Contract Article definition

Contract Article means any article which uses the design produced under the Contract(s) and includes any sub-assemblies, components or spares thereof;
Sample 1Sample 2Sample 3

Examples of Contract Article in a sentence

  • However, the Buyers shall accept the vessel if the Original Buyer is obliged to take delivery of the Vessel under the Shipbuilding Contract Article III, always with the provision that any liquidated damages are transferred to the benefit of the Buyers.

  • The Sellers shall make sure that all changes pursuant to the Shipbuilding Contract Article V, clause 2(b) are carried out unless otherwise instructed by the Buyers.

  • If the Buyer decides to increase the standard and/or quality in excess of the lump sum set out in this item 2, the Contract Article VI shall apply and any costs incurred as a result hereof plus a [*].

  • Validity, modification, rescission, termination of the Contract Article 10.

  • In the aggregate lump sum included in the Contract Article Ill, clause 1, a [*] for the Builder is added to the lump sums set out herein.

  • Article 1 ( Definitions and Interpretation), Article 11 (Confidentiality), Article 12.4 (Amendment and Waiver), Article 12.5 (Costs), Article 12.6 (Notices), Article Right regulated under 12.7 (Copies), Article 12.8 (Severability and Amendment), Article 12.9 (Enforcement of Contract), Article 12.10 (Rights of Third Parties), Article 12.11 (Remedies and Waivers) and Article 12.12 (Dispute Resolution) and its liabilities shall survive after the termination of this Contract.

  • The criteria for ATR completion and GBBF Subsystem Acceptance are defined in Contract Article 11.2.2. A detailed Acceptance Test Report, CDRL 30, shall be prepared and sent to Purchaser at completion of GBBF Subsystem ATR plus [*] days.

  • The following Article shall apply to the Subscribing Reinsurer's share in the attached Contract, in lieu of the provisions of Article XXIV - Intermediary - of the Contract: "Article XXIV - Intermediaries X.

  • For purposes of this Contract, Article 10 of the "General Terms and Conditions of Purchase" dated April, 1994 (Exhibit A), entitled "Intellectual Property Rights", shall suspersede the NDA.

  • In the event Contractor is delayed in completing the Work required to be completed to satisfactorily achieve completion of a liquidated damages milestone, marked with X, by the date stated against the liquidated damages milestones in Section 2, Contractor shall be liable to pay liquidated damages pursuant to the Conditions of Contract Article 24.2, and calculated in accordance with Appendix B.

Related to Contract Article

  • Model Articles means the model articles for private companies limited by guarantee contained in Schedule 2 of the Companies (Model Articles) Regulations 2008 (SI 2008/3229) as amended prior to the date of adoption of these Articles;

  • Covered article means any hardware, software, or service that–

  • these Articles means these articles of association as altered from time to time and the expression “this article” shall be construed accordingly;

  • the Articles means these Articles of Association of the Academy Trust;

  • Regulated article means any article of any character carrying or capable of carrying the Boll Weevil, including, but not limited to, cotton plants, seed cotton, cottonseed, other hosts, gin trash, gin equipment, mechanical cotton pickers, and other equipment associated with cotton production, harvesting, or processing.

  • Single-service articles means cups, containers, lids, closures, plates, knives, forks, spoons, stirrers, paddles, straws, napkins, wrapping materials, toothpicks, and similar articles intended for one-time, one-person use and then discarded.

  • Remarketing Procedures means the procedures for conducting Remarketings set forth in Part II of these Articles Supplementary.

  • Staff Vetting Procedure means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • Life-giving procedure is defined as a medically-supervised procedure involving the testing, sampling, or donation of blood, platelets, organs, fluids, tissues, and other human body components for the purposes of donation, without compensation, to a person or organization for medically necessary treatments. Employees will provide reasonable advance notice and written proof from an accredited medical institution, physician or other medical professional that the employee participated in a life-giving procedure. Agencies may take into account program and staffing replacement requirements in the scheduling of leave for life-giving procedures.

  • Company Articles means the Articles of Incorporation of the Company, as amended.

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Rights Offering Procedures means the procedures with respect to the Rights Offering that are approved by the Bankruptcy Court pursuant to the Disclosure Statement Order and shall be in form and substance reasonably acceptable to the Debtors and the Required Backstop Parties.

  • Staff Vetting Procedures means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • DMF means any drug master file filed with the FDA, and any equivalent filing in other countries or regulatory jurisdictions.

  • Remarketing Materials means (i) the Fund’s most recent annual report and, if available, subsequent semi-annual report, which shall be deemed to have been made available upon the electronic availability of any such document on a public website, (ii) the most recent annual and, if available, interim report of the Liquidity Provider, which shall be deemed to have been made available upon the electronic availability of any such document on a public website, (iii) such other publicly available information as the Fund or the Liquidity Provider or the Remarketing Agent, if applicable, may reasonably request from time to time, of the Liquidity Provider, the Fund or the Remarketing Agent, and such other documentation, representations, warranties and certifications as the Fund, the Liquidity Provider or the Remarketing Agent, if applicable, may reasonably request, it being understood that the Fund, the Liquidity Provider or the Remarketing Agent, if applicable, may, in its discretion, determine to deliver to purchasers and prospective purchasers, in connection with the offer and sale of VRDP Shares by the Liquidity Provider, a Remarketing Memorandum, and (iv) such other publicly available information necessary, in the opinion of counsel for the Fund, the Liquidity Provider or the Remarketing Agent, if applicable, to amend or supplement the foregoing materials, in order that the foregoing materials will not include any untrue statements of a material fact or omit to state a material fact necessary in order to make the statements therein not misleading in the light of the circumstances existing at the time made available to or delivered to a purchaser.

  • Contact adhesive means a non-aerosol adhesive that: (i) is designed for application to both surfaces to be bonded together, and (ii) is allowed to dry before the two surfaces are placed in contact with each other, and (iii) forms an immediate bond that is impossible, or difficult, to reposition after both adhesive- coated surfaces are placed in contact with each other, and (iv) does not need sustained pressure or clamping of surfaces after the adhesive-coated surfaces have been brought together using sufficient momentary pressure to establish full contact between both surfaces. “Contact Adhesive” does not include rubber cements that are primarily intended for use on paper substrates. “Contact Adhesive” also does not include vulcanizing fluids that are designed and labeled for tire repair only.

  • Access Codes means the unique codes which the Client will determine to enable his/her access to the trading platform of the Company and/or to his/her Trading Account through the Company’s electronic systems.

  • Ordering Procedures means the ordering and award procedures specified in Clause 6 (Ordering Procedures) and Framework Schedule 5 (Ordering Procedure);

  • Redeemable means, with respect to any Equity Interest, any Debt or any other right or Obligation, any such Equity Interest, Debt, right or Obligation that (a) the issuer has undertaken to redeem at a fixed or determinable date or dates, whether by operation of a sinking fund or otherwise, or upon the occurrence of a condition not solely within the control of the issuer or (b) is redeemable at the option of the holder.

  • Amended Articles means the amended articles of JMB, reflecting the alterations to the Original Articles as provided for in the Plan, substantially in the form attached as Schedule “A” to the Plan;

  • Authorizing Resolution means a resolution adopted by the Board of Directors or by an Officer or committee of Officers pursuant to Board delegation authorizing a Series of Securities.

  • prohibited article means an article the introduction or removal of which into or out of a prison is prohibited by any rule under this Act.

  • Tendering Process means the process commenced by the issuing of this Request for Proposals and concluding upon formal announcement by the DBSA of the selection of a successful Bidder(s) or upon the earlier termination of the process.