Order Process When the start of production of your reservation nears, we will ask you to confirm your option selections and to provide full details of the legal purchaser of the Model X. Tesla will create an order for your Model X containing the information provided by you, and a Purchase Agreement indicating the estimated purchase price of your Model X, taking into account the base price of the model and any options included or that you select, plus estimates of any applicable taxes, duties, transport and delivery charges, and any other applicable fees. Tesla will then submit to you the order and the Purchase Agreement for your review. If you wish to proceed and purchase the Model X, you must sign and return the Purchase Agreement together with any amounts that are then required to be paid. Production of your Model X will then be commenced and your deposit payable under the Purchase Agreement will be held by Tesla as a non-refundable deposit (to the extent permitted by applicable law). At the time you enter into the Purchase Agreement, you may, at your sole option, notify us that you would like to take your Reservation Payment and apply it to your deposit. These procedures may be subject to change.
Order Processing Any order by you for the purchase of shares of the respective Funds through us shall be accepted at the time when it is received by us (or any clearing house agency that we may designate from time to time), and at the offering and sale price next determined, unless rejected by us or the respective Funds. In addition to the right to reject any order, the Funds have reserved the right to withhold shares from sale temporarily or permanently. We will not accept any order from you that is placed on a conditional basis or subject to any delay or contingency prior to execution. The procedures relating to the handling of orders shall be subject to instructions that we shall forward from time to time to all members of the Selling Group. The shares purchased will be issued by the respective Funds only against receipt of the purchase price, in collected New York or Los Angeles Clearing House funds subject to deduction of all concessions on such sale (reallowance of any concessions to which you are entitled on purchases at net asset value will be paid through our direct purchase concession system). If payment for the shares purchased is not received within three days after the date of confirmation the sale may be cancelled forthwith, by us or by the respective Funds, without any responsibility or liability on our part or on the part of the Funds, and we and/or the respective Funds may hold you responsible for any loss, expense, liability or damage, including loss of profit suffered by us and/or the respective Funds, resulting from your delay or failure to make payment as aforesaid.
SALES AND ORDER PROCESSING CHARGE Contractor shall sell its products to END USERS based on the pricing and terms of this Agreement. H-GAC will invoice Contractor for the applicable order processing charge when H-GAC receives notification of an END USER order. Contractor shall remit to H-GAC the full amount of the applicable order processing charge, after delivery of any product or service and subsequent END USER acceptance. Payment of the Order Processing Charge shall be remitted from Contractor to H-GAC, within thirty (30) calendar days or ten (10) business days after receipt of an END USER’s payment, whichever comes first, notwithstanding Contractor’s receipt of invoice. For sales made by Contractor based on this Agreement, including sales to entities without Interlocal Agreements, Contractor shall pay the applicable order processing charges to H-GAC. Further, Contractor agrees to encourage entities who are not members of H-GAC’s Cooperative Purchasing Program to execute an H-GAC Interlocal Agreement. H-GAC reserves the right to take appropriate actions including, but not limited to, Agreement termination if Contractor fails to promptly remit the appropriate order processing charge to H-GAC. In no event shall H-GAC have any liability to Contractor for any goods or services an END USER procures from Contractor. At all times, Contractor shall remain liable to pay to H-GAC any order processing charges on any portion of the Agreement actually performed, and for which compensation was received by Contractor.
Complaints Process The School shall establish and adhere to a process for resolving public complaints which shall include an opportunity for complainants to be heard. The final administrative appeal shall be heard by the School's Governing Board, except where the complaint pertains to a possible violation of any law or term under this Contract. The complaints process shall be readily accessible from the School’s website, as described in Section 11.4.1.
Review Process A/E's Work Product will be reviewed by County under its applicable technical requirements and procedures, as follows:
Scope of Processing The subject-matter of Processing of Personal Data by Okta is the performance of the Service pursuant to the Agreement. The duration of the Processing, the nature and purpose of the Processing, the types of Personal Data and categories of Data Subjects Processed under this DPA are further specified in Appendix 1 to this DPA.
Bidding Process 3.1. Bidding shall generally commence based on the sequence of the lot being shown on the PAH Website. However the Auctioneer has the right to vary the sequence without having to give prior notice to the intended bidders.
3.2. It shall be the responsibilities of the E-bidders to login through PAH website to wait for the turn to bid for the property lot in which they intend to bid.
3.3. The Auctioneer has the discretion to set a new reserve price in the event that there is more than one (1) registered bidder.
3.4. The amount of incremental bid will appear on the website prior to the commencement of the auction.
3.5. Registered online Bidders shall start bidding online by pressing the BID Button using their own gadgets with internet connection. If your bid is the highest, it will be denoted by a Green Coloured Box otherwise it will be a Red Coloured Box The highest bid shall flash 10 seconds (subject to change) interval for four (4) times " Calling Once, Calling Twice, Last Call and Sold". E-bidders may submit their bid at any of these stages of biddings by pressing the BID button. The successful bidder's bid will be denoted by a green coloured screen. The highest bidder shall be declared as the successful purchaser upon the fall of the hammer.
3.6. In the event that there is no bid after forty(40) seconds from the time of commencement of the auction, the auction shall be aborted.
3.7. Any bid once entered by the registered online E-bidders shall be binding and the bid shall not be withdrawn or retracted in any manner whatsoever after the fall of the hammer.
3.8. Both the successful and unsuccessful bidders will be notified by the Auctioneer through the website and also via E-mail where further directions are given in order to conclude the sale of the auction property.
3.9. In the event of any dispute, the decision of the Auctioneer shall be final and binding on all bidders.
3.10. Unsuccessful E-bidders shall have the deposit refunded to the same bank account from which the deposit transfer was made within two (2) working days from the date of auction.
3.11. The information shown and/or prompted on the screen handled by the PAH website in regards to the auction in particular the increment of the bidding price during the bidding process and the declaration of the successful bidder shall be final and conclusive.
Process a. The grievance shall be referred to one of the following arbitrators:
i. Xxxx Xxxxx
ii. Xxxxx Xxxxxx iii. Xxxxx Xxxxxxxx
Ordering Process 6.4.1 CLEC, or CLEC's agent, shall act as the single point of contact for its End User Customers' service needs, including without limitation, sales, service design, order taking, Provisioning, change orders, training, maintenance, trouble reports, repair, post-sale servicing, Billing, collection and inquiry. CLEC's End User Customers contacting Qwest in error will be instructed to contact CLEC; and Qwest's End User Customers contacting CLEC in error will be instructed to contact Qwest. In responding to calls, neither Party shall make disparaging remarks about each other. To the extent the correct provider can be determined, misdirected calls received by either Party will be referred to the proper provider of local Exchange Service; however, nothing in this Agreement shall be deemed to prohibit Qwest or CLEC from discussing its products and services with CLEC's or Qwest's End User Customers who call the other Party seeking such information.
6.4.2 CLEC shall transmit to Qwest all information necessary for the ordering (Billing, Directory Listing and other information), installation, repair, maintenance and post-installation servicing according to Qwest's standard procedures, as described in the Qwest Product Catalog (PCAT) available on Qwest's public web site located at xxxx://xxx.xxxxx.xxx/wholesale/pcat. Information shall be provided using Qwest's designated Local Service Request (LSR) format which may include the LSR, End User Customer and resale forms.
6.4.3 Qwest will use the same performance standards and criteria for installation, Provisioning, maintenance, and repair of services provided to CLEC for resale under this Agreement as Qwest provides to itself, its Affiliates, its subsidiaries, other Resellers, and Qwest retail End User Customers. The installation, Provisioning, maintenance, and repair processes for CLEC's resale service requests are detailed in the Access to OSS Section of this Agreement, and are applicable whether CLEC's resale service requests are submitted via Operational Support System or by facsimile.
6.4.4 CLEC is responsible for providing to Qwest complete and accurate End User Customer Directory Listing information including initial and updated information for Directory Assistance Service, white pages directories, and E911/911 Emergency Services. The Ancillary Services Section of this Agreement contains complete terms and conditions for Directory Listings for Directory Assistance Services, white pages directories, and E911/911 Emergency Services.
6.4.5 If Qwest's retail End User Customer, or the End User Customer's New Service Provider orders the discontinuance of the End User Customer's existing Qwest service in anticipation of the End User Customer moving to a New Service Provider, Qwest will render its closing xxxx to the End User Customer, discontinuing Billing as of the date of the discontinuance of Qwest's service to the End User Customer. If the Current Service Provider, or if the End User Customer's New Service Provider orders the discontinuance of existing resold service from the Current Service Provider, Qwest will xxxx the Current Service Provider for service through the date the End User Customer receives resold service from the Current Service Provider. Qwest will notify CLEC by Operational Support System interface, facsimile, or by other agreed-upon processes when an End User Customer moves from the Current Service Provider to a New Service Provider. Qwest will not provide the Current Service Provider with the name of the New Service Provider selected by the End User Customer.
6.4.6 CLEC shall provide Qwest and Qwest shall provide CLEC with points of contact for order entry, problem resolution and repair of the resold services. These points of contact will be identified for both CLEC and Qwest in the event special attention is required on a service request.
6.4.7 Prior to placing orders on behalf of the End User Customer, CLEC shall be responsible for obtaining and having in its possession Proof of Authorization (POA), as set forth in the POA Section of this Agreement.
6.4.8 Due Date intervals for CLEC's resale service requests are established when service requests are received by Qwest through Operational Support Systems or by facsimile. Intervals provided to CLEC shall be equivalent to intervals provided by Qwest to itself, its Affiliates, its subsidiaries, other Resellers, and to Qwest's retail End User Customers.
Approval Process Tenant shall notify Landlord whether it approves of the submitted working drawings within three business days after Landlord’s submission thereof. If Tenant disapproves of such working drawings, then Tenant shall notify Landlord thereof specifying in reasonable detail the reasons for such disapproval, in which case Landlord shall, within five business days after such notice, revise such working drawings in accordance with Tenant’s objections and submit the revised working drawings to Tenant for its review and approval. Tenant shall notify Landlord in writing whether it approves of the resubmitted working drawings within one business day after its receipt thereof. This process shall be repeated until the working drawings have been finally approved by Landlord and Tenant. If Tenant fails to notify Landlord that it disapproves of the initial working drawings within three business days (or, in the case of resubmitted working drawings, within one business day) after the submission thereof, then Tenant shall be deemed to have approved the working drawings in question. Any delay caused by Tenant’s unreasonable withholding of its consent or delay in giving its written approval as to such working drawings shall constitute a Tenant Delay Day (defined below). If the working drawings are not fully approved (or deemed approved) by both Landlord and Tenant by the 15th business day after the delivery of the initial draft thereof to Tenant, then each day after such time period that such working drawings are not fully approved (or deemed approved) by both Landlord and Tenant shall constitute a Tenant Delay Day.
