Engineering college definition

Engineering college means a school, college, university, department of a university or other educational institution, reputable and in good standing in accordance with rules prescribed by the Department, and which grants baccalaureate degrees in engineering.
Engineering college means a school, college, university, department of a university or other educational institution located in Illinois which grants baccalaureate degrees in engineering and which is reputable and in good standing in accordance with the rules prescribed by the Department of Professional Regulation. (Section 4 of "The Professional Engineering Act", Ill. Rev. Stat. 1987, ch. 111, par. 5106.)
Engineering college means an engineering college, satisfactory to the Bank, which is selected by DOE to participate in the Project;

Examples of Engineering college in a sentence

  • The quality of cement and steel used to the work by the tenderer to be tested as perISI specification in the PWD quality control lab / Government Engineering college lab / Government recognized lab at his own cost and the test result shall be produced to the site Engineer-in-charge and the same shall be confirmed by the site in-charge.c].

  • The quality of cement and steel used to the work by the tenderer to be tested as per ISI specification in the PWD quality control lab / Government Engineering college lab / Government recognized lab at his own cost and the test result shall be produced to the site Engineer-in-charge and the same shall be confirmed by the site in-charge.c].

  • Vidya Academy of Science & Technology Technical Campus (VAK), Kilimanoor is the second Engineering college of Vidya International Charitable Trust (VICT), a NRI venture functioning in the higher educational field of Kerala State since 2001.

  • Participants: The forty five volunteers (students and faculty at the Engineering college of Copenhagen; 31 men and 14 women; average age =24.5, sd=4.6) were randomly as- signed to one of the three groups (audio only, haptic only or audio-haptic) for a total of 15 participants per condition.

  • As the concrete mix is more than M20 grade, the mix will be design as per I.S. code and approved by IIT or Government Engineering college at the cost of contractor.

  • The Institute confirms the active participation and the contribution of women in all its signature moves, such as leading and making a decision.Transdisciplinary courses are offered to promote awareness of the significance of women in Indian Society.National Engineering college has a cell for Women Empowerment.The main focus of this cell is to encourage and empower women to focus on self-confidence, autonomy for women and equity.

  • Regional Research Labs, Government approved labs, Engineering college, Command Lab, Zonal Lab, etc as per the recommended minimum frequency per clause 8.5.1.4 and 8.5.2.2. In order to undertake Department testing, requisite facilities shall be organized by the contractor.

  • Tech in Electronics and Communication / IT/ Computer Science/ or MSc. Mathematics/ MCA or equivalent qualification from top 100 Engineering college Universities in India (as per NIRF ranking). Minimum five years of experience in any Govt.

  • The Bapatla Engineering college has a complex and resource rich information technology environment upon which there is increasing reliance to provide mission-critical academic, instructional and administrative functions.

  • Department of Chemistry has been conducted 15 days AICTE short term course for Engineering college staff members on Energy systems during the year 1999.


More Definitions of Engineering college

Engineering college means an institution offering and conducting engineering courses at under graduate, post graduate and research level and functions in accordance with the rules, guidelines and procedures of, and with the approval of, the AICTE and in accordance with the provisions of this Ordinance, Statutes, Ordinances and Regulations;
Engineering college as used herein shall mean the Collage shall be either Govt. College of engineering, NIT, 2T or well established private autonomous engineering college.

Related to Engineering college

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • Engineering Services means infrastructure for –

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.

  • SCD means current City of Winnipeg Parks Planning Standard Construction Detail Drawings.

  • Geotechnical engineer means a Professional Engineer whose principal field of specialization is the design and Construction of earthworks in a permafrost environment.

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Regulatory Floodway means the channel of a river or other watercourse and the adjacent land areas that must be reserved in order to discharge the base flood without cumulatively increasing the water surface elevation more than a designated height.

  • conformity assessment body means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

  • Engineering Consultant means a person or firm that has the expertise in the engineering aspects of the type of system by which the withdrawn area is receiving service that is necessary to make the determination required under Subsections (5)(f) and (g).

  • conformity assessment means the process demonstrating whether the requirements of this Regulation relating to a device have been fulfilled;

  • Project Engineer means the surveyor or engineer employed by or private

  • Site Assessment means a Site Assessment as defined in Paragraph 10(c).

  • Design torso angle means the angle measures between a vertical line through the "R" point and the torso line in a position which corresponds to the design position of the seat-back established by the vehicle manufacturer;

  • Screening Test Technician (STT) means anyone who instructs and assists individuals in the alcohol testing process and operates an ASD.

  • Phase II means the second part of the tuition incentive assistance program which provides assistance in the third and fourth year of 4-year degree programs.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Architect/Engineer means the person designated by the Commissioner to provide the Contract drawings and Detailed Specifications for the Work you are to perform.

  • Architect/Engineer (A/E means a person registered as an architect pursuant to Tex. Occ. Code Ann., Ch. 1051, as a landscape architect pursuant to Tex. Occ. Code Ann., Ch. 1052, a person licensed as a professional engineer pursuant Tex. Occ. Code Ann., Ch. 1001, and/or a firm employed by Owner or Design-Build Contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • Engineer-in-Charge/Consultant/Architect : This term shall mean any authorized representative or person specifically deputed by the Employer wherever they are employed from time to time by the Employer.

  • The Works/Project means the works to be executed or done under this contract.

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Project Management Report means each report prepared in accordance with Section 4.02 of this Agreement;

  • Development Authority means the New Jersey Schools

  • Medical management technique means a practice which is used to control the cost or utilization of health care services or prescription drug use. The term includes, without limitation, the use of step therapy, prior authorization or categorizing drugs and devices based on cost, type or method of administration.