Kill switch definition

Kill switch means a device for shutting off the engine of a personal watercraft in the event the operator falls off the personal watercraft while it is underway.
Kill switch means a control which when activated results in the immediate shut-down of wave-generating equipment.
Kill switch means a mechanism which is attached to the skipper or operator of a small vessel and which stops the engines when that person loses his or her footing or becomes otherwise incapacitated;

Examples of Kill switch in a sentence

  • This option determines if a Kill switch or Tamper switch are connected to the system.

  • Notwithstanding any other provisions of law, a licensing agency may not reinstate or otherwise affect a license suspended, revoked or modified by the District Court pursuant to a complaint filed by the Attorney General without the approval of the Attorney General;[PL 2009, c.

  • If the target speed is negative, a “Limit/kill switch” error will occur.• Kill switch: When the scaled value of the channel is above 1600 (50%), the kill switch will be considered active and the “Limit/kill switch” error will occur, preventing the motor from moving.

  • THE OUTGOING AND INCOMING DRIVERS COUNT TOWARDS THAT FIVE (5).− Kill switch must be turned off during fueling.− No working on car while the car is being fueled; no work – of any kind, including tire pressure & temps, cleaning windows, cooling suit maintenance, GoPro camera adjustment, etc., may be done to the car while the gas cap is off.− Fueling team members must all be wearing full safety gear (like the drivers), including a helmet with a closed visor (OK if fueling helmet is expired).

  • Kill switch must remain in closed position (engine not running) until driver mounts mower.

  • Kill switch must stop power to both engine and electric fuel pump(s).

  • Kill switch will be connected to boat operator any time the outboard motor is running and in gear.

  • Kill switch servers ideally have the capacity to broadcast offending UAppIDs to devices at any given time (i.e., push).

  • To avoid this driver is provided with a Kill switch on the dashboard and near the seat.

  • By far the most prevalent type of PWC incident is a collision between boats (59 percent) and more often than not this involves a collision between two PWCs. Figure 5: PWC incidents 60% 59% 50% 40% 30% 20% 10% 9% 8% 7% 7% 0% 5.1.2 Kill switch safety lanyardThe nature of jet skiing includes an expectation that the driver and passenger/s may fall overboard, and that the boat may capsize and right itself on a regular basis.


More Definitions of Kill switch

Kill switch means a mechanism that is attached to the skipper or operator of a vessel and that stops the engines when a person loses his or her footing or becomes otherwise incapacitated.
Kill switch means a device for shutting otf the engine of a personal watercraft in the event the operator falls otf the personal watercraft while it is underway.
Kill switch means a mechanism is attached to the skipper or operator of a small vessel and which the engines should that person lose their footing or become otherwise incapacitated;

Related to Kill switch

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • Packet Switch is a router designed to read the destination address in an incoming cell or packet, consult a routing table and route the packet toward its destination. Packetizing is done in originating CPE and reassembly is done in terminating CPE. Multiple packet formats or protocols exist (e.g., x.25, x.75, frame relay, ATM, and IP).

  • Tandem Switch or “Tandem Office” or “Tandem” is a switching entity that has billing and recording capabilities and is used to connect and switch trunk circuits between and among End Office Switches and between and among End Office Switches and carriers’ aggregation points, points of termination, or points of presence, and to provide Switched Exchange Access Services.

  • Tandem Office Switch or “Tandem(s)” are used to connect and switch trunk circuits between and among other Central Office Switches. A Tandem Switch does not include a PBX.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Signal means any transmission of radio frequency energy or of optical information.

  • End Office Switches (“EOs”) are switches from which end user Telephone Exchange Services are directly connected and offered.

  • End Office Switch or “End Office” is a switching machine that directly terminates traffic to and receives traffic from purchasers of local exchange services. An End Office Switch does not include a PBX.

  • Electric bicycle means a “class 1 electric bicycle”, a “class 2 electric bicycle”, or a “class 3 electric bicycle” as defined in this section. (ORC 4511.01(RRR))

  • Fire fighter means any person employed by the state or any political subdivision as a member or officer of a fire depart- ment or a member of a volunteer department, including the state fire marshal and deputies.

  • Switch means a switching device employed by a Carrier within the Public Switched Network. Switch includes but is not limited to End Office Switches, Tandem Switches, Access Tandem Switches, Remote Switching Modules, and Packet Switches. Switches may be employed as a combination of End Office/Tandem Switches. "Switched Access Service" means the offering of transmission and switching services to Interexchange Carriers for the purpose of the origination or termination of telephone toll service. Switched Access Services include: Feature Group A, Feature Group B, Feature Group D, 8XX access, and 900 access and their successors or similar Switched Access Services. "Switched Access Traffic" is traffic that originates at one of the Party's End User Customers and terminates at an IXC Point of Presence, or originates at an IXC Point of Presence and terminates at one of the Party's End User Customers, whether or not the traffic transits the other Party's network.

  • Service Switching Point (SSP) means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • Ethernet means a family of computer networking technologies for LANs.

  • Electrical Fitter means an employee who is mainly employed in the workshops manufacturing, fitting, and repairing electrical instruments, machines, and apparatus. Electrical fitting in this definition shall include armature and transformer winding, and people solely engaged in making and repairing instruments. The legitimate possession of a certificate of competency in this particular class of work issued by the Electrical Licensing Board under the Electricity Act 1994 shall be recognised as proof of efficiency.

  • SDSL or "Symmetric Digital Subscriber Line" is a baseband DSL transmission technology that permits the bi-directional transmission from up to 160 kbps to 2.048 Mbps on a single pair. "VDSL" or "Very High Speed Digital Subscriber Line" is a baseband DSL transmission technology that permits the transmission of up to 52 Mbps downstream (from the Central Office to the End User Customer) and up to 2.3 Mbps digital signal upstream (from the End User Customer to the Central Office). VDSL can also be 26 Mbps symmetrical, or other combination.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Customer-generator means a user of a net metering system.

  • Pupil Generated Content The term “pupil-generated content” means materials or content created by a pupil during and for the purpose of education including, but not limited to, essays, research reports, portfolios, creative writing, music or other audio files, photographs, videos, and account information that enables ongoing ownership of pupil content.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Serving Wire Center (SWC) means the Wire Center that serves the area in which the other Party’s or a Third Party’s Wire Center, aggregation point, point of termination, or point of presence is located.

  • Dead-man switch means a switch so constructed that a circuit closing contact can be maintained only by continuous pressure on the switch by the operator.

  • Motorized wheelchair means any self-propelled vehicle designed for, and used by, a handicapped person and that is incapable of a speed in excess of eight miles per hour.

  • Flowgate means a representative modeling of facilities or groups of facilities that may act as potential constraint points.

  • CDSL means Central Depository Services (India) Ltd.

  • Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.