Field standard definition

Field standard means a physical standard that meets specifications and tolerances in the National Institute of Standards and Technology Handbook 105-series standards, is traceable to the reference or working standards through comparisons or using acceptable laboratory procedures as adopted by the National Conference on Weights and Measures and published in the United States Department of Commerce National Institute of Standards and Technology Handbook 143, "State Weights and Measures Laboratories Program Handbook," and is used in conjunction with commercial weighing and measuring equipment. All field standards may be defined by rule and regulation and shall be verified upon their initial receipt and as often thereafter as deemed necessary by the director;
Sample 1Sample 2Sample 3
Field standard means the physical standards which are traceable to the reference standards through comparisons, using acceptable laboratory procedures, and used in the enforcement of weights and measures laws and rules;
Sample 1Sample 2Sample 3
Field standard means a physical standard that meets specifications and tolerances in the National Institute of Standards and Technology Handbook 105-series standards, is traceable to the reference or working standards through
Sample 1

Examples of Field standard in a sentence

  • Field standard for competence Learning disabilities nurses must promote the individuality, independence, rights, choice and social inclusion of people with learning disabilities and highlight their strengths and abilities at all times while encouraging others do the same.

  • A summary of the QA/QC submission rates is included in Table 4.3. Table 4.3: Field standard and duplicate QA/QC summary for the Atlantic Seaboard HM Deposits.

  • Field standard for competence Mental health nurses must contribute to the leadership, management and design of mental health services.

  • Cubical coefficient of thermal expansion: Three dimensional expansion or contraction of a material due to temperature change, expressed °C-1 or °F-1 Field standard test measure: A measure that can be hand held and is usually less than 40 Liters (10 Gallons).

  • Field standard volumetric standards shall be equipped with a gauge tube mounted on the side of the neck to clearly indicate the level of fluid in the standard.

  • Schedule 3 of the Local Plan states that all developments over 350 houses are required to incorporate open space to meet the National Playing Field standard of 2-43 hectare per 1,000 people.

  • APPENDIX 2.1: CHAPTER 2 TABLES AND FIGURES CP23 Fieldn = 7 Native VegetationExample Wetland andCP1 Field (standard) n = 5 Introduced Vegetation (70% area)NativeCP1 Field (native planting failed) Introduced Vegetationn = 2 25 m WetlandBufferVegetation (30% area) Fig.

  • Field standard results are closely monitored and actions are underway to mitigate issues.Verification of sampling and assayingSignificant intersections have been visually verified by Fortescue's Exploration and Resource Geology Group Managers.Twin hole analysis has not been completed.Sample data is stored using a customized acQuire database, which includes a series of automated electronic validation checks.

  • IFAD’s primary focus on capacity strengthening through community-based organizations was also acknowledged.

  • Central to this position is the claim that it is the capacity for self-consciousness and self-valu- ing that gives humans their unique status as moral agents.

Related to Field standard

  • Reliability Standard means a requirement to provide for Reliable Operation of the Bulk Power System, including without limiting the foregoing, requirements for the operation of existing Bulk Power System Facilities, including cyber security protection, and including the design of planned additions or modifications to such Facilities to the extent necessary for Reliable Operation of the Bulk Power System, but the term does not include any requirement to enlarge Bulk Power System Facilities or to construct new transmission capacity or generation capacity. A Reliability Standard shall not be effective in the United States until approved by the Federal Energy Regulatory Commission and shall not be effective in other jurisdictions until made or allowed to become effective by the Applicable Governmental Authority. See Appendix 2 to the NERC Rules of Procedure, Definitions Used in the Rules of Procedure.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Energy efficiency portfolio standard means a requirement to

  • safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;

  • Renewable Energy Standard means the minimum renewable energy capacity portfolio, if applicable, and the renewable energy credit portfolio required to be achieved under section 28 or former section 27.

  • harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Categorical pretreatment standard or "categorical standard" means any regulation containing pollutant discharge limits promulgated by the environmental protection agency in accordance with sections 307(b) and (c) of the Act (33 U.S.C. section 1317) that apply to a specific category of users and that appear in 40 CFR chapter I, subchapter N, parts 405 through 471.

  • Renewable Portfolio Standard or “RPS” means a state or federal law, rule or regulation that requires a stated amount or minimum proportion or quantity of electricity that is sold or used by specified persons to be generated from Renewable Energy Sources.

  • Standard operating procedure means a formal written procedure offi- cially adopted by the plant owner or operator and available on a routine basis to those persons responsible for carrying out the procedure.

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Good Utility Practice means any of the practices, methods and acts engaged in or approved by a significant portion of the electric utility industry during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety and expedition. Good Utility Practice is not intended to be limited to the optimum practice, method, or act to the exclusion of all others, but rather is intended to include acceptable practices, methods, or acts generally accepted in the region; including those practices required by Federal Power Act Section 215(a)(4).

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Regulatory Floodway means the channel of a river or other watercourse and the adjacent land areas that must be reserved in order to discharge the base flood without cumulatively increasing the water surface elevation more than a designated height.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Regulatory Requirement means any law, regulation or court order, or any rule, direction, guideline, code, notice or restriction (whether or not having the force of law) issued by any regulatory authority, governmental agency (including tax authority), clearing or settlement bank or exchange, or industry or self-regulatory body, whether in or outside Hong Kong, to which HKICL, we or any other Participant or the respective affiliates or group companies, or you are subject or are expected to comply with from time to time.