Reference plane definition

Reference plane means a plane which is displaced from and parallel to the tomographic plane.

Reference plane means a plane which parallel to and which can be offset (as specified in manufacturer information provided to users) from the location of the tomographic plane(s).

Reference plane means the plane passing through the points of contact of the heels of the manikin, used for the determination of the H point and the actual angle of torso for the seating position in motor vehicles.

Examples of Reference plane in a sentence

• The drawings are intended only to illustrate the essential dimensions (in mm) of the filament lamp 3/ M Figure 1 - Main drawing Reference axis Reference plane 1/ Reference axis 2/ Passing-beam Reference lug Maximum lamp outlines 4/ Figure 3 Figure 2 Reference plane Earth Asix of bulb 5/ Driving-beam 1/ The reference plane is the plane formed by the seating points of the three lugs of the cap ring.

• Reference plane First filament turn Reference axis Filament axis Figure 4 Metal free zone 8/ Reference plane Filament axis Bulb axis View A Figure 5 Permissible offset of filament axis 9/ (for standard filament lamps only) Figure 6 Bulb eccentricity 10/ Figure 3 Distortion free area 6/ and black top 7/ View B Filament axis Reference axis View A 6/ Glass bulb shall be optically distortion free within the angles γ1 and γ2.

• Dimension in mm Production light sources Standard light sources r (arc bending) 0.50 +/-0.25 0.50 +/-0.15 s (arc diffusion) 0.70 +/-0.25 0.70 +/-0.15 Category D8S Sheet D8S/1 The drawings are intended only to illustrate the essential dimensions (in mm) Figure 1 Reference plane 1 Category D8S - Cap PK32d-1 Reference axis2 Reference plane1 1 The reference plane is defined by the positions on the surface of the holder on which the three supporting bosses of the cap ring will rest.

• Categories H8 and H8B Sheet H8/2 Reference plane First filament turn Filament axis Reference axis Figure 4 - Metal free zone 8/ Filament axis Bulb axis e f Reference axis Figure 5 - Permissible offset of filament axis 9/ (for standard filament lamps only) Figure 6 - Bulb eccentricity 10/ Filament axis View A Figure 3 - Distorsion free area 6/ and black top 7/ View B Reference plane View A h1 h2 g g 6/ Glass bulb shall be optically distortion free within the angles 1 and 2.

• Reference plane First filament turn Reference axis Filament axis Figure 4 - Metal free zone 6/ Reference plane Filament axis Bulb axis Figure 6 - Bulb eccentricity 8/ Figure 5 Permissible offset of filament axis 7/ (for standard filament lamps only) Reference axis Filament axis View A Figure 3 - Distortion free area 5/ View B View A 5/ Glass bulb shall be optically distortion free within the angles 1 and 2.

More Definitions of Reference plane

Reference plane means a plane which is displaced from and parallel to the tomographic plane. “Scan” means the complete process of collecting X-ray transmission data for the production of a tomogram. Data can be collected simultaneously during a single scan for the production of one or more

Reference plane means the plane passing through the points of contact of the heels of the manikin, used for the determination of the H point and the actual angle of torso for the seating position of motor vehicles according to the prescriptions of Annex 4;

Reference plane means a construction plane parallel to the basic plane of the headform at a distance from it which is a function of the size of the headform;

Reference plane a plane defined with reference to the cap and to which certain dimensions of the gas-discharge light source are referred.

Reference plane means a horizontal plane passing through the centre of the front wheels or a horizontal plane situated at the height of 50 cm above the ground, whichever is lower. This plane is defined for the laden state of the vehicle;

Reference plane means a plane which is displaced from and parallel to the tomographic plane. "Remanufacturing" means modifying a CT system in such a way that the resulting dose and imaging performance become substantially equivalent to any CT x-ray system manufactured by the original

Reference plane means a plane which is displaced from and parallel to the tomographic plane. "Remanufacturing" means modifying a CT system in such a way that the resulting dose and imaging performance become substantially equivalent to any CT x-ray system manufactured by the originalmanufacturer on or after November 29, 1984. Any reference in this subsection to “manufacture,”