Idle RPM definition

Idle RPM means for vehicles equipped with a manual transmission, the manufacturer’s recommended engine speed with the transmission in neutral or with the clutch disengaged. For vehicles equipped with an automatic transmission, idle revolutions per minute (RPM) means the manufacturer’s recommended engine speed with the transmission in neutral or park.

Examples of Idle RPM in a sentence

  • Idle RPM should automatically return to normal when the brake is released or transmission is put into gear.

  • IT IS RECOMMENDED THAT ALL WORK ON THE ENGINE BE DONE BY TRAINED AND QUALIFIED SERVICE PERSONNEL.During the warm up period, scan the gauges for correct operation of all the systems:• Oil pressure 35- 80 PSI (Approx.) at 2000 RPM• Cooling water flow and water temperature 140 -170 degrees• Cooling water temperature for fresh water systems: 170 - 210 Degrees• Volts should rise to around 13 - 14 volts or higher• Idle RPM (600 - 700) in gearCAUTION: Do not operate at high RPM’s in neutral.

  • Abatement of state management over the church – 1824-1862.A further influence on Ben Marais, seen possibly in his 1959 publication providing an overview of Christianity over the centuries, is in the history of The Dutch Reformed Churches in Natal, Free State and Transvaal of Gerdener (1934).

  • For all other hearings: Once the Courtroom Deputy has confirmed that a hearing is proceeding, you should register for the appropriate hearing time at the links below no sooner than 48 hours prior to the hearing.

  • The ClearCommand Control SyStem offerS an option of two engine IDLE RPM SettingS.• The normal Low Idle RPM iS the default Idle Setting.• A High Idle RPM may be Set electrically.The operator SelectS High or Low Idle by depreSSing and releaS- ing the tranSfer button at the Station-in-Command while in the Control Head lever iS in the Ahead detent.

  • Idle RPM above 65% (or below 60%) is a downing discrepancy.CAUTIONDo not introduce fuel before N1 reaches 12% or if N1 begins to decrease.

  • The other sections usually have the symbol nil.For NSPK, the standard attack requires that an instance of Bob’s role has par- ticipated in the interaction, this instance has finished its execution (by having the vertical bar at the end), and the intruder has learned the nonce, n(b,r), generated by this Bob’s instance.

  • Test Stage: Idle RPM (see standards for maximum).Units of test results: Concentration measurements: HC PPM, CO percent, CO2 percent, O2 percent.

Related to Idle RPM

  • Subject Company shall have the meaning set forth in Section 6.10(a).

  • Model 1 seller means a seller registered under the agreement that has selected a certified service provider as the seller's agent to perform all of the seller's sales and use tax functions for agreement sales and use taxes other than the seller's obligation under Section 59-12-124 to remit a tax on the seller's own purchases.

  • Project Company means Company incorporated by the bidder as per Indian Laws in accordance with Clause no 3.5.

  • Pre-Closing Straddle Period means the portion of the Straddle Period ending on the Closing Date.

  • Harvest lot means a specifically identified quantity of marijuana that is, cultivated utilizing the same growing practices and harvested within a 72 hour period at the same location and cured under uniform conditions.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Combined sewer system means a system for conveying both sanitary sewage and storm water runoff.

  • Corner lot means a lot situated at the intersection of and abutting upon two streets, or upon two parts of the same street, the adjacent sides of which street or streets (or, in the case of a curved corner, the tangents at the street extremities of the side lot lines) contain an angle of not more than one hundred and thirty-five (135) degrees. In the case of a curved corner, the corner of the building lot shall be that point on the street line nearest to the point of intersection of the said tangents.

  • Post-Closing Straddle Period means the portion of a Straddle Period beginning the day after the Closing Date.

  • Wasteload allocation or "wasteload" or "WLA" means the portion of a receiving surface water's loading or assimilative capacity allocated to one of its existing or future point sources of pollution. WLAs are a type of water quality-based effluent limitation.

  • Project Buyer means the City’s employee assigned to serve as the contact person for Bidders/Sellers responding to Invitations For Bid or completing contracts herein.

  • Signaling Transfer Point (“STP”) means a signaling point that performs message routing functions and provides information for the routing of messages between signaling points within or between CCIS networks. A STP transmits, receives and processes CCIS messages.

  • Model 2 seller means a seller registered under the agreement that:

  • Project Companies means all Group Project Companies and Non-Group Project Companies together, each being a “Project Company”.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Solar PV Project means the solar Photo Voltaic Power project that uses sunlight for direct conversion into electricity through Photo Voltaic technology.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Fossil fuel-fired means the combustion of fossil fuel or any derivative of fossil fuel, alone or in combination with any other fuel, independent of the percentage of fossil fuel consumed in any calendar year (expressed in mmBtu).

  • Cannabis processing facility means a person that:

  • Pre-Closing Tax Period means any Tax period ending on or before the Closing Date and that portion of any Straddle Period ending on the Closing Date.

  • Planned External Financed Generation Capacity Resource means a Planned External Generation Capacity Resource that, prior to August 7, 2015, has an effective agreement that is the equivalent of an Interconnection Service Agreement, has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close, and has secured at least 50 percent of the MWs of firm transmission service required to qualify such resource under the deliverability requirements of the Reliability Assurance Agreement.

  • Railroad rolling stock means locomotives, of whatever motive power, autocars, railroad cars of

  • Waste load allocation means (i) the water quality-based annual mass load of total nitrogen or

  • Distributed Generator means a person who owns or operates Distributed Generation;