Feasibility Study A feasibility study will identify the potential costs, service quality and other benefits which would result from contracting out the work in question. The cost analysis for the feasibility study shall not include the Employer’s indirect overhead costs for existing salaries or wages and benefits for administrative staff or for rent, equipment, utilities, and materials, except to the extent that such costs are attributable solely to performing the services to be contracted out. Upon completion of the feasibility study, the Employer agrees to furnish the Union with a copy if the feasibility study, the bid from the Apparent Successful Bidder and all pertinent information upon which the Employer based its decision to contract out the work including, but not limited to, the total cost savings the Employer anticipates. The Employer shall not go forward with contracting out the work in question if more than sixty percent (60%) of any projected savings resulting from the contracting out are attributable to lower employee wage and benefit costs.
Office of Inspector General Investigative Findings Expert Review In accordance with Senate Bill 799, Acts 2021, 87th Leg., R.S., if Texas Government Code, Section 531.102(m-1)(2) is applicable to this Contract, Contractor affirms that it possesses the necessary occupational licenses and experience.
Updated Information Submission by Developer The updated information submission by the Developer, including manufacturer information, shall occur no later than one hundred eighty (180) Calendar Days prior to the Trial Operation. Developer shall submit a completed copy of the Large Generating Facility data requirements contained in Appendix 1 to the Large Facility Interconnection Procedures. It shall also include any additional information provided to Connecting Transmission Owner for the Interconnection Feasibility Study and Interconnection Facilities Study. Information in this submission shall be the most current Large Generating Facility design or expected performance data. Information submitted for stability models shall be compatible with NYISO standard models. If there is no compatible model, the Developer will work with a consultant mutually agreed to by the Parties to develop and supply a standard model and associated information. If the Developer’s data is different from what was originally provided to Connecting Transmission Owner and NYISO pursuant to an Interconnection Study Agreement among Connecting Transmission Owner, NYISO and Developer and this difference may be reasonably expected to affect the other Parties’ facilities or the New York State Transmission System, but does not require the submission of a new Interconnection Request, then NYISO will conduct appropriate studies to determine the impact on the New York State Transmission System based on the actual data submitted pursuant to this Article 24.3. Such studies will provide an estimate of any additional modifications to the New York State Transmission System, Connecting Transmission Owner’s Attachment Facilities, or System Upgrade Facilities or System Deliverability Upgrades based on the actual data and a good faith estimate of the costs thereof. The Developer shall not begin Trial Operation until such studies are completed. The Developer shall be responsible for the cost of any modifications required by the actual data, including the cost of any required studies.
Study Period (a) The Buyer shall have the right, upon prior reasonable written notice to the Seller to examine the books and records relating to the Property, to enter upon the Land and to perform, at the Buyer’s expense, such economic, surveying, engineering, environmental, topographic and marketing tests, studies and investigations as the Buyer may deem appropriate, taking care to cause minimal interference with the business conducted on the Property; provided that (i) no invasive testing may be conducted without the Seller’s prior written consent, which may be withheld by the Seller in its sole discretion, and (ii) none of the Buyer or any of its representatives, lender, consultants and agents shall (x) cause any damage or make any physical changes to any of the Property or (y) intentionally or unreasonably interfere with the rights of Hotel guests or others who may have a legal right to use or occupy the Property or (z) otherwise intentionally or unreasonably interfere with the operation of the Property. The Seller or its representatives shall have the right to be present to observe any testing or other inspection performed on any of the Property. If for any reason, or no reason, the Buyer notifies the Seller, in writing, prior to 5:00 p.m. Central Time on the last day of the Study Period that it has determined not to proceed to Closing, this Agreement automatically shall terminate, the Xxxxxxx Money shall be immediately returned to the Buyer, and, upon return of the Xxxxxxx Money, the Buyer and the Seller shall have no further rights, liabilities or obligations hereunder (except as expressly survive the termination of this Agreement).
(b) Promptly after the Effective Date, and throughout the term of this Agreement as any of the materials listed in Schedule B become available to the Seller or are amended or updated, (to the extent not previously provided or made available to the Buyer) the Seller shall deliver to the Buyer, copies of such materials which are in, or come into, the Seller’s possession or control.
(c) Buyer hereby agrees to indemnify, defend and hold the Seller, and its employees, guests, contractors, tenants, manager and their respective invitees harmless from all personal injury or property damage suffered or incurred by or claimed against the foregoing arising directly out of any due diligence activities conducted or the entry upon the Land by any of Buyer, its representatives, lenders, consultant or agents, provided, however, such indemnity shall not cover liability arising from pre-existing conditions unless such pre-existing conditions are exacerbated by the Buyer or its consultants, agents, contractors, employees or representatives, in which case the Buyer shall be liable for and to the extent of the exacerbated condition and not the pre-existing condition. The Buyer, at its own expense, shall restore any damage to the Property caused by any of the tests or studies made by the Buyer, or its agents or contractors, but specifically excluding restoring or correcting any environmental or other damage to the Real Property that is discovered as a result of such tests or studies. The Buyer and any of its agents and contractors shall maintain at all times during their entry upon any of the Property for the purpose of conducting any due diligence activities, commercial general liability insurance with limits of not less than Two Million Dollars ($2,000,000) combined single limit, bodily injury, death and property damage insurance per occurrence. Upon the Seller’s request, Buyer (or its agents or contractor) will deliver a certificate issued by the insurance carrier of each such policy to the Seller prior to any entry upon any Property.
(d) The Buyer’s obligations under this SECTION 3.1 shall survive any termination of this Agreement or the Closing of the transaction contemplated herein.
Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Concession Area, including its abandonment.
Study An application for leave of absence for professional study must be supported by a written statement indicating what study or research is to be undertaken, or, if applicable, what subjects are to be studied and at what institutions.
Research Plan The Parties recognize that the Research Plan describes the collaborative research and development activities they will undertake and that interim research goals set forth in the Research Plan are good faith guidelines. Should events occur that require modification of these goals, then by mutual agreement the Parties can modify them through an amendment, according to Paragraph 13.6.
Inspections and Tests 26.1 The Supplier shall at its own expense and at no cost to the Procuring Entity carry out all such tests and/or inspections of the Goods and Related Services as are specified in the SCC.
26.2 The inspections and tests may be conducted on the premises of the Supplier or its Subcontractor, at point of delivery, and/or at the Goods' final destination, or in another place in Kenya as specified in the SCC. Subject to GCC Sub-Clause 26.3, if conducted on the premises of the Supplier or its Subcontractor, all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring Entity.
26.3 The Procuring Entity or its designated representative shall be entitled to attend the tests and/or inspections referred to in GCC Sub-Clause 26.2, provided that the Procuring Entity bear all of its own costs and expenses incurred in connection with such attendance including, but not limited to, all travelling and board and lodging expenses.
26.4 Whenever the Supplier is ready to carry out any such test and inspection, it shall give a reasonable advance notice, including the place and time, to the Procuring Entity. The Supplier shall obtain from any relevant third party or manufacturer any necessary permission or consent to enable the Procuring Entity or its designated representative to attend the test and/or inspection.
26.5 The Procuring Entity may require the Supplier to carry out any test and/or inspection not required by the Contract but deemed necessary to verify that the characteristics and performance of the Goods comply with the technical specifications codes and standards under the Contract, provided that the Supplier's reasonable costs and expenses incurred in the carrying out of such test and/or inspection shall be added to the Contract Price. Further, if such test and/or inspection impedes the progress of manufacturing and/or the Supplier's performance of its other obligations under the Contract, due allowance will be made in respect of the Delivery Dates and Completion Dates and the other obligations so affected.
26.6 The Supplier shall provide the Procuring Entity with a report of the results of any such test and/or inspection.
26.7 The Procuring Entity may reject any Goods or any part thereof that fail to pass any test and/or inspection or do not conform to the specifications. The Supplier shall either rectify or replace such rejected Goods or parts thereof or make alterations necessary to meet the specifications at no cost to the Procuring Entity, and shall repeat the test and/or inspection, at no cost to the Procuring Entity, upon giving a notice pursuant to GCC Sub- Clause 26.4.
26.8 The Supplier agrees that neither the execution of a test and/or inspection of the Goods or any part thereof, nor the attendance by the Procuring Entity or its representative, nor the issue of any report pursuant to GCC Sub-Clause 26.6, shall release the Supplier from any warranties or other obligations under the Contract.
Technical Feasibility of String While ICANN has encouraged and will continue to encourage universal acceptance of all top-‐level domain strings across the Internet, certain top-‐level domain strings may encounter difficulty in acceptance by ISPs and webhosters and/or validation by web applications. Registry Operator shall be responsible for ensuring to its satisfaction the technical feasibility of the TLD string prior to entering into this Agreement.
Updated Information Submission by Interconnection Customer The updated information submission by the Interconnection Customer, including manufacturer information, shall occur no later than one hundred eighty (180) Calendar Days prior to the Trial Operation. The Interconnection Customer shall submit a completed copy of the Electric Generating Unit data requirements contained in Appendix 1 to the LGIP. It shall also include any additional information provided to the Participating TO and the CAISO for the Interconnection Studies. Information in this submission shall be the most current Electric Generating Unit design or expected performance data. Information submitted for stability models shall be compatible with the Participating TO and CAISO standard models. If there is no compatible model, the Interconnection Customer will work with a consultant mutually agreed to by the Parties to develop and supply a standard model and associated information.
