Real Power definition

Real Power means the portion of electricity that supplies energy to the Load.**
Real Power means the power component required to do real work, which is measured in kilowatts (kW);
Real Power means the rate of producing, transferring, or using electrical energy, expressed in kilowatts (“kW”) or megawatts (“MW”).

Examples of Real Power in a sentence

  • The NYS Transmission System Real Power Losses associated with each additional MWh of consumption by Load, or each additional MWh transmitted under a Bilateral Transaction as measured at the Points of Withdrawal.

  • The Transmission Provider is not obligated to provide Real Power Losses.

  • Real Power Losses: The loss of Energy, resulting from transporting power over the NYS Transmission System, between the Point of Injection and Point of Withdrawal of that Energy.

  • Customers are required to self-provide all Real Power Losses for non-Federal energy transmitted by Southwestern on behalf of such Customers under the provisions detailed below.

  • Real Power Losses are computed as four (4) percent of the total amount of non-Federal energy transmitted by Southwestern.


More Definitions of Real Power

Real Power means the power component required to do real work, which is measured in kiloWatts (kW); “Regulations” means the regulations made under the Ontario Energy Board Act or the Electricity Act;
Real Power means Energy produced at a specified rate and which can be measured in megawatts (“MW”) or kilowatts (“kW”).
Real Power means the power component required to perform real work, and is measured in kilowatts (kW);
Real Power means the power component that can be used to perform real work, measured in kiloWatts (kW).
Real Power means Real Power Holdings Limited, which through (1)
Real Power means the rate of producing, transferring, or using electrical energy, expressed in megawatts (“MW”). 45 “Regulated Generating Unit” is a generating unit listed in the Appendix to the Rate Schedules. Effective: August 1, 2008
Real Power means the portion of electricity that supplies energy to the load. Inclusions: I1 ‐ Transformers with the primary terminal and at least one secondary terminal operated at 100 kV or higher unless excluded under Exclusion E1 or E3.I2 ‐ Generating resource(s) with gross individual nameplate rating greater than 20 MVA or gross plant/facility aggregate nameplate rating greater than 75 MVA including the generator terminals through the high‐side of the step‐up transformer(s) connected at a voltage of 100 kV or above.I3 ‐ Blackstart Resources identified in the Transmission Operator’s restoration plan.I4 ‐ Dispersed power producing resources with aggregate capacity greater than 75 MVA (gross aggregate nameplate rating) utilizing a system designed primarily for aggregating capacity, connected at a common point at a voltage of 100 kV or above.I5 ‐ Static or dynamic devices (excluding generators) dedicated to supplying or absorbing Reactive Power that are connected at 100 kV or higher, or through a dedicated transformer with a high‐side voltage of 100 kV or higher, or through a transformer that is designated in Inclusion I1.Exclusions: E1 ‐ Radial systems: A group of contiguous transmission Elements that emanates from a single point of connection of 100 kV or higher and: