Delivery Check definition

Delivery Check is defined in Section 3.2.3.
Sample 1Sample 2
Delivery Check means the accomplishment of all tasks which are necessary pursuant to the MPD as in effect on the date which is three months prior to the Delivery Date (including all non-routine work generated as a result of performance of such MPD tasks) to clear the Aircraft for [REDACTED: Item 1] of operation from the Delivery Date. If pursuant to the MPD, the performance interval for a task is shorter than [REDACTED: Item 1], then such task will also be performed. For avoidance of doubt, if the inspection interval pursuant to the MPD for a particular task only refers to one or two of the three measurements above (i.e., months, Flight Hours or Cycles), then only those particular measurements referred to in the MPD will be utilized in determining whether the task must be performed.
Sample 1Sample 2
Delivery Check means the accomplishment of all tasks which are necessary pursuant to the MPD (including all non-routine work generated as a result of performance of such MPD tasks) to clear the Aircraft for months, hours and cycles of operation from the Delivery Date. If pursuant to the MPD, the performance interval for a task is shorter than every months, hours or cycles, then such task will also be performed. For avoidance of doubt, if the inspection interval pursuant to the MPD for a particular task only refers to one or two of the three measurements above (i.e., months, hours or cycles), then only those particular measurements referred to in the MPD will be utilized in determining whether the task must be performed.
Sample 1Sample 2

Examples of Delivery Check in a sentence

  • Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Operator’s Manual are completed before releasing equipment to the owner.The dealer must complete the Warranty Registration Card attached to the front inside cover of this manual and return to J.

  • The present document constitutes a call for evidence to be submitted to the European Commission services in relation to this report (the Report).

  • In the event of any such omission, the Licensor shall within thirty (30) days remedy such omission, where after a new Delivery Check in accordance with the above may be conducted.

  • SECTION III provider Academic/ Instruction Information Mode of Instructional Delivery: Check all that apply.

  • Where some or all the goods are rejected at the Proof of Delivery Check, then the delivery documentation or electronic proof-of-delivery device will be amended or not signed as considered appropriate by TWG.

  • If “yes”, list in the space provided the birth defects and any factors that may have had an impact on this outcome, as well as any information on birth defect attribution.• Gestational Age: Indicate the gestational age of the infant/fetus at outcome.• Birth Weight: Indicate the weight (in grams) of the infant/fetus at outcome.• Method of Delivery: Check the method of delivery.

  • Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists are completed before releasing equipment to the owner.The dealer must complete the Warranty Registration found on the Dealer Portal website located at dealer.jm-inc.com and return it to J&M Mfg.

  • Functional Assembly Delivery Check – to be done upon the last partial delivery of a Functional Assembly meeting the acceptance criteria; result: documented in the delivery section of the specific form (Acceptance protocol for FUNCTIONAL ASSEMBLY).

  • If “yes”, list in the space provided the birth defects and any factors that may have had an impact on this outcome, as well as any information on birth defect attribution. Gestational Age: Indicate the gestational age of the infant/fetus at outcome. Birth Weight: Indicate the weight (in grams) of the infant/fetus at outcome. Method of Delivery: Check the method of delivery.

  • Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists are completed before releasing equipment to the owner.The dealer must complete the Warranty Registration found on the Dealer Portal website located at dealer.jm-inc.com and return it to J.


More Definitions of Delivery Check

Delivery Check is defined in Section 3.2.3. TEMPLATE VERSION 191016
Sample 1

Related to Delivery Check

  • Delivery Instructions means the instructions set out in the Contract for the provision of the Goods and Services, including any other information the Authority considers appropriate to the provision of the Goods and Services.

  • Delivery Charge means the total amount charged to the Authorized User for shipment of the Vehicle(s) from the Delivery Origin to the location(s) designated by the Authorized User on Form A: Mini-Bid Request, and on the Purchase Order.

  • Delivery vessel means tank trucks or trailers equipped with a storage tank and used for the transport of gasoline from sources of supply to stationary tanks of gasoline dispensing facilities.

  • Delivery charges means charges by the seller for preparation and delivery to a location designated by the purchaser of tangible personal property or services. Delivery charges include, but are not limited to, transportation, shipping, postage, handling, crating, and packing. Beginning September 1, 2004, delivery charges do not include the charges for delivery of direct mail if the charges are separately stated on an invoice or similar billing document given to the purchaser. If a shipment includes both exempt property and taxable property, the seller shall allocate the delivery charge using 1 of the following methods:

  • Delivery Month means each month specified as such by the Exchange pursuant to

  • Delivery Schedule means the schedule for the delivery of Services as set forth in attached Annex 3.

  • Delivery Time means the time for Delivery stated in the Purchase Order.

  • Delivery Day means a day other than a Saturday, a Sunday or any other day on which national banking associations are authorized to be closed. Any party may change its address for purposes of the receipt of notices and demands by giving notice of the change in the manner provided in this provision.

  • Delay Delivery Certification As defined in Section 2.02(a) hereof.

  • Delivery Location means the Supplier's premises or other location where the Services are to be supplied, as set out in the Order;

  • Firm Order Confirmation or "FOC" means the notice CenturyLink provides to CLEC to confirm that CLEC's Local Service Order (LSR) has been received and has been successfully processed. The FOC confirms the schedule of dates committed to by CenturyLink for the Provisioning of the service requested.

  • Delivery Year means the Planning Period for which a Capacity Resource is committed pursuant to the auction procedures specified in Tariff, Attachment DD, or pursuant to an FRR Capacity Plan under Reliability Assurance Agreement, Schedule 8.

  • Delivery Notice Has the meaning specified in the NPA.

  • IITK Purchase Order means the IITK’s official Purchase Order document;

  • Dispatch Instruction has the meaning set forth in the CAISO Tariff.

  • Delivery Note means any separate piece of paper of such colour and size as readily to permit of a clear and legible statement being made thereon and actually bearing such a statement of all information required by the Act and these regulations to be furnished in respect of any goods actually being delivered to a purchaser;

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Redelivery means the delivery of gas, excluding Firm Gas and Unauthorized Gas, to a Customer by KUB.

  • Purchase Order means the form or format a Customer uses to make a purchase under the Contract (e.g., a formal written purchase order, electronic purchase order, procurement card, contract or other authorized means).

  • Delivery Site means the places specified in the Delivery Schedule for the purpose of Delivery or Installation of the Supplies and Services, or any other places nominated by the Engineer and notified in writing to the Contractor;

  • Periodic Billing Requirement means, for any Remittance Period, the aggregate amount of Charges calculated by the Servicer as necessary to be billed during such period in order to collect the Periodic Payment Requirement on a timely basis.

  • Delivery service means the providing of electric transmission or distribution to a retail customer.

  • Delivery Services means those services provided by the

  • Purchase Order (PO) means a written offer made by a purchaser to a supplier formally stating the terms and conditions of a proposed transaction.

  • Delivery sale means any sale of a vapor product to a

  • The Purchase Order means the order placed by the Purchaser on the Supplier signed by the Purchaser including all attachments and appendices thereto and all documents incorporated by reference therein. The purchase order shall be deemed as "Contract" appearing in the document.