Peak power definition

Peak power. (6) means the highest power attained in the "pulse duration".
Sample 1Sample 2Sample 3
Peak power means the power supplied from the Project during Peak Hours;
Sample 1Sample 2Sample 3
Peak power. (6), means the highest level of power attained in the “laser duration”.
Sample 1Sample 2Sample 3

Examples of Peak power in a sentence

  • Peak power is the power generated or purchased at times of day when high levels of power consumption are expected.

  • This configuration allows to generate pressure about four times higher and two times longer than in direct regime for the same laser parameters (Peak power density, pulse duration, wavelength).

  • Reference iii.Design of module at standard test condition a) Peak power watt b) Peak power voltage c) Peak power current d) Open circuit voltage iv.No. of SPV Modules proposed to achieveminimum KWp DC power v.Short circuit current of PV module (Amp.) vi.Open circuit voltage of PV Module (V) vii.Max.

  • Peak power output, the lactate threshold, and time trial performance in cyclists.

  • Table 2.2: Laser facilities (>∼100 TW) performing LWFA R&D in Europe.Facility Institute Location Energy Peak power Rep.


More Definitions of Peak power

Peak power means the power supplied from the Project during Peak Hours.
Sample 1Sample 2Sample 3
Peak power is the power in watt peak that a PV-module generates in its maximum power point under STC condition. ‘STC’ are as follows:
Sample 1Sample 2
Peak power is the power in watt peak that a PV-module generates in its maximum power point. SUNMAN measurements are as follows (a) light spectrum of AM 1.5, (b) an irradiation of 1,000W per m2 and (c) a cell temperature of 25 degree Centigrade. The measurements are carried out in
Sample 1Sample 2
Peak power is the power in peak wxxxx that a PV module generates at STC (Standard Test conditions: Irradiance of 1000 W/m2, light spectrum AM 1.5g and a cell temperature of 25 degrees C)
Sample 1
Peak power is the power in watt peak that a PV-module generates in its maximum power point. Jinko Solar measurements are as follows (a) light spectrum of AM 1.5, (b) an irradiation of 1,000W per m2 and (c) a cell temperature of 25 degree Centigrade. The measurements are carried out in accordance with IEC61215 as tested at the junction box terminals per the calibration and testing standards of Jinko valid at the date of manufacture of the PV-Modules. Jinko’s calibration standards shall be in compliance with the standards applied by international institutions accredited for this purpose.
Sample 1
Peak power means the peak e.i.r.p. contained within a 50 MHz bandwidth at the frequency at which the highest mean radiated power occurs, radiated in the direction of the maximum level under the specified conditions of measurement;
Sample 1
Peak power. (6), means energy per pulse in joules divided by the pulse duration in seconds.
Sample 1