Joint Grooming Process definition

Joint Grooming Process as defined in Section 8.1). Both Parties will endeavor to provide a diverse reliable network that incorporates the most practicable technologies.
Sample 1Sample 2Sample 3
Joint Grooming Process or “Joint Process”) which may define and detail, inter alia,
Sample 1Sample 2Sample 3

Examples of Joint Grooming Process in a sentence

  • The initial mutual Interconnection is not dependent upon completion of the Joint Grooming Process.

  • The Parties shall engineer and shall jointly monitor and enhance all trunk groups consistent with the Joint Grooming Process as set forth in Section 10.

  • As provided in Section 10 below, the Parties agree to consider as part of the Joint Grooming Process the feasibility of combining any of the separate trunk groups into a single two-way trunk group.

  • The Parties shall initially engineer and shall jointly monitor and enhance all trunk groups consistent with the Joint Grooming Process as set forth in Section 10.

  • Such cooperation shall include taking such actions as agreed in the Joint Grooming Process and providing notification of a Force Majeure Event, if possible and commercially reasonable.

  • Such requests shall be made as part of the Joint Grooming Process established pursuant to subsection 10.1; provided, however, that the Parties shall commence negotiations to determine the technically feasible and geographically relevant location(s) of the additional IP(s) as soon as reasonable practicable following a Party’s request therefor.

  • The Parties shall initially engineer and shall jointly monitor and enhance all trunk groups consistent with the Joint Grooming Process.

  • The initial mutual interconnection is not dependent upon completion of the Joint Grooming Process.

  • Especially, some bridges disturb flood flow, resulting in overflowing, while all the existing bridges have the discharge capacity only with return period of less than 15- year.

  • Such requests shall be made as a part of the Joint Grooming Process established pursuant to Subsection 10.1; provided, however, that the Parties shall commence negotiations to determine the technically feasible and geographically relevant location(s) of the additional IP(s) as soon as reasonably practicable following a Party’s request therefor.

Related to Joint Grooming Process

  • Manufacturing Process means any process for—

  • The Works/Project means the works to be executed or done under this contract.

  • Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Secondary dose monitoring system means a system which will terminate irradiation in the event of failure of the primary dose monitoring system.

  • Cannabis processing facility means a person that:

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Primary dose monitoring system means a system which will monitor the useful beam during irradiation and which will terminate irradiation when a pre-selected number of dose monitor units have been delivered.

  • Bidding Process means the procurement procedure under which sealed bids are invited, received, opened, examined and evaluated for the purpose of awarding a contract;

  • Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading areas, process areas, stockpiles, stock pile working, plant parking lots, and plant roads (including access roads and haul roads).

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • RFP Process or “Bidding Process” means the process governing the submission and evaluation of the Bids as set out in the RFP itself;

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Cannabis production establishment agent registration card means a registration card that the department issues that:

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Generation Interconnection Facilities Study means a Facilities Study related to a Generation Interconnection Request.

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Development Site means any parcel or lot on which exists or which is intended for building development other than the following:

  • Airport Ground Support Equipment means vehicles and equipment used at an airport to service aircraft between flights.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Recycling facility means equipment used by a trade or business solely for recycling:

  • Respiratory protective equipment means an apparatus, such as a respirator, used to reduce an individual's intake of airborne radioactive materials.