Title Custody Measurement and Custody of Product
Title Custody Measurement and Custody of Product Sample Clauses
Related to Title Custody Measurement and Custody of Product
Delivery Point The delivery point is the point of delivery of the Power Product to the CAISO Controlled Grid (the “Delivery Point”). Seller shall provide and convey to Buyer the Power Product from the Generating Facility at the Delivery Point. Title to and risk of loss related to the Power Product transfer from Seller to Buyer at the Delivery Point.
Delivery Points Project water made available to the Agency pursuant to Article 6 shall be delivered to the Agency by the State at the delivery structures established in accordance with Article 10.
Delivery of Products 4.1 The Supplier shall ensure that: (a) Products are properly packed and secured in such manner as to enable them to reach their destination in good condition; (b) each delivery of Products is accompanied by a delivery note which shows the date of the Order, the Order number (if any), the type and quantity of Products (including the code number of the Products, where applicable), special storage instructions (if any) and, if the Products are being delivered in instalments, the outstanding balance of Products remaining to be delivered; and (c) it states clearly on the delivery note any requirement for Ornua to return any packaging material for the Products to the Supplier. Any such packaging material shall only be returned to the Supplier at the cost of the Supplier. 4.2 The Supplier shall deliver the Products: (a) to the location set out in the Order or such other location as the parties may agree which may include delivery to a carrier (Delivery Location); and (b) on the date specified in the Order or, if no such date is specified, on a date agreed with Ornua in advance (Delivery Date). Delivery shall be on a Business Day during normal business hours, unless agreed otherwise with Ornua or otherwise instructed by Ornua. 4.3 Delivery of Products shall be completed when the Supplier unloads and stacks the Products at the Delivery Location, unless different delivery terms (or Incoterms®) are specified in the Order. 4.4 Ornua operates a “Just-in-Time” delivery system. Time shall be of the essence in relation to the Delivery Date and any agreed delivery time. If the Products are not delivered on time by the Supplier, clause 6.1 shall apply. 4.5 If the Supplier delivers more that the quantity of Products ordered, Ornua shall not be bound to pay for the excess and any excess shall be and shall remain at the Supplier’s risk and shall be returnable at the Supplier’s expense. 4.6 The Supplier shall not deliver Products in instalments without Ornua's prior written consent. Where it is agreed that Products are to be delivered in instalments, they may be invoiced and paid for separately. Failure by the Supplier to deliver any one instalment on time or at all or any defect in an instalment shall entitle Ornua to the remedies set out in clause 6.1. 4.7 Title and risk in the Products shall pass to Ornua on completion of delivery.
Interconnection Customer (1) Interconnection Customer shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: None (2) In the event that, in accordance with the Interconnection Construction Service Agreement, Interconnection Customer has exercised the Option to Build, it is hereby permitted to build in accordance with and subject to the conditions and limitations set forth in that Section, the following portions of the Transmission Owner Interconnection Facilities which constitute or are part of the Customer Facility: None Ownership of the facilities built by Interconnection Customer pursuant to the Option to Build shall be as provided in the Interconnection Construction Service Agreement.
Updated Information Submission by Interconnection Customer The updated information submission by the Interconnection Customer, including manufacturer information, shall occur no later than one hundred eighty (180) Calendar Days prior to the Trial Operation. The Interconnection Customer shall submit a completed copy of the Electric Generating Unit data requirements contained in Appendix 1 to the LGIP. It shall also include any additional information provided to the Participating TO and the CAISO for the Interconnection Studies. Information in this submission shall be the most current Electric Generating Unit design or expected performance data. Information submitted for stability models shall be compatible with the Participating TO and CAISO standard models. If there is no compatible model, the Interconnection Customer will work with a consultant mutually agreed to by the Parties to develop and supply a standard model and associated information.
Interconnection Customer Authority Consistent with Good Utility Practice, this LGIA, and the CAISO Tariff, the Interconnection Customer may take actions or inactions with regard to the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities during an Emergency Condition in order to (i) preserve public health and safety, (ii) preserve the reliability of the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities,
Authorized Sub-processors Customer agrees that MailChimp may engage Sub-processors to process Customer Data on Customer's behalf. The Sub-processors currently engaged by MailChimp and authorized by Customer are listed in Annex A.
Delivery of Product 11.1 Subject to Clause 25 (Capacity Constraints), GSK (or the Nominated Supplier) shall Deliver the Products on the date specified in the relevant Firm Order, provided that: (A) the quantity of Product Delivered by GSK may vary by [***] from the quantity specified in the relevant Firm Order; and (B) the date of Delivery may vary by [***] from the date specified in the relevant Firm Order, and such variance shall not constitute a breach of this Agreement by GSK or entitle the Purchaser to reject such Delivery. Delivery of Commercial API and Commercial Products shall take place following release by GSK of such Products in accordance with (and the extent required by) the Quality Agreement, provided that, for clarity, the Purchaser shall only be required to pay for the quantity of Product that is actually Delivered. 11.2 In respect of Commercial API, the Parties may agree that some or all of the quantities of such Commercial API Delivered pursuant to Clause 11.1 shall remain in the possession of GSK or its Affiliate on [***]. The Purchaser shall pay GSK a storage fee to cover any GSK costs and expenses incurred in connection with holding and storing such [***] stock (“Storage Fee”). The Storage Fee is set forth in Schedule 4 (Fees). For the avoidance of doubt, no Storage Fee is payable in respect of quantities of Commercial API required for the Manufacture of the Commercial Product shown in the Firm Zone and that are held by GSK at designated Manufacturing Site in respect of Commercial Product for the purposes of such Manufacture. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE DERMAVANT SCIENCES LTD. HAS DETERMINED THE INFORMATION (I) IS NOT MATERIAL AND (II) WOULD LIKELY CAUSE COMPETITIVE HARM TO DERMAVANT SCIENCES LTD. IF PUBLICLY DISCLOSED. 11.3 Subject to paragraph 2 of Schedule 3 (Toll Manufacturing Provisions), the risk in and title to the Commercial Products shall remain with GSK (or its Affiliate) until Delivered, at which point it shall pass to the Purchaser. Title to Commercial API shall pass to the Purchaser when such Commercial API is purchased by Purchaser, but risk in such Commercial API shall remain with GSK in accordance with Clause 8.5 for so long as such Commercial API is in GSK’s possession as Purchaser Materials. 11.4 Other than in respect of Commercial API that the Parties agree shall be retained by GSK on Consignment, the Purchaser shall collect the Products Delivered from the Manufacturing Site on the date of Delivery, or such date as GSK, the Nominated Supplier or the Nominated Manufacturer may notify to the Purchaser (provided that, and if the Delivery date notified to the Purchaser is earlier or later than the Delivery window contemplated by Clause 11.1, the Delivery date must be agreed with the Purchaser). Notwithstanding the foregoing, and without limiting Clause 20.2, Purchaser may, [***], elect to obtain Delivery at any point within [***] of the notified date of Delivery by providing notice to GSK of such revised Delivery date. 11.5 Commercial API that the Parties agree shall be retained by GSK [***] at the Manufacturing Site in respect of Commercial API shall be collected by the Purchaser from such Manufacturing Site on such date as may be agreed between the Parties. 11.6 For the avoidance of doubt, irrespective of whether or not any quantity of Commercial API is retained by GSK [***] for a period of time after Delivery, the Purchaser shall be responsible for the delivery of Toll Materials to the designated Manufacturing Site in respect of Commercial Product.
Supply of Products 3.1 The Supplier warrants that the Products shall: (a) correspond with their description and any applicable Product Specification; (b) conform in all respects with the Order and any relevant sample; (c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement; (d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner; (e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery; (f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products; (g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and (h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice. 3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract. 3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract. 3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance. 3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.
Bidder Supplied Samples The Commissioner reserves the right to request from the Bidder/Contractor a representative sample(s) of the Product offered at any time prior to or after award of a contract. Unless otherwise instructed, samples shall be furnished within the time specified in the request. Untimely submission of a sample may constitute grounds for rejection of Bid or cancellation of the Contract. Samples must be submitted free of charge and be accompanied by the Bidder’s name and address, any descriptive literature relating to the Product and a statement indicating how and where the sample is to be returned. Where applicable, samples must be properly labeled with the appropriate Bid or Contract reference. A sample may be held by the Commissioner during the entire term of the Contract and for a reasonable period thereafter for comparison with deliveries. At the conclusion of the holding period the sample, where feasible, will be returned as instructed by the Bidder, at the Bidder’s expense and risk. Where the Bidder has failed to fully instruct the Commissioner as to the return of the sample (i.e., mode and place of return, etc.) or refuses to bear the cost of its return, the sample shall become the sole property of the receiving entity at the conclusion of the holding period.
