Hot Tap definition

Hot Tap means a hole cut into Regional’s active utility main.
Hot Tap means drilling into a pipe that is live (currently providing water) as a means of temporarily providing water, so service is not interrupted when connecting new lines to existing lines.
Hot Tap means a process of penetrating through the pressure-containing barrier of a pipeline, line, piping system, tank, vessel, pump casing, compressor casing or similar facility that has not been totally isolated, depressurized, purged and cleaned;

Examples of Hot Tap in a sentence

  • The Hot Tap Connection fee paid by each future User shall be in accordance with the rate schedule adopted by the District.

  • The Contractor shall submit a completed Hot Tap Permit to the Engineer for review and approval.

  • CMU Resolution on Approval of the Rules for Provision of District Heating, Cold and Hot Tap Water Supply and Sewerage Services, and a Model Contract for Provision of District Heating, Cold and Hot Tap Water Supply and Sewerage Services (No.630 of 21.07.2005); b.

  • Details of the health and safety implications are provided in the following documents: • Wigan site Health and Safety aspects review for Hot Tap installation of Emission Control – May 2016• In production “Hot Tap” installation of Emission Control Risk review – 29 April 2016 A time-limited derogation would still be required until the end of 2017.

  • Fully open the Cold Mains Stopcock and fill Cylinder until water appears at the Hot Tap.

  • The Hot Tap water boiler can be switched on in the Lansdown Restaurant, as can the automatic hot beverage machine.

  • Close the Hot Tap and attend each hot water outlet in turn and ensure water flow is obtained at each.

  • The inspector shall use as a minimum the “Suggested Hot Tap Checklist” contained in API Publication 2201 for hot tapping performed on piping components.

  • A Hot Tap refers to any penetration into live piping or a pipeline where there is no existing fitting or when welding on pressurized pipeline or a pipeline.

  • Contractor shall construct One numbers of Hot Tap tie-ins on existing MOL pipelines through PDO Approved Hot Tap Contractor as per the relevant approved drawings.


More Definitions of Hot Tap

Hot Tap means a procedure used in the repair, maintenance, and service activities that involves welding on a piece of equipment (pipelines, vessels, or tanks) under pressure, in order to install connections or appurtenances.

Related to Hot Tap

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Direction-indicator lamp means the lamp used to indicate to other road-users that the driver intends to change direction to the right or to the left;

  • Pilot program means the pilot program identified and funded through the Funding Agreement and described in that Funding Agreement and its attachments.

  • E-Verify Program above means the employment verification program administered by the United States Department of Homeland Security, the Social Security Administration, or any successor program.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • System Impact Study means an assessment by the Transmission Provider of (i) the adequacy of the Transmission System to accommodate a Completed Application, an Interconnection Request or an Upgrade Request, (ii) whether any additional costs may be incurred in order to provide such transmission service or to accommodate an Interconnection Request, and (iii) with respect to an Interconnection Request, an estimated date that an Interconnection Customer’s Customer Facility can be interconnected with the Transmission System and an estimate of the Interconnection Customer’s cost responsibility for the interconnection; and (iv) with respect to an Upgrade Request, the estimated cost of the requested system upgrades or expansion, or of the cost of the system upgrades or expansion, necessary to provide the requested incremental rights. “System Protection Facilities” shall refer to the equipment required to protect (i) the Transmission System, other delivery systems and/or other generating systems connected to the Transmission System from faults or other electrical disturbance occurring at or on the Customer Facility, and (ii) the Customer Facility from faults or other electrical system disturbance occurring on the Transmission System or on other delivery systems and/or other generating systems to which the Transmission System is directly or indirectly connected. System Protection Facilities shall include such protective and regulating devices as are identified in the Applicable Technical Requirements and Standards or that are required by Applicable Laws and Regulations or other Applicable Standards, or as are otherwise necessary to protect personnel and equipment and to minimize deleterious effects to the Transmission System arising from the Customer Facility.

  • Municipal Separate Storm Sewer System Management Program means a management program covering the duration of a state permit for a municipal separate storm sewer system that includes a comprehensive planning process that involves public participation and intergovernmental coordination, to reduce the discharge of pollutants to the maximum extent practicable, to protect water quality, and to satisfy the appropriate water quality requirements of the CWA and regulations, and this article and its attendant regulations, using management practices, control techniques, and system, design, and engineering methods, and such other provisions that are appropriate.

  • Program Plan means the tobacco settlement program plan dated February 14, 2001, including exhibits to the program plan, submitted by the authority to the legislative council and the executive council, to provide the state with a secure and stable source of funding for the purposes designated by section 12E.3A and other provisions of this chapter.

  • Clinical review criteria means the written screening procedures, decision abstracts, clinical protocols, and practice guidelines used by a health carrier to determine the necessity and appropriateness of health care services.

  • Spot network means a type of electric distribution system that uses two or more inter-tied transformers to supply an electrical network circuit. A spot network is generally used to supply power to a single customer or a small group of customers. Spot network has the same meaning as the term "spot network" defined in Section 4.1.4 of IEEE Standard 1547.

  • flight plan means specified information provided to air traffic services units, relative to an intended flight or portion of a flight of an aircraft;

  • ODJFS means the Ohio Department of Job and Family Services.

  • Weapon-free school zone means school property and a vehicle used by a school to transport students to or from school property.

  • SAP Training Catalogue means the catalogue published by SAP containing details of SAP training courses and services.

  • Product Group or “the Group” means a group of lotteries that has joined together to offer a product pursuant to the terms of the Multi-State Lottery Agreement and the Product Group’s own rules.

  • Basic health plan model plan means a health plan as required in RCW 70.47.060(2)(e).

  • Peer support specialist means an individual who has experienced a severe and persistent mental illness and who has successfully completed standardized training to provide peer support services through the medical assistance program or the Iowa Behavioral Health Care Plan.

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Gross laden weight means the actual weight of a vehicle or combination of

  • Package means the packaging together with its radioactive contents as presented for transport.

  • Approved abuse education training program means a training program using a curriculum approved by the abuse education review panel of the department of public health or a training program offered by a hospital, a professional organization for physicians, or the department of human services, the department of education, an area education agency, a school district, the Iowa law enforcement academy, an Iowa college or university, or a similar state agency.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Progressive discipline means a process of applying and documenting disciplinary actions progressing from less to more serious depending on the employee’s history and the nature of the offense.

  • Host Customer means a customer under a Customer Agreement.