Hydraulic Capacity definition

Hydraulic Capacity means the ability of a channel, flood hazard area or structure to conduct water. Hydraulic capacity is a function of cross-sectional area, hydraulic friction, shape, skew, slope and the presence or absence of obstructions.
Hydraulic Capacity means the maximum volume of water that can physically flow
Hydraulic Capacity means the maximum volume of water that can physically flow through the WTP without overflows, spillage, or damage to the WTP.

Examples of Hydraulic Capacity in a sentence

  • Hydraulic Capacity - Overall, the hydraulic profile shall be maintained as large as possible.

  • This layer works by merging features and patterns semanti- cally into a solitary feature map.

  • Hydraulic Capacity - Overall, the hydraulic capacity shall be maintained as large as possible.

  • Hydraulic Capacity - Overall, the hydraulic cross-section shall be maintained as large as possible.

  • Hydraulic Capacity and Efficiency check of Primary and local UGRs and estimation of required capacities of the clear water UGR and Pumping Stations, possibility of reducing number of local UGRs and Booster Pumping stations and planning of necessary Flow Meters and Pressure Loggers to be installed for continuous monitoring of flows and pressures at UGRs and Pumping Stations.

  • West Minimum Instantaneous Flow (kcfs) Dec–Feb: 0 kcfs \ Mar–Nov: 11.5 kcfs Forebay Normal Operating Range (ft) 537’ – 540’ Tailrace Rate of Change Limit (ft/hr) 1.5’/hr Powerhouse Length (ft) 656’ Powerhouse Hydraulic Capacity (kcfs) 130 kcfs Turbine Units (#) 6 (Units 1-3 BLH Kaplan; Units 4-6 Allis Chalmers Kaplan) Turbine Unit Generating Capacity (MW) Rated: 810 MW (Units 1-6 @135 MW).

  • Maximum: 930 MW (Units 1-6 @155 MW) Gatewell Orifice Diameter 12” Spillway Length (ft) 498’ Spillway Hydraulic Capacity (kcfs) 850 kcfs Spillbays (#) 8 Spillway Weirs (#) 1 Removable Spillway Weir (RSW) in Bay 8 Navigation Lock Length x Width (ft) 650’ x 84’ (Usable Space) Navigation Lock Max.

  • The Owner has a plan and process to forecast and track Uncommitted Reserve Hydraulic Capacity and verify the proposed Alteration of the system can be accommodated.

  • It is required that CIPP samples with and without plastic coating meet these chemical-testing requirements.B. Hydraulic Capacity - Overall, the hydraulic cross-section shall be maintained as large as possible.

  • Hydraulic Capacity - Overall, the Hydraulic profile shall be maintained as large as possible.

Related to Hydraulic Capacity

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Excess Capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • Generation Capacity Resource shall have the meaning specified in the Reliability Assurance Agreement. Generation Interconnection Customer:

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;