Topographic Survey The Professional shall obtain a topographic and utility survey as described below. 4.1.1. The Professional shall tie in all existing surface topographic features and structures within the survey limits shown in Figure 1. This survey shall include: tops of curbs, edges of pavement, pavement materials, driveways, sidewalks, retaining walls, drainage structures (top, edges and flow line), channels and drainage ways (tops, toes and flow line), manholes (rim, flow lines and diameters of pipes, type of material and photographs of the inside of manholes and drainage structures), including the same survey data for upstream and downstream manholes and structures that are outside of the survey limits for all gravity wastewater and drainage lines within the survey limits. Visible valves, meters, clean-outs, slabs, utility signs, utility poles and structures, fences, landscaping features, shrubbery, trees (including the approximate drip-line), tree canopies, buildings (edges within the survey limits) mailboxes, etc. Trees shall be tagged and tabulated by size and species specific in compliance with the City of New Braunfels Tree Preservation ordinance as defined in the City of New Braunfels Zoning Ordinance Chapter 5.3- 5i. The survey limits shall extend approximately 100 feet on intersecting streets. The Professional shall provide sufficient ground shots to create one (1) foot contours for the Project. 4.1.2. The Professional shall conduct a utility survey and locate existing utilities within the Project boundary in Figure 1. The Professional shall contact all utility service providers by calling Texas 811 and the NBU Project Manager to coordinate flagging of existing franchise utilities. The Professional shall request drawings of existing agency and municipal owned utilities and shall include locations of these utilities in the survey. The Professional shall tie in the locations of the discovered utilities on the survey. The Professional shall bear all costs for the Services associated with utility locates. 4.1.3. The Professional shall locate up to ten (10) geotechnical borings and tie them in to the Project survey. 4.1.4. The Professional shall set and install control points and/or benchmarks as required for the survey work (minimum 1-foot intervals). The Professional shall provide horizontal and vertical coordinates of the benchmarks in the required coordinate system and datum and show the benchmarks on the survey drawing. 4.1.5. The Professional shall research and review adjoining plats and deeds along the survey corridor. The Professional shall locate property corners and identify existing right of way (“ROW”), along the survey corridor, based on found monuments and record documents.
Ditches (1) Remove bank slough, minor slides, and obstructions. (2) Remove slash created by operations. (3) Restore to functional drainage. (4) Minimize erosion and/or sediment delivery by placement and maintenance of filtering systems.
Models The Purchaser acknowledges that the model homes, if any, are for display purposes only, and that some or all of the features contained therein may not be included in the Dwelling unless same is specifically provided for in any schedule forming part of this Agreement. The Purchaser acknowledges and accepts that the Vendor will be maintaining the model home or homes or sales offices and all advertising signs associated therewith for sale purposes until all homes in this subdivision and/or the adjacent subdivisions built by the Vendor or its affiliated corporations have been constructed, sold and occupied. The Purchaser acknowledges that the lot dimensions illustrated on the proposed plan of subdivision (if not registered) are approximate and may be varied in accordance with the requirements of the Vendor or the Municipality. The Purchaser further acknowledges that the lot dimensions illustrated on various plans, brochures or other marketing materials displayed in the sales office or elsewhere are approximate and it is suggested that the Purchaser refer to the actual dimensions of the subject lot as noted on the proposed plan of subdivision subject to the foregoing. The Purchaser acknowledges that if the Property being purchased herein has been used by the Vendor as a model home or inventory to the Vendor, then there will be wear and tear in the Property which the Purchaser accepts and the Purchaser acknowledges that he/she is purchasing this Property on an “as is” basis including without limiting the generality thereof existing nicks, dents, scratches, scuff marks on all hardwood areas, stairs, pickets, xxxxxxxx, risers, treads, all trim work doors, jambs, baseboards/casings, wear and tear on carpet, existing paint touch-up blemishes, existing chips and scratches on ceramics and grout areas, wear and tear and scuff marks on all counters and tubs and agrees that the Vendor shall not be responsible either directly or indirectly (including by way of claim pursuant to the legislation relating to the Tarion warranties) to clean, repair or replace any part of the Property including wall covering, carpeting, vinyl/ceramic/hardwood flooring, cabinetry, window treatments, trees, shrubs or other planting materials, interlocking walkways and/or slab walkways, or any other features or extras on the Property either before or after closing unless specifically set out in this Agreement of Purchase and Sale. The Purchaser acknowledges that the life time line of the exterior brick work, shingles, windows and doors seals commenced at the time the model home was built and the Builder’s warranties have expired and the Builder’s warranties on the air conditioner and humidifier ( Mechanical Units) have expired and agrees that the Vendor shall not be responsible either directly or indirectly (including by way of claim pursuant to the legislation relating to the Tarion warranties) for any warranty claim for same. All appliances, including but not limited to the air conditioner and humidifiers (Mechanical Units), and fixtures included in the purchase price are purchased in an “as is” condition.
Photographs You give your permission to us to use any photograph or photographic image including video or video stills taken of you while you are in any public spaces, grounds, offices at the Property or any sponsored events at the Property. You grant us and the Manager and our designees, the irrevocable and unrestricted right and permission to copyright, in its own name or otherwise, and to use, re-use, publish and re-publish photographic or video portraits or pictures of you or in which you may be included, without restriction as to changes or alterations. This usage may be in conjunction with your own name or a fictitious name. It may involve reproductions in color or otherwise that may be made through any medium, and in any and all media now or hereafter known. Usage may include illustration, promotion, art, editorial, advertising, trade, or any other legal purpose. You also consent to the use of any printed matter in conjunction with that usage. You waive any right that you may have to inspect or approve the finished product, the advertising copy or other matter that may be used in that regard. I hereby waive any right that I may have to inspect or approve the finished product and the advertising copy or other matter that may be used in connection therewith or the use to which it may be applied. You agree that we, the Manager and our designees will have no liability due to any blurring, distortion, alteration, optical illusion, or use in composite form that may occur in taking or usage of any picture or in the subsequent processing or publication of the picture. You release us, the Manager, and our designees from all claims of any nature arising in any way from the use of your photograph or photographic image. This release contains the entire agreement on this subject matter.
Database The LERG is available through Telcordia. ICONN is available through the Qwest web site.
Maps The maps service and features of the iOS Software (“Maps”), including map data coverage, may vary by region. When you use any location-based features within Maps, such as turn-by-turn navigation, traffic and local search, various location-related and usage information may be sent to Apple, including the real-time geographic location of your iOS Device, in order to process your request and help improve Maps. Such location and usage data is collected by Apple in a form that does not personally identify you. By using Maps, you agree and consent to Apple’s and its subsidiaries’ and agents’ transmission, collection, maintenance, processing, and use of this information, to provide and improve the Maps features and service, and other Apple products and services. You may disable the location-based functionality of Maps by going to the Location Services setting on your iOS Device and turning off the individual location setting for Maps. Certain Maps features will however be unavailable if you disable the Location Services setting, such as turn-by-turn navigation.
DRESS 6.1 Players shall be required to provide and wear their own playing shirts for the Event (“Event Shirts”); which must be worn throughout the Event and in any promotional work associated to the Event with dark smart trousers and plain black shoes/smart black sneakers. No waistcoats (vests), bow ties, denim jeans, t-shirts, jackets or sports shoes will be permitted. a) The Player will be entitled to wear a maximum of 4 (four) logos (for their own benefit and remuneration) on their Event Shirts ("Player Logos") throughout the Event. Player Logos must not exceed 7.5 cm x 5 cm (3” x 2”) or 6 square inches and shall not be permitted to be positioned on the left-chest of each Players Event Shirt or above or below the Event Logo. The Player shall submit to the Promoter no later than 1 (one) week before the first day of the Event details of the Player Logo’s for approval; b) Player logos shall include all logo’s, for the avoidance of doubt logos of federation’s and billiards clubs shall be included in the 4 logos permitted. Player country flags and names shall not be included as a logo; c) the Promoter shall have absolute discretion to disallow a Player the wearing of any Logo that, in the opinion of the Promoter, conflicts with the Event, Promoter, Sponsors, Broadcasters of the Event; d) the Promoter shall reserve the right, to be exercised in its sole discretion, to require the Player to display in addition to the above, a minimum of 1 (one) logo on the Event Shirts to be positioned as instructed by the Promoter for the sole use and exploitation by the Promoter (“Event Logo”); e) the purpose of this clause is not to act as an unfair restraint of trade or otherwise prevent the Player from earning a living.
Firmware 7.1 The Supplier must deliver the equipment, Goods or hardware equipped with all the firmware required to use all the Goods or hardware’s functions. Any software embedded in the equipment, Goods or hardware, including the firmware, is provided to the Local Government with a license to use this software, with all license costs and royalties being included in the Fee Schedule (Schedule C). All firmware will be the most recent version available at the time of shipping.
Devices BNY Mellon will restrict the transfer of Customer Data from its network to mass storage devices. BNY Mellon will use a mobile device management system or equivalent tool when mobile computing is used to provide the services. Applications on such authenticated devices will be housed within an encrypted container and BNY Mellon will maintain the ability to remote wipe the contents of the container.
Techniques Framework agreement: Information about the dynamic purchasing system: No dynamic purchase system
