Examples of Allowable Error in a sentence
ITU-R Recommendation F.1094-1, Maximum Allowable Error Performance and Availability Degradations to Digital Radio-Relay Systems Arising from Interference from Emissions and Radiations from Other Sources.
Any metering and accumulating equipment shall have sufficient accuracy so that any error resulting from such equipment shall not exceed ±0.5% of full scale ("Allowable Error").
Results from all DDL HbA1c methods are compared to the assigned target values obtained from the PT evaluation report (COM.04250 Comparability of Instruments/Methods) using the HbA1c CAP Total Allowable Error (pass/fail criteria) of ± 6%.
This is a particular challenge in the developing world and in contexts of protracted crises.36 Data collection efforts should account for the need for longitudinal data to adequately grasp longer-term processes and evolutions driving migratory patterns, such as climate change, demographic transitions, and structural transformation.
The allowable error in the circuit is computed by the following formula: Allowable Error = + 12 mm / K, where K = length of circuit, km This provides the survey crew a starting elevation to use as the bench mark elevation for the baseline bench marks following the double run bench mark circuit as shown in Figure 22-5A, Bench Level Notes.
The allowable error in the circuit is computed by the formula as follows: Allowable Error = + 0.05 ft / K where: K = length of circuit, mi This provides the survey crew a starting elevation to use as the bench mark elevation for the baseline bench marks following the double run bench mark circuit as shown in Figure 22-5A.
Allowable Error = 0.035 ft.E = Perimeter of level loop in miles (c) Data Requirements - Provide the following to the Engineer for each network or circuit established:• Raw Data - These are hand written field notes or hand-written field notes accompanied by electronic data files containing original measurements produced by the level.
Figure 9 Excerpt of 052 Pa. Code § 65.8. Meters – Allowable Error i.
Limits of Accuracy (Allowable Error) Limits of accuracy shall refer to the horizontal and vertical deviation that is permissible during the laying of sewer mains.
Otherwise, competition would result in a decline in above cost prices without any compensating charge in the below cost prices.