Unbundled Sub-Loop. Feeder (USLF) provides connectivity between BellSouth's central office and its cross-box (or other access point) that serves an end user location.
Unbundled Sub-Loop. Intrabuilding Network Cable (USL-INC) (a.k.a. riser cable) is the distribution facility inside a subscriber’s building or between buildings on one customer’s same premises (continuous property not separated by a public street or road). USL-INC includes the facility from the cross-connect device in the building equipment room up to and including the point of demarcation, at the end user’s premises.
2.7.4.1 In a scenario that requires connection in a building equipment room, BellSouth will install a cross connect panel for the purpose of accessing USL-INC pairs. The cross-connect panel will function as a single point of interconnection (SPOI) for USL-INC and will be accessible by multiple carriers as space permits. BellSouth will place cross-connect blocks in 25-pair increments for SouthEast’s use on this cross-connect panel. SouthEast will be responsible for connecting its facilities to the 25-pair cross-connect block(s).
Unbundled Sub-Loop. (distribution facilities)
Unbundled Sub-Loop. Intrabuilding Network Cable (USL-INC) (a.k.a. riser cable) is the distribution facility inside a subscribers’ building or between buildings on one customer’s same premises (continuous property not separated by a public street or road). USL-INC includes the facility from the cross-connect device in the building equipment room up to and including the point of demarcation, at the end user’s premises.
Unbundled Sub-Loop. Intrabuilding Network Cable (USL-INC) (a.k.a. riser cable) is the distribution facility inside a subscriber’s building or between buildings on one customer’s same premises (continuous property not separated by a public street or road). USL-INC includes the facility from the cross-connect device in the building equipment room up to and including the point of demarcation, at the end user’s premises.
2.7.4.1 In a scenario that requires connection in a building equipment room, BellSouth will install a cross connect panel for the purpose of accessing USL-INC pairs. The cross-connect panel will function as a single point of interconnection (SPOI) for USL-INC and will be accessible by multiple carriers as space permits. BellSouth will place cross-connect blocks in 25-pair increments for <<customer_name>>’s use on this cross-connect panel. <<customer_name>> will be responsible for connecting its facilities to the 25-pair cross-connect block(s).
Unbundled Sub-Loop. Feeder Loop, 2 Wire Loop-Start, Voice Grade - Zone 2 UEA USBFB 18.35 122.52 46.61 149.46 59.37 19.99 19.99 19.99
Unbundled Sub-Loop. Feeder Loop, Per 2 Wire Ground-Start, Voice Grade - Zone 3 UEA USBFA 21.04 122.52 46.61 149.46 59.37 19.99 19.99 19.99 19.99 Order Coordination for Specified Conversion Time, per LSR UEA OCOSL 45.34 Unbundlde Sub-Loop Feeder Loop, 2 Wire Loop-Start, Voice Grade - Zone 1 UEA USBFB 11.43 122.52 46.61 149.46 59.37 19.99 19.99 19.99
Unbundled Sub-Loop. Concentration System (USLC)
2.9.1 Where facilities permit and where necessary to comply with an effective Commission order, BellSouth will provide to Knology with the ability to concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. The DS1s will then be terminated into Knology's collocation space. TR-008 and TR303 interface standards are available.
2.9.2 USLC, using the Lucent Series 5 equipment, will be offered in two different systems. System A will allow up to 96 of Knology's sub-loops to be concentrated onto multiple DS1s. System B will allow an additional 96 of Knology's sub-loops to be concentrated onto multiple DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the RT site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to the CLEC's collocation space within the SWC that serves the RT where the CLEC's sub-loops are connected. USLC service is offered with or without concentration and with or without a protection DS1.
2.9.3 In these scenarios Knology would be required to place a cross-box, remote terminal (RT), or other similar device and deliver a cable to the BellSouth remote terminal. This cable would be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and would allow Knology's sub-loops to then be placed on the ULSC and transported to their collocation space at a DS1 level. 2.10 Unbundled Sub-Loop Feeder
Unbundled Sub-Loop. Intrabuilding Network Cable (USL-INC) (a.k.a. riser cable) is the distribution facility inside a subscriber’s building or between buildings on one customer’s same premises (continuous property not separated by a public street or road). USL-INC includes the facility from the cross-connect device in the building equipment room up to and including the point of demarcation, at the end user’s premises.
2.7.4.1 In a scenario that requires connection in a building equipment room, BellSouth will install, as described in Section 2.7.6, a cross connect panel for the purpose of accessing USL-INC pairs. The cross-connect panel will function as a single point of interconnection (SPOI) for USL-INC and will be accessible by multiple carriers as space permits. BellSouth will place cross-connect blocks in 25-pair increments for Rhythms’ use on this cross-connect panel. Rhythms will be responsible for connecting its facilities to the 25-pair cross-connect block(s).
Unbundled Sub-Loop. Intrabuilding Network Cable (USL-INC) (a.k.a. riser cable) is the distribution facility inside a subscribers’ building or between buildings on one customer’s same premises (continuous property not separated by a public street or road). USL-INC includes the facility from the cross-connect device in the building equipment room up to and including the point of demarcation, at the end user’s premises. Version 3Q00: 10/19/00
2.7.4.1 In a scenario that requires connection in a building equipment room, BellSouth will install a cross connect panel that will be installed for the purpose of accessing USL-INC pairs. The cross-connect panel will function as a single point of interconnection (SPOI) for USL-INC and will be accessible by multiple carriers as space permits. BellSouth will place cross-connect blocks in 25 pair increments for SBCT’s use on this cross-connect panel SBCT will be responsible for connecting its facilities to the 25 pair cross-connect block(s).
