Completion of Unloading definition

Completion of Unloading means, following the Unloading of an LNG Tanker, the situation where all LNG discharge and return lines have been disconnected and such LNG Tanker has been cleared by the Operating Company for departure. [“Completamento della Discarica” in the Italian text]
Sample 1Sample 2Sample 3
Completion of Unloading means the time (after the unloading of the LNG Ship or, in the case of Clauses 7.16, 7.18, 7.20 and 7.22 only, after the unloading of the LNG Ship or a failure to unload the LNG Ship) at which LNG unloading and vapor return lines have been finally disconnected at the Discharge Port (or, if the LNG Ship has not been connected to the LNG unloading and vapor return lines at the Discharge Port, at the time at which the failure to deliver or take (as applicable) the relevant LNG Cargo arises);
Sample 1Sample 2
Completion of Unloading means, in respect of a DES delivery, the disconnection of the flange coupling of the cargo manifold of an LNG Vessel from the flange coupling on the unloading line at Buyer’s Facilities following unloading of the LNG Vessel and completion of final gauging.
Sample 1

Examples of Completion of Unloading in a sentence

  • Buyer shall, within forty-eight (48) hours following Completion of Unloading, notify Seller or cause Seller to be notified of the quality of the LNG unloaded from the LNG Ship by provision of a written notice, the form of which is to be agreed by the Parties.

  • Seller shall, within forty-eight (48) hours following Completion of Unloading, notify Buyer of the volume of LNG unloaded.

  • If the Quantity Delivered and/or the Price in respect of an LNG Cargo is not capable of being finally determined in accordance with Clause 10.3 promptly following Completion of Unloading in respect of such LNG Cargo, Seller shall provide Buyer with a preliminary invoice as soon as practicable after Completion of Unloading.

  • For purposes hereof, the “Initial Gas Day” shall mean the first Gas Day that commences after the expiration of the twenty four (24) hour period immediately following the Completion of Unloading.

  • Buyer shall, on a reasonable efforts basis within twenty-four (24) hours but in no event later than forty-eight (48) hours after Completion of Unloading, complete a laboratory analysis and calculations to determine the quality and BTU content of the LNG unloaded, in accordance with the provisions of Annex I, and shall promptly furnish to Seller or its representative a copy of the laboratory analysis with respect thereto.

  • Used Laytime shall however recommence two (2) hours after Completion of Unloading if the LNG Vessel is delayed in its departure due to Buyer's purposes and shall continue until the termination of such delay.

  • If the crossover lines are liquid filled (cold) when measurement is taken before unloading commences, they will remain full (cold) until measurement is taken following the Completion of Unloading.

  • The adipocyte regulates the fat it stores, partly through its own gene products.

  • Notwithstanding that the point of sale, purchase and title transfer for the LNG is as provided in Section 9, the quantity of LNG delivered, sold and purchased shall be determined immediately after Completion of Loading, in the case of an FOB delivery, or Completion of Unloading, in the case of a DES delivery, of each LNG Vessel.

  • Seller shall, on a reasonable efforts basis, furnish to Buyer by e-mail or facsimile an invoice within seven (7) days after Completion of Unloading stating the amount of the Contract Price.


More Definitions of Completion of Unloading

Completion of Unloading means the time (after the unloading of the relevant Cargo at the Receiving Facilities) at which the last transfer pump has been stopped, the liquid manifolds closed so as to prevent any further LNG transfer taking place and the LNG unloading and vapour return lines have been fully disconnected.
Sample 1

Related to Completion of Unloading

  • Completion of work means completion of the entire contracted work. Exhaustion of quantity of any particular item mentioned in the bid document shall not imply completion of work or any component thereof.

  • Completion of Services means..................................................

  • construction site means a workplace where construction work is being performed;

  • Construction Plant means appliances, machinery with necessary supply to up keep and maintenance of the works or temporary works but dose not include materials or other things intended to form part of the permanent work.

  • Construction Zone shall have the meaning set forth in Clause 8.3 (i);

  • Service delivery area means the defined geographic area for delivery of program services.

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • Commissioning means the process for determining the need for and for obtaining the supply of healthcare and related services by the Trust within available resources.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • service delivery and budget implementation plan means a detailed plan approved by the mayor of a municipality in terms of section 53(1) (c) (ii) for implementing the municipality’s delivery of municipal services and its annual budget.

  • Interconnection Construction Service Agreement means the agreement entered into by an Interconnection Customer, Interconnected Transmission Owner and the Transmission Provider pursuant to Tariff, Part VI, Subpart B and in the form set forth in Tariff, Attachment P, relating to construction of Attachment Facilities, Network Upgrades, and/or Local Upgrades and coordination of the construction and interconnection of an associated Customer Facility. A separate Interconnection Construction Service Agreement will be executed with each Transmission Owner that is responsible for construction of any Attachment Facilities, Network Upgrades, or Local Upgrades associated with interconnection of a Customer Facility.

  • Construction Completion means physical construction of a cleanup action component is complete.

  • Mechanical Completion means that (a) all components and systems of the Project have been properly constructed, installed and functionally tested according to EPC Contract requirements in a safe and prudent manner that does not void any equipment or system warranties or violate any permits, approvals or Laws; (b) the Project is ready for testing and commissioning, as applicable; (c) Seller has provided written acceptance to the EPC Contractor of mechanical completion as that term is specifically defined in the EPC Contract.

  • Construction Completion Date means the Completion Date of the Construction as specified in the Statutory Declaration of Completion for the Project;

  • Construction Service Agreement means either an Interconnection Construction Service Agreement or an Upgrade Construction Service Agreement.

  • Project Implementation Unit or “PIU” means the unit referred to in Section I.A.1 of Schedule 2 to this Agreement.

  • Construction waste means solid waste which is produced or generated during construction, remodeling, or repair of pavements, houses, commercial buildings, and other structures. Construction wastes include, but are not limited to lumber, wire, sheetrock, broken brick, shingles, glass, pipes, concrete, paving materials, and metal and plastics if the metal or plastics are a part of the materials of construction or empty containers for such materials. Paints, coatings, solvents, asbestos, any liquid, compressed gases or semi-liquids and garbage are not construction wastes.

  • Substantial Completion means the stage in the progress of the work as determined and certified by the Contracting Officer in writing to the Contractor, on which the work (or a portion designated by the Government) is sufficiently complete and satisfactory. Substantial completion means that the property may be occupied or used for the purpose for which it is intended, and only minor items such as touch-up, adjustments, and minor replacements or installations remain to be completed or corrected which:

  • Construction sign means a sign which identifies the architect, engineers, contractors and other individuals or firms involved with the construction of a building, or announces the character of the building or enterprise, which is erected during the building construction period.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Locational Deliverability Area Reliability Requirement means the projected internal capacity in the Locational Deliverability Area plus the Capacity Emergency Transfer Objective for the Delivery Year, as determined by the Office of the Interconnection in connection with preparation of the Regional Transmission Expansion Plan, less the minimum internal resources required for all FRR Entities in such Locational Deliverability Area.

  • Office of the Interconnection Control Center means the equipment, facilities and personnel used by the Office of the Interconnection to coordinate and direct the operation of the PJM Region and to administer the PJM Interchange Energy Market, including facilities and equipment used to communicate and coordinate with the Market Participants in connection with transactions in the PJM Interchange Energy Market or the operation of the PJM Region.

  • Improvement completion assurance means a surety bond, letter of credit,

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this chapter, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, oxygen or carbon dioxide concentrations), and to record average operational parameter value on a continuous basis.

  • Debilitating medical condition means one or more of the following:

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.