expenses. In the event Borrower and Bank schedule an audit more than ten (10) days in advance, and Borrower cancels or seeks to reschedule the audit with less than ten (10) days written notice to Bank, then (without limiting any of Bank’s rights or remedies), Borrower shall pay Bank a fee of One Thousand Dollars ($1,000) plus any out-of-pocket expenses incurred by Bank to compensate Bank for the anticipated costs and expenses of the cancellation or rescheduling.

  • Place of Business; Location of Collateral The address set forth in the heading to this Agreement is Borrower's chief executive office. In addition, Borrower has places of business and Collateral is located only at the locations set forth on the Schedule. Borrower will give Silicon at least 30 days prior written notice before opening any additional place of business, changing its chief executive office, or moving any of the Collateral to a location other than Borrower's Address or one of the locations set forth on the Schedule.

  • Access to Work Locations Reasonable access to employee work locations shall be granted officers of the Association and their officially designated representatives for the purpose of processing grievances or contacting members of the Association concerning business within the scope of representation. Such officers or representatives shall not enter any work location without the consent of the City Manager. Access shall be restricted so as not to interfere with the normal operations of the department or with established safety or security requirements. Solicitation of membership and activities concerned with the internal management of the Association, such as collecting dues, holding membership meetings, campaigning for office, conducting elections and distributing literature, shall not be conducted during working hours.

  • Access to NID 2.7.3.1 NewPhone may access the customer’s premises wiring by any of the following means and NewPhone shall not disturb the existing form of electrical protection and shall maintain the physical integrity of the NID: 2.7.3.1.1 BellSouth shall allow NewPhone to connect its Loops directly to BellSouth’s multi-line residential NID enclosures that have additional space and are not used by BellSouth or any other telecommunications carriers to provide service to the premises; 2.7.3.1.2 Where an adequate length of the customer’s premises wiring is present and environmental conditions permit, either Party may remove the customer premises wiring from the other Party’s NID and connect such wiring to that Party’s own NID; 2.7.3.1.3 Either Party may enter the subscriber access chamber or dual chamber NID enclosures for the purpose of extending a cross-connect or spliced jumper wire from the customer premises wiring through a suitable “punch-out” hole of such NID enclosures; or 2.7.3.1.4 NewPhone may request BellSouth to make other rearrangements to the customer premises wiring terminations or terminal enclosure on a time and materials cost basis. 2.7.3.2 In no case shall either Party remove or disconnect the other Party’s loop facilities from either Party’s NIDs, enclosures, or protectors unless the applicable Commission has expressly permitted the same and the disconnecting Party provides prior notice to the other Party. In such cases, it shall be the responsibility of the Party disconnecting loop facilities to leave undisturbed the existing form of electrical protection and to maintain the physical integrity of the NID. It will be NewPhone’s responsibility to ensure there is no safety hazard, and NewPhone will hold BellSouth harmless for any liability associated with the removal of the BellSouth Loop from the BellSouth NID. Furthermore, it shall be the responsibility of the disconnecting Party, once the other Party’s loop has been disconnected from the NID, to reconnect the disconnected loop to a nationally recognized testing laboratory listed station protector, which has been grounded as per Article 800 of the National Electrical Code. If no spare station protector exists in the NID, the disconnected loop must be appropriately cleared, capped and stored. 2.7.3.3 NewPhone shall not remove or disconnect ground wires from BellSouth’s NIDs, enclosures, or protectors. 2.7.3.4 NewPhone shall not remove or disconnect NID modules, protectors, or terminals from BellSouth’s NID enclosures. 2.7.3.5 Due to the wide variety of NID enclosures and outside plant environments, BellSouth will work with NewPhone to develop specific procedures to establish the most effective means of implementing this section if the procedures set forth herein do not apply to the NID in question.

  • Member Access to Vendor Proposal Notwithstanding any other information provided in this solicitation or Vendor designation of certain documentation as confidential or proprietary, Vendor’s acceptance of this TIPS Contract constitutes Vendor’s consent to the disclosure of Vendor’s comprehensive proposal, including any information deemed confidential or proprietary, to TIPS Members. The proposing Vendor agrees that TIPS shall not be responsible or liable for any use or distribution of information or documentation by TIPS Members or any other party. By submitting this proposal, Vendor certifies the foregoing.

  • Data Location 1.1. The CONTRACTOR shall not store or transfer non-public COUNTY data outside of the United States. This includes backup data and Disaster Recovery locations. The CONTRACTOR will permit its personnel and contractors to access COUNTY data remotely only as required to provide technical support. (Remote access to data from outside the continental United States is prohibited unless approved in advance and in writing by the County.) 1.2. The CONTRACTOR must notify the COUNTY in advance and in writing of any location changes to CONTRACTOR’s data center(s) that will process or store County data.

  • Member Access to Vendor Proposal Notwithstanding any other information provided in this solicitation or Vendor designation of certain documentation as confidential or proprietary, Vendor’s acceptance of this TIPS Contract constitutes Vendor’s consent to the disclosure of Vendor’s comprehensive proposal, including any information deemed confidential or proprietary, to TIPS Members. The proposing Vendor agrees that TIPS shall not be responsible or liable for any use or distribution of information or documentation by TIPS Members or any other party. By submitting this proposal, Vendor certifies the foregoing. If the vendor is awarded a contract with TIPS under this solicitation, the vendor agrees to make any Choice of Law clauses in any contract or agreement entered into between the awarded vendor and with a TIPS member entity to read as follows: "Choice of law shall be the laws of the state where the customer resides" or words to that effect. Agreed In the event of litigation or use of any dispute resolution model when resolving disputes with a TIPS member entity as a result of a transaction between the vendor and TIPS or the TIPS member entity, the Venue for any litigation or other agreed upon model shall be in the state and county where the customer resides unless otherwise agreed by the parties at the time the dispute resolution model is decided by the parties. Agreed Texas and other states restrict by law or state Constitution the ability of a governmental entity to indemnify others. TIPS requires that any contract entered into between a vendor and TIPS or a TIPS Member as a result of an award under this Solicitation limit the requirement that the Customer indemnify the Vendor by either eliminating any such indemnity requirement clauses in any agreements, contracts or other binding documents OR by prefacing all indemnity clauses required of TIPS or the TIPS Member entity with the following: "To the extent permitted by the laws or the Constitution of the state where the customer resides, ". Agreed

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!