Operational parameter definition

Operational parameter means a measurable characteristic of the operation of a piece of equipment or control apparatus.
Sample 1Sample 2Sample 3
Operational parameter means a measurable property used to characterize or partially characterize the operation of a treatment process and must confirm the treatment barriers are intact to ensure the process is meeting the water quality and pathogen/chemical removal goals.
Sample 1

Examples of Operational parameter in a sentence

  • Response to Comment 39: The final rule has been amended to remove the requirement for testing of both SO2 and HCl. Operational parameter requirements specified for HCl have been removed.

  • In case the requirement is to amend an Operational parameter of SQR, the approval for same would be accorded by AoN according authority.

  • During this task the assets that can be controlled shall be cataloged along with the following information: • Operational parameter that can be changed to optimize the system.• Operational limitations (pump curves, duty cycles, maximum flows, etc.).• Upstream and downstream hydraulic constraints for each asset.• Travel times to each constraint.• Effect of asset operations on each hydraulic constraint.• Brief narrative of the opportunity presented to achieve the objective through the control of the asset.

  • Operational parameter targets have been established with the expectation of minor adjustments for fine tuning ongoing.

  • However, within this building, there would be rooms that overlook this space.

  • Operational parameter: A measurable property used to characterize or partially characterize the operation of a treatment process and must confirm the treatment barriers are intact to ensure the process is meeting the water quality and pathogen/chemical removal goals (California State Water Resources Control Board, 2023; Colorado Department of Public Health and Environment, 2023a).xxxviii.

  • Playful handling as social enrichment forindividually- and group-housed laboratory rats.

  • Operational parameter demands of UAV used for sample collection 124Table 18.Mean microcystin (MC) concentrations (µg/L), gene concentrations (log [gene copies/mL]), and NDVI values across locations 138Table 19.

  • Term Definition Comments Method Action described by e.g. generic document that provides rules, guidelines or charac- teristics for tests or analysis An in-house method may be used in the absence of a standard, if prepared in com- pliance with the format and contents re- quired for standards, see e.g. [4] Operational parameter Measurable parameters that define the application and the verification and test conditions.

  • The input operational parameter values, as presented in Table 5-1, are used as constant throughout the study unless mentioned specifically.Table 5-1: Operational parameter values for the base case system.

Related to Operational parameter

  • Program Parameter means, in respect of a program, the provincial standards (such as operational, financial or service standards and policies, operating manuals and program eligibility), directives, guidelines and expectations and requirements for that program;

  • Operational Plan means a Forest Stewardship Plan, Woodlot Licence Plan, a Range Use Plan, or Range Stewardship Plan, as those terms are defined in provincial forest and range legislation;

  • Project Operational Manual means the Project Operational Manual, to be adopted in accordance with Section 6.01 (a) of this Agreement, giving details of guidelines and procedures agreed with the Association for the implementation, supervision, and monitoring and evaluation, of the Project, and the procurement procedures and guidelines for Sub-Projects, as same may be amended from time to time in agreement with the Association, and such term includes any schedules to the Project Operational Manual;

  • Operational Services the operational services described as such in the Services Description;

  • Operational Manual means the manual referred to in Section 3.03 of this Agreement;

  • Operational Control means Security monitoring, adjustment of generation and transmission resources, coordinating and approval of changes in transmission status for maintenance, determination of changes in transmission status for reliability, coordination with other Balancing Authority Areas and Reliability Coordinators, voltage reductions and load shedding, except that each legal owner of generation and transmission resources continues to physically operate and maintain its own facilities.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this chapter, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, oxygen or carbon dioxide concentrations), and to record average operational parameter value on a continuous basis.

  • Operational Flow Order means any directive issued to a Customer by KUB which requires the Customer to adjust Deliveries to KUB or deliveries of non-Firm gas to the Customer by KUB.

  • Parameter means a measurable factor of a liquid, gas, or solid such as temperature, pH, length, or elevation, and includes constituents of the liquid, gas, or solid.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Operational Acceptance means the acceptance by the Procuring Entity of the Facilities (or any part of the Facilities where the Contract provides for acceptance of the Facilities in parts), which certifies the Contractor's fulfillment of the Contract in respect of Functional Guarantees of the Facilities (or the relevant part thereof) in accordance with the provisions of GCC Clause 28 (Functional Guarantees) hereof and shall include deemed acceptance in accordance with GCC Clause 25 (Commissioning and Operational Acceptance) hereof.

  • operational area means the geographical area wherein an operational activity is to take place;

  • railway operational procedures means procedures specified under any access agreement (as defined in the Railways Act 1993) or station lease;

  • Operational means that the system or sensor, at the time of the event, is active or can be activated/deactivated by the driver.

  • operating site means a site, other than an aerodrome, selected by the operator or pilot-in-command or commander for landing, take-off and/or external load operations;

  • Operational Hours for the Facility means the total across all Generating Units of the number of hours each of the Facility’s Generating Units are potentially capable of producing power at its Nameplate Capacity Rating regardless of actual weather, season and time of day or night, without any mechanical operating constraint or restriction, and potentially capable of delivering such power to the Point of Delivery in a Contract Year. During up to, but not more than, 200 hours of Planned Maintenance during a Contract Year for each Generation Unit and hours during which an event of Force Majeure exists, a Generation Unit shall be considered potentially capable of delivering such power to the Point of Delivery. For example, in the absence of any Planned Maintenance beyond 200 hours on any Generation Unit of Event of Force Majeure, the Operational Hours for a wind farm with five separate two MW turbines would be 43,800 for a Contract Year.

  • Database Management System (“DBMS”) is a computer process used to store, sort, manipulate and update the data required to provide Selective Routing and ALI.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).