Functional check definition

Functional check for an output component means verification of proper response to a computer command. For an input component, functional check means verification of the input signal being in the range of normal operation, including evaluation of the signal's rationality in comparison to all available information.
Sample 1Sample 2Sample 3
Functional check flight” (FCF) means flying that involves the planned use of abnormal 4 or “special” checklists and/or determinations of the airworthiness of major system items 5 or troubleshooting. 6 13. “Line check pilot” (LCP) means a pilot who is: 7 a. selected by the Company and designated by the FAA, and 8 b. authorized to administer evaluations during line operations. 9 14. “Non-seniority list instructor” (NSLI) means an instructor who is: 10 a. not on the seniority list, or 11 b. currently receiving long term disability benefits under the D&S Plan (including the 12 NWA LTD Plan).
Sample 1

Examples of Functional check in a sentence

  • Functional check requirements for specific instruments are documented in procedures or as instructions on forms or logs.

  • Unless otherwise stipulated in the Agreement, the preventive maintenance shall include:- Checking the condition of the Equipment,- Functional check- Adjustments- Provisions and replacement of wear parts- Cleaning and necessary lubrication2.

  • Functional check (F/C) A 'functional check' is a detailed examination of a complete system, sub-system or component to determine if operating parameters are within limits of range of movement, rate of flow, temperature, pressure, revolutions per minute, degrees of travel, etc., as specified in the appropriate maintenance manual.

  • Principal By: FEDERAL INSURANCE COMPANY By: EXHIBIT E PERFORMANCE TESTSEXHIBIT E PERFORMANCE TESTS Electrical Losses Tests Bushing power factor and capacitance Core megger (Core form designs only) CT ratio and polarity Transformer turns ratio at all taps Insulation power factor Insulation resistance Functional check of unit control cabinet Oil tests at receipt from refinery and after filling a.

  • During the Operational/ Functional check period, if radar remains unserviceable for more than 5 days at a time due to the shipment of any parts, Operational/ Functional check period will stop and fresh Functional/ Operational check will be started.

  • Functional check flights are not required.• Cannibalization, taking parts off one aircraft to install in another is not an option.• All aircraft enter service at the same time.• All flights scheduled for 2.75 hours.

  • Functional check has to be repeated every month by a competent person.

  • This First Supplemental Indenture is supplemental to, and is entered into in accordance with Section 8.01 of, the Indenture, and except as modified, amended and supplemented by this First Supplemental Indenture, the provisions of the Indenture are in all respects ratified and confirmed and shall remain in full force and effect.

  • Circuit No. /Designation of Other Protective Devices Results of hand operation Remarks Functional check of all items of equipment such as isolators, switches and indicative devices Circuit No. /Designation of Other Protective Devices Results of hand operation Remarks Tested / Checked by :(Name of *EE / (Note 1) Contractor’s Representative)Signature - ( )Post : Tel.

  • Annual inspection:• Tightness of the glass door seal.• Permeability of the pressure compensation opening with insert.• Functional check of the operating panel and of the device control.• Electrical safety check in accordance with the relevant national regula- tions (e.g. VBG 4).

Related to Functional check

  • Functional Criteria means the criteria set out in clause 27 of this Part C.

  • User seal check or "fit check" means an action conducted by the respirator user to determine if the respirator is properly seated to the face. Examples include negative pressure check, positive pressure check, irritant smoke check, or isoamyl acetate check.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Gestational carrier means an adult woman who enters into an agreement to have an embryo implanted in her and bear the resulting child for intended parents, where the embryo is conceived by using the egg and sperm of the intended parents.

  • E-Check means any check which You authorize the payee to process electronically. For joint accounts, read singular pronouns in the plural.

  • Essential job functions means the fundamental job duties of the employment position an individual holds. A job function may be considered essential if-

  • Certified operator means the solid waste facility operator or an employee of such operator who is present at the facility and oversees or carries out the daily operations authorized through this Permit, and whose qualifications are currently certified in accordance with Section 22a-209-6 of the RCSA.

  • Certified check means a check accepted by the bank on which it is drawn. Acceptance may be made as stated in subsection (1) or by a writing on the check which indicates that the check is certified. The drawee of a check has no obligation to certify the check, and refusal to certify is not dishonor of the check.

  • Certified applicator means any individual who is certified under this chapter as authorized to use any pesticide.

  • Fédération means Fédération des caisses Desjardins du Québec.

  • Self-Check means an integrated function that checks for a system failure on a continuous basis at least while the system is active.

  • Certified local government means a historic preservation program established by county or municipal ordinance that is certified by the Secretary of the Interior pursuant to 36 CFR Part 61, the implementing regulations for the National Historic Preservation Act of 1966, as amended.

  • Baggage Check means those portions of the Ticket which relate to the carriage of your Checked Baggage.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • technical service means an organisation or body designated by the approval authority of a Member State as a testing laboratory to carry out tests, or as a conformity assessment body to carry out the initial assessment and other tests or inspections, on behalf of the approval authority, it being possible for the approval authority itself to carry out those functions;

  • Maintenance Supervisor (Tradesperson) means an employee who has trade qualifications and has overall responsibility for maintenance at the place of employment and may be required to supervise other maintenance staff.

  • Functionally Dependent Facility means a facility which cannot be used for its intended purpose unless it is located in close proximity to water, limited to a docking or port facility necessary for the loading and unloading of cargo or passengers, shipbuilding, or ship repair. The term does not include long-term storage, manufacture, sales, or service facilities.

  • Background Check means the process of checking an applicant’s arrest and conviction record, through any means.

  • Distribution Function means the functions with regard to:

  • Police Check means a formal inquiry made to the relevant police authority in each State or Territory and designed to obtain details of an individual’s criminal conviction or a finding of guilt in all places (within and outside Australia) that the Grantee knows the person has resided in;

  • Functionally dependent use means a use which cannot perform its intended purpose unless it is located or carried out in close proximity to water. The term includes only docking facilities, port facilities that are necessary for the loading and unloading of cargo or passengers, and ship building and ship repair facilities, but does not include long-term storage or related manufacturing facilities.

  • Safety-sensitive function means all time from the time a driver begins to work or is required to be in readiness to work until the time he/she is relieved from work and all responsibility for performing work.

  • Certified automated system means computer software certified under the agreement to calculate the tax imposed by each jurisdiction on a transaction, determine the amount of tax to remit to the appropriate state, and maintain a record of the transaction.

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • Essential functions means the fundamental job duties of the employment position the individual with a disability holds or desires. “Essential functions” does not include the marginal functions of the position.

  • Application Review Start Date means the later date of either the date on which the District issues its written notice that the Applicant has submitted a completed Application or the date on which the Comptroller issues its written notice that the Applicant has submitted a completed Application and as further identified in Section 2.3.A of this Agreement.