Low Temperature definition

Low Temperature means-
Sample 1Sample 2Sample 3
Low Temperature means that the process chiller is capable of delivering its rated cooling capacity at an indoor heat exchanger outlet temperature of -25°C at standard rating conditions (also called 'low brine') with leaving brine temperature between -8°C and - 25°C
Sample 1Sample 2
Low Temperature means Daily Minimum Temperature (° C) recorded at the reference weather station below the trigger level consecutively for a specific no. of days during the reference period. Or The sum total of deviations in daily actual minimum temperature recorded at the reference weather station below the trigger level during the reference period or for different months during the reference period.
Sample 1

Examples of Low Temperature in a sentence

  • Low- Temperature Flexibility: Passes after testing at minus 20 deg F; ASTM D 1970.

  • Low Temperature Bend (Flexibility): Pass at -40 °F in accordance with ASTM D 2136.

  • A cold flow performance measurement which meets the ASTM D 975 tenth percentile minimum ambient air temperature charts and maps by either ASTM Standard Test Method D 2500 (Cloud Point) or ASTM Standard Test Method D 4539 (Low Temperature Flow Test, LTFT).

  • NOTE: When the National Weather Service projects extended cold periods with ambient temperatures significantly lower than those listed in the "Low Temperature Operability Table" or a particular locale frequently/usually has lower ambient temperatures, then the oil supplied relative to those deliveries shall have the maximum cloud and cold filter plugging point temperatures lowered to meet actual low ambient operability requirements.

  • Low Temperature Operability - A cold flow performance measurement which meets the most recent ASTM D 975-12a tenth percentile minimum ambient air temperature charts and maps for New Hampshire by either the most recent ASTM Standard Test Method D 2500 (Cloud Point), or most recent ASTM Standard Test Method D 4539 (Low Temperature Flow Test, LTFT).

  • Resistance at Low Temperature:- The material shall show no cracks on application to concrete blocks.

  • Low Temperature Flexibility: -30 °F (-34 °C) when tested in accordance with ASTM D 5147.

  • B3.8.4 Cable Loop for Prevention of Vibration and Low Temperature Cold Store A loop shall be introduced in a cable immediately before its entry into an equipment which is subject to vibration or occasional movement.

  • Low Temperature Operability - A cold flow performance measurement which meets the most recent ASTM D 975-15 tenth percentile minimum ambient air temperature charts and maps for New Hampshire by either the most recent ASTM Standard Test Method D 2500-11 (Cloud Point), or most recent ASTM Standard Test Method D 4539-10 (Low Temperature Flow Test, LTFT).

  • Low Temperature Flexibility: Passing test specified in ASTM D1970/D1970M.


More Definitions of Low Temperature

Low Temperature means that the condensing unit is capable of delivering its rated cooling capacity at a saturated evaporating temperature of – 35 °C;
Sample 1
Low Temperature means that the process chiller is capable of delivering its rated cooling capacity at an indoor heat exchanger outlet temperature of – 25 °C, at standard rating conditions;
Sample 1

Related to Low Temperature

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Consumption Data means customer specific electric usage data, or weather adjusted data, including but not limited to kW, kWh, voltage, var, power factor, and other information that is recorded by the electric meter for the Company and stored in its systems. Consumption Data also includes payment and service history, account number, and amount billed.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Generator means a device that produces electricity.

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Storage area means any location, facility, or vehicle which is used to store, to transport, or to secure a radiographic exposure device, a storage container, or a sealed source when it is not in use and which is locked or has a physical barrier to prevent accidental exposure, tampering with, or unauthorized removal of the device, container, or source.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Outputs means the goods or services that are produced by an entity or other person;

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Low water pressure means water pressure below the regulatory reference level which is the minimum pressure when demand on the system is not abnormal.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Density means the permitted number of dwelling units per

  • Pressure means the total load or force per unit area acting on a surface.

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.