Exhaust Emission Test definition

Exhaust Emission Test means the determination of the amount of specified gases in a vehicle’s exhaust by use of the ASM test or the 2-speed idle (TSI) test.
Exhaust Emission Test means the determination of the amount of specified gases in a vehicle’s exhaust by use of the ASM test or the 2-speed idle (TSI) test, as defined in the I/M Test Manual. The test procedures to be performed by certified inspectors shall be as specified in the Emissions Inspector Certification Training Program Manual.
Exhaust Emission Test means the curb idle test. or two-speed idle tests.

Examples of Exhaust Emission Test in a sentence

  • Subpart H – Cold Temperature Test Procedures [n/a] 30Subpart I – Exhaust Emission Test Procedures for Motor Vehicles 301066.801 Applicability and general provisions.

  • In addition, ACr shall be applied to the emission adjustment credit for certain EZEV-qualifying HEVs as discussed below in the Exhaust Emission Test section.

  • Exhaust Emission Test Vehicle Description The vehicle here following selected is a carry over from 2021MY and was used for FTP75 testing, HWFE testing, US06 testing, SC03 testing, FTP50 testing and FTP20 testing.

  • Off-Vehicle Charge Capable Hybrid Electric Vehicle Exhaust Emission Test Sequence.

  • With the exception of the ARB/Industry test programs described below, detailed descriptions of these test programs have already been published in aU.S. EPA document3 and in the SAE paper 94-CO16, “The Execution of a Cooperative Industry- Government Exhaust Emission Test Program.” The interested reader is advised to refer to these documents for descriptions of these programs.

  • Exhaust Emission Test: Checks exhaust emission level of petrol driven vehicles A probe is inserted into the exhaust pipe to collect gas sample for measurement.


More Definitions of Exhaust Emission Test

Exhaust Emission Test means the idle or two-speed idle tests
Exhaust Emission Test means the curb idle test.

Related to Exhaust Emission Test

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Coverage Tests The Overcollateralization Ratio Test and the Interest Coverage Test, each as applied to each specified Class or Classes of Secured Debt.

  • Guarantee Test(s means the test(s) specified in the Procuring Entity's Requirements to be carried out to ascertain whether the Facilities or a specified part thereof is able to attain the Functional Guarantees specified in the Appendix to the Contract Agreement titled Functional Guarantees, in accordance with the provisions of GCC Sub-Clause25.2 (Guarantee Test) hereof.

  • Stand-Alone Test Environment or "SATE" shall have the meaning set forth in Section 12.2.9.3.2.

  • Class C Coverage Tests means the Class C Interest Coverage Test and the Class C Par Value Test.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Interest Coverage Test means the Class A/B Interest Coverage Test, the Class C Interest Coverage Test, the Class D Interest Coverage Test and the Class E Interest Coverage Test.

  • Class D Coverage Tests means the Class D Interest Coverage Test and the Class D Par Value Test.

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Asset Coverage Test is met if the Adjusted Aggregate Asset Amount (as defined below) shall be in an amount at least equal to the Canadian Dollar Equivalent of the aggregate Principal Amount Outstanding of the Covered Bonds as calculated on the relevant Calculation Date. For greater certainty, references in this Schedule to “immediately preceding Calculation Date” and “previous Calculation Date” are to the Calculation Period ending on the Calculation Date.

  • Performance and Guarantee Test means all operational checks and tests required to determine and demonstrate capacity, efficiency and operating characteristics as specified in the Contract Documents.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Class C Interest Coverage Test means the test which will apply as of any Measurement Date occurring on and after the Determination Date immediately preceding the second Payment Date and which will be satisfied on such Measurement Date if the Class C Interest Coverage Ratio is at least equal to 110.0 per cent.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Confirmation test means a drug or alcohol test on a sample to substantiate the results of a prior drug or alcohol test on the same sample and which uses different chemical principles and is of equal or greater accuracy than the prior drug or alcohol test;

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Performance and Guarantee Tests , shall mean all operational checks and tests required to determine and demonstrate capacity, efficiency, and operating characteristics as specified in the Contract Documents.

  • Collateral Quality Test means a test that is satisfied if, as of any date of determination, in the aggregate, the Collateral Loans owned (or in relation to a proposed acquisition of a Collateral Loan, both owned and proposed to be owned) by the Borrower satisfy each of the tests set forth below, calculated in each case in accordance with Section 1.3:

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Class A/B Coverage Tests means the Class A/B Interest Coverage Test and the Class A/B Par Value Test.

  • Class A/B Interest Coverage Test means the test which will apply as of any Measurement Date occurring on and after the Determination Date immediately preceding the second Payment Date and which will be satisfied on such Measurement Date if the Class A/B Interest Coverage Ratio is at least equal to 120.0 per cent.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.