Bicycle Maintenance definition

Bicycle Maintenance means, at a minimum, that the following checks are performed on a Bicycle, with deficient elements repaired or replaced as necessary:
Sample 1Sample 2Sample 3
Bicycle Maintenance means, at a minimum, that the following checks are performed on a Bicycle, with deficient elements repaired or replaced as necessary: 1.35.1 Check tire pressure, and add air as may be needed, to recommended Pounds per Square Inch measurement; 1.35.2 Check tightness of handlebars, headset bearings, and full handlebar range of motion (left to right); 1.35.3 Check tightness of seat, seat post quick-release, and see that seat post moves freely in full range of motion (up and down); 1.35.4 Check brake function (front and rear); 1.35.5 Check grips for wear and brake levers for tightness and damage; 1.35.6 Check xxxx for tightness and correct function; 1.35.7 Check handlebar covers for damage and instruction stickers; 1.35.8 Check front basket for tightness and damage, and check bungee cord for wear; 1.35.9 Check for correct gears and shifter function through all 5 gears; 1.35.10 Check fenders (front and rear) for damage, and clean outside of fenders; 1.35.11 Check tires (front and rear) for damage or wear; 1.35.12 Check wheels (front and rear) for trueness, broken or bent spokes and hub or axle tightness; 1.35.13 Check LED lights (front and rear) for function; 1.35.14 Check reflectors on wheels, seat and basket, to ensure they are present, clean, and undamaged; 1.35.15 Check pedals and cranks for tightness; 1.35.16 Lubricate and clean chain and check chain tensioner for correct function; 1.35.17 Check kickstand for correct function; and 1.35.18 Take brief test ride to ensure overall correct function of Bicycle.
Sample 1

Examples of Bicycle Maintenance in a sentence

  • Bicycle Maintenance Facilities means an area for bicycle repairs and maintenance which may include work space, a repair stand and an air pump for inflating bicycle tires.

  • Class 1 Bicycle Maintenance funds are proportionately disbursed based upon local agency reported Class 1 bicycle miles on an annual basis. TDA Articles 4 and 8 are apportioned by the Commission each June.

  • Per Man-Hour Labor Rate for All Other Maintenance or Repair Services for Trek Bicycles: Line Item #7 DOF may request additional maintenance or repair work other than or in addition to the "Basic Bicycle Maintenance and Repair Job Types at Fixed Labor Rates" as described in Line Items 1 through 6 above.

  • Where there is sufficient interest, additional roles of Fundraiser, Race Director, Bicycle Maintenance Manager and/or General Committee members may also be agreed up to a total committee of twelve.

  • Organs (cs)Organisation3410101000 West Mamprusi District - Wa Location Code0820100 West Mamprusi - Walewale tivity0000000.0 0.0 0.0159,620 Ac Wages and Salaries21110 Established Position2111001 Established Post21112 Other Allowances2111201 Motorbike Allowance2111202 Bicycle Maintenance Allowance2111203 Car Maintenance Allowance159,620158,588158,5881,03248504480Use of goods and services1,251 Objective1.

  • Bicycle Maintenance 101 at Mikes Bike ShopMonday, March 19, 7:00 – 8:00 p.m.Learn how to maintain your bike for the upcoming bicycle season at Mikes Bike Shop in Palatine.

  • This could be in the form of a designated, secure, well ventilated room/closet that can only be accessed by the same staff as those accessing the bicycle enclosure.12.6.4.4 Bicycle Maintenance FacilitiesIt is desirable to provide basic bicycle maintenance facilities and equipment in employee and student secure enclosures.

  • Class 1 Bicycle Maintenance funds are proportionately disbursed based upon claimant reported Class 1 bicycle miles on an annual basis.• TDA LTF Articles 4 and 8 are apportioned by the Commission each June.

  • Bicycle Maintenance Facilities: Update the TDM Plan/Architectural plans to note and dimension the location of facilities.

  • Bicycle Maintenance Facilities • Note and dimension location of facilities on plans.

Related to Bicycle Maintenance

  • Routine maintenance means actions performed on a regular or controllable basis or in response to uncontrollable events upon a highway, road, street, or bridge. Routine maintenance includes, but is not limited to, 1 or more of the following:

  • Software Maintenance means the process of modifying software after delivery to correct faults, improve performance or other attributes, or adapt to a changed environment. (Reference ISO/IEC 14764:2006, as amended or superseded.) Software maintenance does not include any customization or configuration.

  • Preventive Maintenance means that maintenance, performed on a scheduled basis by the Contractor, which is designed to keep the Equipment in proper operating condition.

  • Preventative Maintenance means the routine, customary or regular course of procedure related to the care or upkeep of an existing Department facility or system, which may also include inspection services provided as part of a preventative maintenance program. Preventive maintenance is conducted to keep equipment working and/or extend the life of the equipment.

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • Major maintenance means the adjustment, repair or replacement of a component or module that could affect the accuracy of a measurement.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under Section 175A of the CAA, as amended.

  • Emergency Maintenance means any period of maintenance for which, due to reasons beyond its reasonable control, Sprint Convergence is unable to provide prior notice of.

  • Operation and Maintenance or “O&M” shall mean all activities required to operate, maintain, and monitor the effectiveness of the RA as specified in the SOW or any EPA-approved O&M Plan.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Corrective Maintenance means the maintenance which is required when an item has failed or worn out, to bring it back to working order, which may also include those services necessary to partially restore, renew or strengthen an existing Department facility or system, following damage caused by use or normal wear and tear.

  • Period of Maintenance means the specified period of maintenance from the date of completion of the works, as certified by the Engineer.

  • Operation and Maintenance Expenses or ‘O&M expenses' means the expenditure incurred on operation and maintenance of the project, or part thereof, and includes the expenditure on manpower, repairs, spares, consumables, insurance and overheads;

  • maintenance order , in relation to a court, means an order made by a court —

  • Maintenance Term means the period of time for which Customer has purchased Maintenance Services, as evidenced by the Purchase Order delivered by Customer in connection therewith, together with all renewals effected in accordance with Section 4 of this Agreement.

  • Operations and maintenance means a project delivery method in which the District enters into a single contract for the routine operation, routine repair, and routine maintenance of an infrastructure facility.

  • Scheduled Maintenance means any adjustment, repair, removal, disassembly, cleaning, or replacement of components or systems required by the manufacturer which is performed on a periodic basis to prevent part failure or equipment or engine malfunction, or anticipated as necessary to correct an overt indication of malfunction or failure for which periodic maintenance is not appropriate.

  • Maintenance and Support Services means the services provided by Contractor under Appendix F.

  • Maintenance work means the repair of existing facilities when the size, type or extent of such facilities is not thereby changed or increased. While “maintenance” includes painting and decorating and is covered under the law, it does not include work such as routine landscape maintenance or janitorial services.

  • Support and Maintenance Services means the support and maintenance services described in Section 1 of these Support Terms.

  • Furniture maintenance product means a wax, polish, conditioner or any other product designed for the purpose of polishing, protecting or enhancing finished wood surfaces other than floors but does not include dusting aids, wood cleaners, products designed solely for the purpose of cleaning and products designed to leave a permanent finish such as stains, sanding sealers and lacquers.

  • Operation and Maintenance Costs means the costs of:

  • Deferred Maintenance means improvements necessary for continued operations which do not improve productivity or alter the process technology.

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production.

  • Maintenance and Support means updates, upgrades, patches, fixes, etc. and technical support provided for the Products and Services that Supplier is required to provide directly to DXC or a DXC Customer.