Initial temperature definition

Initial temperature means the aver- age temperature of the contents of the coldest container to be processed at the time the thermal processing cycle be- gins, as determined after thorough stir- ring or shaking of the filled and sealed container.
Sample 1Sample 2Sample 3
Initial temperature means the temperature of the contents of the coldest container to be processed at the time the sterilizing cycle begins, as specified in the scheduled process.
Sample 1Sample 2Sample 3

Examples of Initial temperature in a sentence

  • Initial temperature of mixed fluid = 0L, final temperature = T h e n temperature of jacket around observation tube equals temperature of reacted fluid = Of.Average temperature gradient between jacket and the portion of observa-Downloaded from https://royalsocietypublishing.org/ on 17 May 2022Heat Effects inRapid Chemical Chan4g5es9 .tion tube in which reaction takes place = (0L' — 0L) approximately.

  • Carrier gas (helium) flow rate: 40 mL/min Temperature program: Initial temperature: 45 EC, hold for 3 min Program: 45 EC to 220 EC, at 8 EC/min Final temperature: 220 EC, hold for 15 min.

  • Carrier gas (helium) flow rate: 15 mL/min Temperature program: Initial temperature: 45 EC, hold for 4 min Program: 45 EC to 220 EC, at 12 EC/min Final temperature: 220 EC, hold for 3 min.

  • Minimum Initial temperature (IT) is the lowest initial temperature permitted in the scheduled process.

  • Carrier gas (helium) flow rate: 5-7 mL/min Makeup gas (helium) flow rate: 30 mL/min Injector temperature: 200 EC Detector temperature: 340 EC Temperature program: Initial temperature: 45 EC, hold for 1 min 1st Ramp: 45 EC to 100 EC at 5 EC/min 2nd Ramp: 100 EC to 275 EC, at 8 EC/min Final temperature: 275 EC, hold for 5 min.

  • Carrier gas (helium) flow rate: 40 mL/min Temperature program: Initial temperature: 50 EC, hold for 3 min Program: 50 EC to 170 EC, at 6 EC/min Final temperature: 170 EC, hold for 4 min.

  • Carrier gas (helium) flow rate: 5-7 mL/min Makeup gas (helium) flow rate: 30 mL/min Injector temperature: 200 EC Detector temperature: 340 EC Temperature program: Initial temperature: 45 EC, hold for 3 min Program: 45 EC to 275 EC, at 12 EC/min Final temperature: 275 EC, hold for 12 min.

  • PRIORITIES • Decide on priorities for action within the above headings in collaboration with the Managing Director.

  • The selected data for the numerical application are summarized as follows: ▪ Total time of simulation = 45 [s]▪ Increment of initial time = 0.25 [s]▪ Increment of minimal initial time = 0.125 [s]▪ Increment of maximal initial time = 0.5 [s]▪ Initial temperature of the disc = 60 [°C]▪ Material: Gray cast iron (FG 15).

  • Initial temperature field (17d) is known, and boundary conditions are of the third kind (17b)–(17c).

Related to Initial temperature

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Modular building manufacturer means a person or corporation who owns or operates a

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Storage area means any location, facility, or vehicle which is used to store, to transport, or to secure a radiographic exposure device, a storage container, or a sealed source when it is not in use and which is locked or has a physical barrier to prevent accidental exposure, tampering with, or unauthorized removal of the device, container, or source.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • parking meter means an apparatus for use on or in the vicinity of a parking place for indicating, as respects a space provided at that parking place for the leaving of vehicles, whether the initial charge has been paid and whether the period for which payment was made by the initial charge has expired;

  • Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.

  • Municipal separate storm sewer system (MS4 means a conveyance or system of conveyances (including roads with drainage systems, municipal streets, catch basins, curbs, gutters, ditches, man-made channels, or storm drains):

  • Small municipal separate storm sewer system or "small MS4" means all separate storm sewers that are (i) owned or operated by the United States, a state, city, town, borough, county, parish, district, association, or other public body (created by or pursuant to state law) having jurisdiction over disposal of sewage, industrial wastes, stormwater, or other wastes, including special districts under state law such as a sewer district, flood control district or drainage district, or similar entity, or an Indian tribe or an authorized Indian tribal organization, or a designated and approved management agency under § 208 of the CWA that discharges to surface waters and (ii) not defined as "large" or "medium" municipal separate storm sewer systems or designated under 4VAC50-60-380 A 1. This term includes systems similar to separate storm sewer systems in municipalities, such as systems at military bases, large hospital or prison complexes, and highway and other thoroughfares. The term does not include separate storm sewers in very discrete areas, such as individual buildings.

  • TENDER SPECIFICATIONS means the Scope of Work, Special Instructions / Conditions, Technical specifications/requirement , Appendices, Site Information and drawings pertaining to the work and any other relevant reference in the Tender Document for which the Bidder are required to submit their offer.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • HVAC System is defined in Section 6.10(a)(v).

  • Storage Space means a space where goods of non-hazardous nature are stored and includes cold storage and banking safe vaults;

  • Installation Site means the site at which the Product is originally installed.

  • Municipal separate storm sewer system means a conveyance or system of conveyances including roads with drainage systems, municipal streets, catch basins, curbs, gutters, ditches, manmade channels, or storm drains.

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Work area means a room or defined space in a workplace where hazardous chemicals are produced or used, and where employees are present.

  • Building system means plans, specifications and docu- mentation for a system of manufactured building or for a type or a system of building components, which may include structural, electrical, mechanical, plumbing and variations which are sub- mitted as part of the building system.

  • ILUA Area means the geographical area in relation to which the Framework ILUA applies, as specified in Schedule 2 of the Framework ILUA;

  • Customer Premises Equipment or "CPE" means equipment employed on the premises of a Person other than a Carrier to originate, route or terminate Telecommunications (e.g., a telephone, PBX, modem pool, etc.).

  • Air Conditioning System Is cooling supplied to all finished rooms? Yes No Unknown Does Not Apply Comments: Is the system in operating condition? Yes No Unknown Does Not Apply Comments:

  • Improvement warranty period means a period: