Oversized Load definition

Oversized Load means a load that is wider than 3.2
Sample 1Sample 2Sample 3

Examples of Oversized Load in a sentence

  • Oversized Load is any load or vehicle required by State of California Department of Motor Vehicles current Vehicle Code Division 15 - Size, Weight, and Load.

  • Traffic Control Contractor Company: Contractor Name: Phone Number: Oversized Load: Contact the Engineering Department at 319-743-6340 with any questions.

  • Refer to Local Entity for permit requirements.A. Long Combination VehiclesLong Combination Vehicles (LCVs) may be authorized on an annual basis over specific routes and hours in accordance with the Model Traffic Code.B. Oversized Load PermitAn Oversized Load Permit shall be required for oversized loads in accordance with the Model Traffic Code.

  • Oversized Load means vehicles and loads that exceed legal size or weight limits as determined by the Texas Department of Motor Vehicles.

  • Accepted the proposal by Bluewater Power, as the sole source consultant, for engineering services to complete the engineering and design for areas of concern along the Oversized Load Corridor route for $152,432 (including non- rebateable HST).

  • Oversized Load Permit: The state and local agencies require a permit to operate or move a vehicle or combination of vehicles or special mobile equipment of a size or weight of vehicle or load exceeding the maximum specified in Division 15 of the California Vehicle Code.

  • The performance fee shall accrue quarterly and be payable annually in arrears (pro rata for partial periods) within three months after the end of each calendar year.

  • Oversized Load - California Transportation Permit - Issued for movement of non-divisible (exceeding applicable length, width, height, or weight limit) loads, not circumventing California Vehicle Code requirements.

  • Oversized Load Permits Power to be DelegatedIssuance of oversized load permitsDelegate(s)Director of Operations and Protective Services or designateConditions and LimitationsAs per the Municipal Act, 2001 sections 9, 10 and 23.1 7.

  • Any required utility or other infrastructure relocations shall be done in accordance with the effected utility or infrastructure owner’s policies and procedures, including payment of all required fees.Section 6.5 Oversized Load Permit C.

Related to Oversized Load

  • Inter-connection Point means interface point of renewable energy generating facility with the transmission system or distribution system, as the case may be:

  • Available Flowgate Capability or “AFC” shall mean the rating of the applicable Flowgate less the projected loading across the applicable Flowgate less TRM and CBM. The firm AFC is calculated with only the appropriate Firm Transmission Service reservations (or interchange schedules) in the model, including recognition of all roll-over Transmission Service rights. Non- firm AFC is determined with appropriate firm and non-firm reservations (or interchange schedules) modeled.

  • Activated reserve components means members of the reserve component of the uniformed services who have received a notice of intent to deploy or mobilize under Title 10 of the United States Code, Title 32 of the United States Code, or state mobilization to active duty.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Monitoring System means a system established by BNY to fulfill the Responsibilities specified in clauses (d) and (e) of Section 1 of Article III of this Agreement.

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • PAD means a Preauthorized Debit.

  • Wastewater treatment facility means a treatment works, as

  • Maintenance Programme shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause 14.2;

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Ramp means a device to bridge the gap between the floor of a passenger compartment and the ground or kerb. In its position for use, it includes any surface that may move as part of the ramp deployment or be available for use only when the ramp is in its deployed position and over which a wheelchair is intended to travel.

  • Motorized bicycle means any vehicle that either has two tandem wheels or one wheel in the front and two wheels in the rear, that is capable of being pedaled, and that is equipped with a helper motor of not more than fifty cubic centimeters piston displacement that produces no more than one brake horsepower and is capable of propelling the vehicle at a speed of no greater than twenty miles per hour on a level surface.

  • User Interface(s means any technologies thatiii. Customer owns and/or for which Customer has secured an appropriate license/subscription and is/areiv. used to develop/manage user interaction features and characteristics for ERP. Solely for clarity regarding ERP licensing requirements under a contract, User Interfaces for ERP shall be deemed part of ERP and therefore require human users Using ERP via such User Interfaces to have a “Named User” and/or “User” license for ERP, as applicable.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Site Host Load means the electric energy produced by or associated with the Facility that serves electrical loads (that are not Station Use) of Seller or one or more third parties conducted pursuant to California Public Utilities Code Section 218(b).

  • Processing facility means an establishment that prepares, treats, or converts tangible personal property into finished goods or another form of tangible personal property. The term includes a business engaged in processing agricultural, aquacultural, or maricultural products and specifically includes meat, poultry, and any other variety of food processing operations. It does not include an establishment in which retail sales of tangible personal property are made to retail customers.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Video programming means programming provided by, or generally considered comparable to programming provided by, a television broadcast station.

  • Unmetered Load means electricity consumed on the Network that is not directly recorded using Metering Equipment, but is calculated or estimated in accordance with the Code;

  • Non-Administrator Dialysis Facility means a Dialysis Facility which does not have an agreement with the Claim Administrator or another Blue Cross and/or Blue Shield Plan but has been certified in accordance with the guidelines established by Medicare.

  • Generation Interconnection Facilities Study means a Facilities Study related to a Generation Interconnection Request.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Vending facility means automatic vending machines, cafeterias, snack bars, cart service, shelters, counters, and such other appropriate auxiliary equipment which may be operated by licensed managers and which is necessary for the sale of newspapers, periodicals, confections, tobacco products, foods, beverages, and other articles or services dispensed automatically or manually and prepared on or off the premises in accordance with all applicable health laws and including the vending or exchange of chances for any lottery authorized by State Law and conducted by an agency of a State within such State. [CFR 34, Part 395.1(X)]

  • smart metering system means an electronic system that is capable of measuring electricity fed into the grid or electricity consumed from the grid, providing more information than a conventional meter, and that is capable of transmitting and receiving data for information, monitoring and control purposes, using a form of electronic communication;

  • Cannabis processing facility means a person that:

  • Interconnection Facilities means the Transmission Owner Interconnection Facilities and the Customer Interconnection Facilities.