Reliability Test definition

Reliability Test means the reliability test to be conducted by the Contractor in accordance with Annex 3 to Part 6 – Specifications.

Reliability Test. The test to be carried out pursuant to Section 8.3(b), as described in Schedule 7.

Reliability Test means such test or tests as are provided for in the Contract, or as may be agreed upon, which shall be successfully completed as a pre-requisite to Taking Over.

Examples of Reliability Test in a sentence

• Seller may terminate the Reliability Test Cure Period at any time prior to the end of the Reliability Test Cure Period by Notice to Purchaser.

• The integrated energy system consists of the IEEE 24-bus Reliability Test System (RTS) (Grigg et al., 1999) and a 12-node natural gas system based on (He et al., 2017).

• If, at any moment during the test, it is evident that the availability of any specific WTG will not reach 98%, then the Reliability Test shall be considered as failed for that specific WTG.

• The Reliability Test will finish one hundred twenty (120) hours after commencement, provided that at least 60 hours the WTG has been operating at nominal capacity.

• Quinlivan, Suggestive Eyewitness Identification Procedures and the Supreme Court’s Reliability Test in Light of Eyewitness Science: 30 Years Later, 33 L.

More Definitions of Reliability Test

Reliability Test means the Performance Test described in Clauses 4.0 and 5.0 of this Appendix 4 to determine the EAF and EEAF.

Reliability Test has the meaning set forth in Section 6.7.8.

Reliability Test means a test of the reliability of the Facility conducted in accordance with the procedures developed pursuant to the guidelines set forth in Exhibit E-3 to demonstrate the availability of the Facility.

Reliability Test means the test described in Exhibit A to demonstrate and verify compliance of each Unit with the Reliability Guarantee.

Reliability Test. The reliability test described in Exhibit D.

Reliability Test. The test to be carried out pursuant to Section 8.3(b), as described in 9 To be deleted if HR is with the Seller. 10 To be deleted if HR is with the Seller. Schedule 7.

Reliability Test means a demonstration, certified by the Independent Engineer, made no later than June 30, 2001 over a 12 calendar month consecutive period that (i) the Delayed Coking Unit and Fluid Catalytic Cracking Unit were mechanically available for operation a minimum of 330 calendar days and that all other Refinery units were mechanically available for a minimum of 345 calendar days, and (ii) the following minimum cumulative throughputs were achieved: UNIT THOUSAND ---- BARRELS ------- Delayed Coking Unit.................. 18,500 Fluid Catalytic Cracking Unit........ 30,000 HDS Unit............................. 18,500