First Division definition

First Division means “60% and above”
Sample 1Sample 2Sample 3
First Division. SECOND DIVISION THIRD DIVISION -------------------------------------------------------------------------------------------------- 1 Walls and columns m/2/ 1 Terrazzo 2 Floors m/2/ 2 Mosaic 3 Ceilings including sides and 3 Ceramic soffits of attached beams m/2/ 4 Vitrified Ceramic 4 Stairs and steps m/2/ 5 Quarry 5 Skirtings, xxxxx, channels, wall 6 Reconstituted granite strings, open strings, curb 7 Granolithic strings, cornices and the like m 6 Nosings m 7 Round edge tiles, coves, beads, m mouldings and the like 8 Sundries 1 Non-slip inserts m AK/3 July 1998 ABWF Standard Method of Measurement CLASS AK (see rules at head of class on page AK/2) MEASUREMENT RULES DEFINITION RULES COVERAGE RULES ADDITIONAL DESCRIPTION RULES ------------------------------------------------------------------------------------------------------------------------------------ M4 Where the finishes on D1 Treads and risers, C3 Items for floors shall be deemed A6 Work to ceilings including sides and soffits of attached landings, aprons, ends, to include forming channels in work sides and soffits of attached beams are the same as on the edges of steps, returns and of a similar type. beams where-the ceilings and walls built up to the the like shall be classed as beams (the higher in the case of underside of those beams the stairs and steps. attached beams) exceeds 3.5m beam finishes shall be C4 Items for skirtings, xxxxx, from finished floor level shall measured with the wall channels, wall strings, open be given separately and so finishes. strings, curb strings, cornices and described, the height being the like and round edge tiles, stated in stages of 1.5m. M5 The heights of tile coves, beads, mouldings and the like Cornices and similar items which skirtings shall be based on shall be deemed to include occur in work to ceilings tile sizes and not the angles, mitres, stops, including sides and dimension between the intersections, fair ends, soffits of attached beams shall finished floor surface and the junctions, wreathed corners and the not be distinguished by height top of the tile. like including special from finished floor level. tiles or fittings for same. M6 Channels not formed in work of a similar type shall be C5 Items for mosaic floor tiles A7 Skirtings, xxxxx, channels, measured. shall be deemed to include for wall strings, open strings, curb setting the edge tiles at junctions strings, cornices and the like M7 Areas measured for work between floors and walls at an angle sh...
Sample 1
First Division means the Primera División of the Mexican Soccer League.
Sample 1Sample 2Sample 3

Examples of First Division in a sentence

  • Examples of First Division vehicles include cars, station wagons, mini-vans (10 passengers or less which includes the driver), taxi cabs, medical carrier or medi-car, and Suburbans.

  • INTERPOL-UN Security Council Special Notice web link: https://www.interpol.int/en/notice/search/ un/5269021 Additional information from the narrative summary of reasons for listing provided by the Sanctions Committee: Pacifique Ntawunguka was the commander of the First Division of FOCA, the armed wing of the FDLR.

  • Were the Club/SAD to be promoted to the First Division and any non-applied balance of the Increase deducted, they would still permanently lose the option of doing so.

  • Bands of marks for use in final degree classification in undergraduate modular programmes are as follows: All FacultiesFirst Class Honours 70 and above Second Class Honours, First Division 60-69Second Class Honours, Second Division 50-59Third Class Honours 40-49Fail 39 and belowAn Ordinary degree can be awarded if a student has successfully completed at least 300 credits with a minimum of 60 credits at level 6.

  • Spring Season: Any Club with 3 or more teams in an Age Group should place at least one team in either the First Division or Second Division, based on their record from the previous Fall Season.

  • When travel involves more than one carrier, it is the responsibility of the person to verify the policy of each carrier involved in the itinerary and ensure that the requirements of each carrier have been met and that each carrier is aware of and has agreed to carry the service animal on its own aircraft.

  • For the First Division, 14 marks will be awarded and for Second Division, 10 marks will be awarded.

  • Hence, it is clear that pharmaceutical prospecting could generate revenues, significantly more (1.3 times) than_____________________________tea cultivation even on a time span of 100 years.

  • The Players who are expected to sign up for Season T on the Club/SAD's teams' squads participating in the LaLiga First Division or Second Division A Competition.

  • A candidate registering for MPhil/PhD shall hold a Bachelor with Honours with at least a Second Class in the First Division or a Master degree.


More Definitions of First Division

First Division. SECOND DIVISION THIRD DIVISION ----------------------------------------------------------------------------------------- 1 Roof tiling 1 Precast concrete tiles 1 Upper surfaces inclined 2 Plain tiles at an angle not 3 Interlocking tiles exceeding 30 DEG. to the 4 Chinese tiles horizontal m/2/ 2 Upper surfaces inclined at 30 DEG. - 60 DEG. to the horizontal m/2/ 3 Surfaces inclined at an angle exceeding 60 DEG. to the horizontal m/2/ 4 Curved surfaces m/2/ 5 Domed surfaces m/2/ 6 Surfaces of width not exceeding 300mm m 7 Surfaces of width 300mm - 1m m 2 Roof tiling ancillaries 1 Hips m 2 Valleys m 3 Ridges m 4 Verges m 5 Xxxxx courses m 6 Ornamental tiles nr ABWF Standard Method of Measurement CLASS AA ADDITIONAL DESCRIPTION MEASUREMENT RULES DEFINITION RULES COVERAGE RULES RULES ----------------------------------------------------------------------------------------------------------------------------------- M1 The areas measured C1 Items for work in this class A1 Where the colour of roof shall be those of the shall be deemed to include: tiling and roof cladding surfaces covered. No specified is not within the deduction from the areas a) preparation of manufacturer's standard measured shall be made for background, overlaps, colour ranges in accordance holes and openings each not joints, mitres, angles, with BS or RAL or DIN exceeding 0.5m/2/ in area. seams, rolls, fillets and international colour standards the like. the item descriptions shall so state and also identify the b) laying to falls or colour. cambers.
Sample 1
First Division. SECOND DIVISION THIRD DIVISION ------------------------------------------------------------------------------------------ 1 Non-fire rated doors and frames nr 1 Stainless steel 2 Half hour fire rated doors and 2 Galvanised steel with paint frames nr finish 3 One hour fire rated doors and 3 Mild steel with paint finish frames nr 4 Two hours fire rated doors and frames nr 5 Four hours fire rated doors and frames nr AE/1 July 1998 ABWF Standard Method of Measurement CLASS AE ADDITIONAL DESCRIPTION MEASUREMENT RULES DEFINITION RULES COVERAGE RULES RULES ------------------------------------------------------------------------------------------------------------------------------- M1 Item descriptions for items D1 The expression' with paint C1 Items for work excluding A1 Item descriptions shall excluding supply and delivery finish' shall mean factory supply and delivery shall be identify doors and frames and shall include features from applied paint finish. deemed to include: all associated items by First Division only. stating the door type a) taking delivery from the numbers given in the Supplier at an agreed Specification and Drawings. point on the Site. A2 Item descriptions for air b) taking delivery from the tight doors and frames shall Supplier in batches in so state. accordance with the Delivery Programme.
Sample 1

Related to First Division

  • Sub-Division means a sub-division of a district;

  • Antitrust Division has the meaning set forth in the Section 6.4(a).

  • LLC Division means the statutory division of any limited liability company into two or more limited liability companies pursuant to Section 18.217 of the Delaware Limited Liability Company Act or a comparable provision of a different jurisdiction’s laws, as applicable.

  • Department of Justice means the Antitrust Division of the United States Department of Justice.

  • Public university means a public university described in section 4, 5, or 6 of article VIII of the state constitution of 1963.

  • Delaware LLC Division means the statutory division of any Delaware LLC into two or more Delaware LLCs pursuant to Section 18-217 of the Delaware Limited Liability Company Act.

  • Finance commission means the Finance Commission of Texas.

  • Virginia Stormwater Management Program authority or "VSMP authority" means an authority approved by the State Board after September 13, 2011, to operate a Virginia Stormwater Management Program.

  • EMEA means the European Agency for the Evaluation of Medicinal Products, or any successor agency thereto.

  • regional council means a regional council established under section 2 of the Regional Councils Act, 1992 (Act 22 of 1992);

  • Physical Therapy Compact Commission or "commission" means the national administrative body whose membership consists of all states that have enacted the compact.

  • Diocesan Schools Commission means the education service provided by the diocese, which may also be known, or referred to, as the Diocesan Education Service.

  • School District/Public Entity means the School District/Public Entity that executes the contract.

  • OCC means the Office of the Comptroller of the Currency.

  • Health and Human Services Commission or “HHSC” means the administrative agency established under Chapter 531, Texas Government Code, or its designee.

  • Central Commission means the Central Electricity Regulatory Commission referred to in sub-section (1) of section 76 of the Act;

  • U.S. Department of Energy means the Department of Energy established by Public Law 95-91, August 4, 1977, 91 Stat. 565, 42 U.S.C. 7101 et seq., to the extent that the department exercises functions formerly vested in the U.S. Atomic Energy Commission, its chairman, members, officers and components and transferred to the U.S. Energy Research and Development Administration and to the administrator thereof pursuant to Sections 104(b), (c) and (d) of the Energy Reorganization Act of 1974 (Public Law 93-438, October 11, 1974, 88 Stat. 1233 at 1237, effective January 19, 1975) and retransferred to the Secretary of Energy pursuant to Section 301(a) of the Department of Energy Organization Act (Public Law 95-91, August 4, 1977, 91 Stat. 565 at 577-578, 42 U.S.C. 7151,

  • School District/Public Entity means the School District/Public Entity that executes the contract.

  • Public utilities means those utilities defined in sections 4905.02, 4905.03, 4907.02, and 4907.03 of the Revised Code; in the case of a foreign corporation, it means those utilities defined as public utilities by the laws of its domicile; and in the case of any other foreign issuer, it means those utilities defined as public utilities by the laws of the situs of its principal place of business. The term always includes railroads whether or not they are so defined as public utilities.

  • School district means a public school district.

  • Pharmacist services means products, goods, and services, or any combination of products, goods, and services, provided as a part of the practice of pharmacy.

  • Tribal Council means the governing body of the Band established pursuant to Article X of the Constitution.

  • metropolitan municipality means a municipality that has exclusive executive and legislative authority in its area, and which is described in section 155 (1) of the Constitution as a category A municipality;

  • Redevelopment Commission means the Fishers Redevelopment Commission.

  • Small school district means a school district that meets all

  • Development District means Municipal Development District No. 4 in the City, which is described in the corresponding Development Program.