Primary Measurement Devices definition

Primary Measurement Devices means the meter body (which may consist of an orifice meter, positive meter, turbine meter, ultrasonic meter, v-cone, or coriolis meter), tube, orifice plate, connected pipe, tank strapping, and fittings used in the measurement of Gas flow.
Sample 1Sample 2Sample 3
Primary Measurement Devices has the meaning set forth in the Gathering Agreement.
Sample 1

Examples of Primary Measurement Devices in a sentence

  • On those drill pads where Gatherer does not install a custody transfer meter, Gatherer shall maintain, calibrate, and operate the Primary Measurement Devices, at Gatherer’s expense.

  • On those drill pads where Gatherer does not install a pad level custody transfer meter, Gatherer shall maintain, calibrate, and operate the Primary Measurement Devices, at Gatherer’s expense.

  • When it has been established that the subject is eligible for possible participation in the study, written info rmedAlcon - Business Use Only Protocol - $linicalEffective Date: 22-Aug-2017Document: TD0$-0052735 Status: EffectiveVersion: 4.0; most-Recent; Effective; $uRREnTPage 34 of 83consent will be obtained.

  • None of the Primary Measurement Devices for Producers’ Wellhead Meters will have been transferred to Gatherer.

  • Gatherer shall operate the Primary Measurement Devices located at the Receipt Point(s) and shall install, own, operate and maintain the Primary Measurement Devices located at the Delivery Point(s) and any check meters at the Delivery Point(s).

  • Producers agree to transfer (free from all liens and encumbrances) to Gatherer the Primary Measurement Devices with respect to xxxxx or pads in which Producers’ and their Affiliates own 100% of the working interest as soon as reasonably practicable after the Effective Date.

  • Producers agree to transfer (free from all liens and encumbrances) to Gatherer the Primary Measurement Devices with respect to xxxxx or pads in which Producers’ and their Affiliates owned 100% of the working interest as soon as reasonably practicable after the Effective Date.

  • Producers agree to transfer (free from all liens and encumbrances) to Gatherer any interest they may hold in the Primary Measurement Devices with respect to xxxxx or pads in which Producers’ and their Affiliates and the CHK Parties own 100% of the working interest as soon as reasonably practicable after the Effective Date.

  • Producers agree to transfer, or cause to be transferred (free from all liens and encumbrances), to Gatherer the Primary Measurement Devices with respect to xxxxx or pads in which Producers’ and their Affiliates or Producers’ and their Affiliates and the Total Parties owned 100% of the working interest on September 30, 2009 as soon as reasonably practicable after the Effective Date.

  • The agreement includes certain financial covenant requirements relating to the Refinery's working capital, cash earnings, tangible net worth and fixed charge coverage.

Related to Primary Measurement Devices

  • COVID-19 Measures means any quarantine, “shelter in place,” “stay at home,” workforce reduction, social distancing, shut down, closure, sequester or any other Law, directive, guidelines or recommendations by any Governmental Authority (including the Centers for Disease Control and the World Health Organization) in each case in connection with, related to or in response to COVID-19, including the Coronavirus Aid, Relief, and Economic Security Act (CARES) or any changes thereto.

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Supportive measures means individualized services that are offered to the complainant or the respondent designed to restore or preserve equal access to the District’s education program or activity without unreasonably burdening the other party. The supportive measures must be non-disciplinary and non-punitive in nature; offered before or after the filing of a formal complaint or where no formal complaint has been filed; and offered to either party as appropriate, as reasonably available, and without fee or charge. Examples of supportive measures include, but are not limited to: measures designed to protect the safety of all parties or the District’s educational environment, or deter sexual harassment; counseling; extensions of deadlines or other course-related adjustments; modifications of work or class schedules; campus escort services; mutual restrictions on contact between the parties; changes in work or class locations; leaves of absence; and increased security and monitoring of certain areas of the campus.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this chapter, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, oxygen or carbon dioxide concentrations), and to record average operational parameter value on a continuous basis.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Preventive measures means any reasonable measures taken by any person after an incident has occurred to prevent or minimize pollution damage.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Daily Measurement Value means the Specified Dollar Amount (if any), divided by 40.

  • Operating parameter value means a minimum or maximum value established for a control device or process parameter that, if achieved by itself or in combination with one (1) or more other operating parameter values, determines that an owner or operator has complied with an applicable emission limit.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • information gathering measures means laws and administrative or judicial procedures that enable a Contracting Party to obtain and provide the requested information;

  • Performance Measurement Period has the meaning set forth in Section 3.1(e)(ii).

  • Vehicle measuring attitude means the position of the vehicle as defined by the co-ordinates of fiducial marks in the three-dimensional reference system.

  • Performance Monitoring System has the meaning given to it in paragraph 1.1.2 in Part B of Schedule 6 (Service Levels, Service Credits and Performance Monitoring);

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Components means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Master Meter means the meter controlled by the licensed distributor and used for settlement of the master bill with the master consumer;

  • Multiple tomogram system means a computed tomography X-ray system which obtains X-ray transmission data simultaneously during a single scan to produce more than one tomogram.

  • Assistive Devices means any category of durable medical equipment, mechanical apparatus, electrical appliance, or instrument of technology used to assist and enhance an individual's independence in performing any activity of daily living. Assistive devices include the use of service animals, general household items, or furniture to assist the individual.

  • Composite sample means a combination of individual samples of wastewater taken at 1 hour intervals, for eight (8) hours (or for the duration of discharge, whichever is less), to minimize the effect of variability of the individual samples. Individual samples must be of equal volume. (Example: one (1) liter per hour.)