Asphalt prime coat definition

Asphalt prime coat means a low-viscosity liquid asphalt applied to an absorbent surface as the first of more than one asphalt coat.
Sample 1Sample 2Sample 3
Asphalt prime coat means an application of low viscosity liquid asphalt to an absorbent surface to prepare it for the application of an asphalt concrete surface.
Sample 1

Examples of Asphalt prime coat in a sentence

  • Pavement fabric shall be nonwoven, needle-punched polyester or polypropylene material and shall be Petromat 4599 or approved equal.4-02.04 Liquid Asphalt (prime coat) The liquid asphalt used for prime coat shall conform to the provisions of current Caltrans Specifications Section 93, “Liquid Asphalt,” and shall be Grade SC-70 unless otherwise directed by the Engineer.

  • Asphalt prime coat is excluded from profilograph testing, and not eligible for pay adjustments.

  • Asphalt prime coat'' means an application of low viscosity liquid asphalt to an absorbent surface to prepare it for the application of an asphalt concrete surface.

  • Asphalt prime coat: Apply at rate of 0.20 to 0.50 gallon per square yard, over compacted subgrade.

  • Thus, even after redemption, if the property returns to the mortgagor's hands, there would be a tie on the property and such a tie would make the whole agreement invalid.

  • Asphalt prime coat shall not be placed when surfaces are wet or when the air temperature is below 50°F.

  • Asphalt prime coat material and method of construction shall conform to section 311 of the Virginia Department of Transportation Road and Bridge Specifications.

  • Although concerns were raised that the Kenyan government would seek to shut down the internet during the 2017 presidential elections, it committed not to.

Related to Asphalt prime coat

  • Prime coat means the first of two or more films of coating applied to a metal surface.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Intermodal Rail Yard means a rail facility in which cargo is transferred from drayage truck to train or vice-versa.

  • SOQ means Statement of Qualifications.

  • LSD means lysergic acid diethylamide.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • PJM Interconnection, L.L.C. or "PJM" means the privately-

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Design torso angle means the angle measures between a vertical line through the "R" point and the torso line in a position which corresponds to the design position of the seat-back established by the vehicle manufacturer;

  • CM means City Manager of COE appointed in terms of Section 82 of the Local Government: Municipal Structures Act 117 of 1998

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • apron means a defined area intended to accommodate aircraft for purposes of loading or unloading passengers, mail or cargo, fuelling, parking or maintenance;

  • licensed water supplier means a company which is the holder for the time being of a water supply licence under Section 17A(1) of the 1991 Act(f);

  • MW means megawatt.

  • Supply Pipe means any part of a service pipe which a water undertaker could not be, or have been required to lay under section 46 of the Water Industry Act 1991; and

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • PVC means Price variation clause

  • Copper Loop A stand-alone Local Loop comprised entirely of copper wire or copper cable. Copper Loops include two-wire and four-wire analog voice-grade Copper Loops, digital Copper Loops (e.g., DS0s and Integrated Services Digital Network lines), as well as two-wire and four-wire Copper Loops conditioned to transmit the digital signals needed to provide digital subscriber line services, regardless of whether the Copper Loops are in service or held as spares. A Copper Loop includes attached electronics using Time Division Multiplexing (TDM) technology, but does not include packet, cell or frame switching capabilities.

  • Single coat means one film coating applied to a metal surface.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.