Provider Feed Water Monitoring Equipment definition

Provider Feed Water Monitoring Equipment has the meaning set forth in Section 6.8(e).
Sample 1Sample 2Sample 3

Examples of Provider Feed Water Monitoring Equipment in a sentence

  • Provider will, subject to Section 6.8(j), install redundant sample analyzers in respect of the Feed Water Constituents at the Feed Water Measurement Point (individually and collectively, “Provider Feed Water Monitoring Equipment”), Such Provider Feed Water Monitoring Equipment shall measure the Feed Water Constituents to the applicable levels of accuracy set forth in Schedule 5.2 relative to the applicable determined values.

  • If, however, both of the redundant Provider Feed Water Monitoring Equipment are not operating as designed, and the Off-Taker Feed Water Monitoring Equipment is operating as designed, then the Off-Taker Feed Water Monitoring Equipment will be utilized to determine the Feed, Water Constituents during the period of inoperability in respect of both of.

  • The Provider Feed Water Flow Meter, Provider Feed Water Instruments, Off-Taker Feed Water Instruments, Provider Feed Water Monitoring Equipment and Off-Taker Feed Water Monitoring Equipment shall be subject to the approval of the Parties, and the Parties shall approve the same, in Writing, at least six (6) Months prior to the commencement of the Initial Operating Period (and in any case prior to their installation).

  • When either of the redundant Provider Feed Water Monitoring Equipment is operating as designed, the corresponding measurements will be used to measure the Feed Water Constituents of all corresponding Feed Water delivered to the Feed Water Measuring Point.

  • Provider shall calibrate (as an Operating Expense) each of the Provider Feed Water Flow Meter, Provider Feed Water Instrument, Provider Feed Water Monitoring Equipment, Provider Steam Flow Meter, Provider Steam Instruments and Provider Steam Monitoring Equipment (i) at the frequency recommended by its manufacturer or, if no manufacturer’s recommendation exists, in accordance with Prudent Operating and Maintenance Practices; and (ii) in any event not less than once per six (6) months.

Related to Provider Feed Water Monitoring Equipment

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Metering Equipment means all metering equipment installed at the metering points designated in the appropriate appendix to an Interconnection Service Agreement. Minimum State of Charge:

  • Port Cargo Handling Equipment means rubber-tired gantry cranes, straddle carriers, shuttle carriers, and terminal tractors, including yard hostlers and yard tractors that operate within ports.

  • Fraud Monitoring System means an off-line administration system that monitors suspected occurrences of ABT- related fraud.

  • Service Equipment means any equipment, Software, systems, cabling and facilities provided by or on behalf of Verizon and used to facilitate provision of the Services at a Customer Site. Ownership of the Service Equipment does not pass to Customer. Service Equipment does not include Verizon Facilities.

  • Monitoring Services shall have the meaning set forth in Section 2(b) of this Agreement.

  • Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.

  • Data Processing Equipment means any equipment, computer hardware, or computer software (and the lease or licensing agreements related thereto) other than Personal Computers, owned or leased by the Failed Bank at Bank Closing, which is, was, or could have been used by the Failed Bank in connection with data processing activities.

  • Load Control Equipment means the equipment (which may include, but is not limited to, ripple receivers and relays) that is from time to time installed in, over or on Consumer’s Premises for the purpose of receiving signals sent by Load Signalling Equipment and switching on and off, or otherwise controlling, controllable load;

  • Mobility enhancing equipment means equipment, other than durable medical equipment or a motor vehicle or equipment on a motor vehicle normally provided by a motor vehicle manufacturer, dispensed pursuant to a prescription, including repair or replacement parts for that equipment, that is all of the following:

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Monitoring System means a system established by BNY to fulfill the Responsibilities specified in clauses (d) and (e) of Section 1 of Article III of this Agreement.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Inventory control system means a system described in Section 4-41a-103.

  • Stormwater management system means any equipment, plants,

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • Customer Equipment means hardware, software, systems, cabling and facilities provided by you and used in conjunction with the Equipment that we supply to you in order to receive the Services;

  • Standard equipment means the basic configuration of a vehicle which is equipped with all the features that are required under the regulatory acts of the Contracting Party including all features that are fitted without giving rise to any further specifications on configuration or equipment level.

  • Gasoline dispensing facility means any site where gasoline is dispensed to motor vehicle gasoline tanks from stationary storage tanks.

  • Control system means the combination of capture and control devices used to reduce emissions to the atmosphere.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Operating Equipment means furniture, furnishings, special lighting fixtures, carpeting, draperies, decorations or other special finishing work, signs, appliances and trade fixtures and equipment that is furnished, installed or used by the Contractor in its operations on the Airport. It does not include Fixed Improvements, or repair or maintenance of Operating Equipment or Fixed Improvements or displays or decorations that are of a seasonal or temporary promotional nature.

  • licensed water supplier means a company which is the holder for the time being of a water supply licence under Section 17A(1) of the 1991 Act(f);

  • Control equipment means equipment necessary for the setting and/or unsetting of an immobilizer.