Opening pressure definition

Opening pressure means the pressure referred to in a list of substances at which the high velocity vent valves open. For pressure tanks the opening pressure of the safety valve shall be established in accordance with the requirements of the competent authority or a recognized classification society;
Sample 1Sample 2
Opening pressure kPa3 or characteristic diagram:2, 3
Sample 1
Opening pressure kPa3 or characteristic diagram2, 3: 3.1.2.4. Governor 3.1.3. Cold start system
Sample 1

Examples of Opening pressure in a sentence

  • Opening pressure of the pressure relief valves/high-velocity vent valves/safety valves kPa1) 2) 8.

  • Opening pressure for this system is 17,1 MPa and closing pressure is 16,6 MPa. [3]Safety valve system consists of two identical safety mechanisms that differ by the pressure setpoint.

  • Opening pressure is imperative and every junior shouldlearn how to do this and what to do if it is abnormalPaediatric neurologistPlasma glucose MUST be taken before LP.

  • The Dual Oscillator Model (DOM) [17] represents the process of insulin secretion for a single β-cell by seven differential equations (1a)–(1g) consisting of three com- ponents: electrical, mitochondrial, and glycolytic.

  • The following opening pressure ranges for the gravitation unit are possible, the pressure range selected can be checked postoperatively on X- ray image: Opening pressure for vertical postureCoding of gravitational unit10 cmH2O small, no ring15 cmH2O large, no ring20 cmH2O large, 1 ring25 cmH2O large, 2 rings30 cmH2O large, 3 rings35 cmH2O large, 4 rings Coding ring a) b) Fig.

  • B3 B3 B3 B5 B5 B7 B6 B6 B2 B1B7 B6B6 B5 B5B4 B4 B4Figure 3 Computing domain showing labels for boundary conditions.The boundary conditions imposed are as follows:B1: Opening pressure for entrainment with a solar heat flux (715w/m2) as the boundary source for radiation modelling.

  • Opening pressure <75 ± 27 cmH₂O in line with average adult MIP Objective 7: Redesign the device based on these findings, aiming to add features to increase effectiveness of device to achieve objectives 1-6.

  • This is to simulate the external environment.B2: Opening pressure for entrainment and the local temperature ( Tin =20°C).

  • Opening pressure measurement not available or pressure outside the range required for probable iNPH.

  • The first sentence of Opening pressure would read: “Opening pressure means the pressure referred to om column (10) of Table C of Chapter 3.2 at which the pressure relief valves/high-velocity vent valves open.”.

Related to Opening pressure

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Pressure means relative pressure versus atmospheric pressure, unless otherwise stated.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Vapor pressure as herein used means Vapor Pressure at 100° Fahrenheit as determined by ASTM Method D-323-90, "Standard Method of Test for Vapor Pressure of Petroleum Products (Reid Method)."

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Receipt Point means the receipt/inception point(s) where Crude Oil is received into the Gathering System, as such points are specified in Section II of this tariff.

  • design pressure means the maximum pressure that a pressure vessel or plant is designed to withstand safety when operating normally;

  • Loading Port means the port of Port Hedland or if iron ore is not shipped, or is not shipped from that port, then such port (which may include the port of Port Hedland) as the Minister may determine for the purpose of this definition;

  • Loading Zone means a parking stall which is set aside for use by commercial vehicles if there is a sign referable to that stall marked ‘Loading Zone’;

  • Intake means “Sanctioned Intake”.

  • Outdoor cultivation means the cultivation of mature cannabis without the use of artificial lighting or light deprivation in the canopy area at any point in time. Artificial lighting is permissible only to maintain immature plants outside the canopy area.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Receipt Point(s) means the receipt points set forth in Section 6 of this Toll Schedule.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Pressure vessel means a vessel that may be used for containing, storing, distributing, transferring, distilling, processing or otherwise handling any gas, vapour or liquid under pressure greater than the atmospheric pressure and includes any pipeline fitting or other equipment attached thereto or used in connection therewith; and

  • CO2 means carbon dioxide.

  • Monitoring well means a water well intended for the purpose of determining groundwater quality or quantity.

  • Cultivation site means a location where cannabis is planted, grown, harvested, dried, cured, graded, or trimmed, or a location where any combination of those activities occurs.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Slash means all debris created on the Work area by the precommercial thinning operation.