ASM test definition

ASM test means an Acceleration Simulation Mode 2525/5015 exhaust emission test as defined in the I/M Test Manual. This test shall be conducted using a chassis dynamometer. The test procedure to be performed by certified inspectors shall be as defined in the I/M Inspection Procedures Manual.
Sample 1Sample 2Sample 3
ASM test means an Acceleration Simulation Mode 2525/5015 exhaust emission test (ASM test)”as defined in the I/M Test Manual. This test shall be conducted using a chassis dynamometer. The test procedure to be performed by certified inspectors shall be as specified in the Emissions Inspector Certification Training Program Manual. ASM 2525 means the vehicle under test is run under a 25% engine load at 25 miles per hour. ASM 5015 means the vehicle under test is run under a 50% engine load at 15 miles per hour.
Sample 1Sample 2

Examples of ASM test in a sentence

  • The emission standards in the I/M program for the ASM-2 test are EPA’s start-up cutpoints for the two mode 25/25-50/15 ASM test.

  • No. 2005-3)AMENDED - JANUARY 25, 2007h rh t 3t4 4 55 5 31st PL SW5(Ord.

  • The vehicle must have an ASM test at an approved Smog Check facility.

  • The air intakes on the ASM test sGeorgia Analyzer System and the vehicle being inspected shall at all times during the inspection be exposed to the same ambient temperature, pressure and humidity conditions.

  • The ASM test uses tailpipe emissions sensing equipment that measures emissions as the vehicle is driven under load at a steady speed on a chassis dynamometer.

  • Pursuant to the Plan, the Holding Company is offering a minimum of 1,700,000 shares and a maximum of 2,300,000 shares of common stock, par value $0.01 per share (the “Common Stock”) (subject to an increase up to 2,645,000 shares) (the “Offer Shares”), in the Subscription Offering, and, if necessary, (i) the Community Offering and/or (ii) the Syndicated Community Offering (collectively, the “Offering”).

  • Whichever test methodologies or equipment the Contractor selects, the test methodologies and equipment must meet U.S. EPA ASM test procedures, standards, and equipment specifications as set forth in the technical guidance put out by U.S. EPA in July 2004.

  • Counties under the “enhanced” program regime (discussed below) use the Accelerated Simulation Mode (ASM) test, which uses a dynamometer or rolling road to simulate on-road conditions.

  • An exhaust emission test, when conducted, will now use the TSI test instead of the ASM test to determine the amount of specified gases in a vehicle’s exhaust.

  • At a minimum, the response plan must address the following: • Provide a description of equipment on site available to contain and/or respond to an emergency/spill of the material.• Notification procedures.• Response coordination procedures between Contractor and the City.• Provide a Site Plan showing the location of stored hazardous materials and location of spill containment/response equipment.• Provide a description of the training provided to the Contractor employees.

Related to ASM test

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Asset Test means, for an Asset Review, each Test, as defined in the Asset Representations Review Agreement, in Schedule A to the Asset Representations Review Agreement to be performed by the Asset Representations Reviewer on the related Asset Review Receivables.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Genetic test means an analysis of human DNA, RNA, chromosomes, proteins, or metabolites, that detect genotypes, mutations, or chromosomal changes. The term “genetic test” does not mean an analysis of proteins or metabolites that does not detect genotypes, mutations, or chromosomal changes; or an analysis of proteins or metabolites that is directly related to a manifested disease, disorder, or pathological condition that could reasonably be detected by a health care professional with appropriate training and expertise in the field of medicine involved.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Coverage Tests The Overcollateralization Ratio Test and the Interest Coverage Test, each as applied to each specified Class or Classes of Secured Debt.

  • Cannabis testing facility means an entity registered by