Retrofit Isolation Method definition

Retrofit Isolation Method. “RIM”, “RIM Approach” or “Retrofit Isolation Method Approach” is an M&V approach that verifies the Guaranteed Savings using techniques that isolate the Energy use of the ECM and affected systems separate from the Energy use of the rest of the Facility. This method is used to mitigate the interactive Energy effects of changes made to the Facility outside of Honeywell's control.
Sample 1Sample 2Sample 3
Retrofit Isolation Method. (if applicable to this Project) refers to energy audit methodologies that require pre-retrofit and post-retrofit measurements to isolate energy consumption and costs of specific facility equipment and systems impacted exclusively by this Agreement.
Sample 1Sample 2

Examples of Retrofit Isolation Method in a sentence

  • Upon contract execution, Customer accepts the standard methods that Honeywell uses to conduct Retrofit Isolation Method (RIM) and Option C Measurement & Verification (M&V), as well as cost avoidance calculations, as described herein and inferenced by or included in the energy calculations and regression models attached hereto.

  • In the Retrofit Isolation Method (RIM), the subsystem on which each CSM operates is isolated, and its utility use before and after implementation of the CSM is evaluated by physical measurement, whenever possible.

  • The challenges can be considered in light of a variety of intrinsic elements of the learning process, including the learners, infrastructures and instructors.

Related to Retrofit Isolation Method

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Multiple tomogram system means a computed tomography X-ray system which obtains X-ray transmission data simultaneously during a single scan to produce more than one tomogram.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Implementation Services means the supply, configuration and programming of Customer Equipment and/or Services and training where set out in an Order.

  • Custom Local Area Signaling Service Features (CLASS) means certain call-management service features that are currently available from SBC-13STATE’s local networks. These could include: Automatic Call Back; Automatic Recall; Call Trace; Caller Identification and related blocking features; Calling Number Delivery; Customer Originated Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • service delivery and budget implementation plan means a detailed plan approved by the executive mayor of the municipality, in terms of section 53(l) (c) (ii) of the MFMA, for implementing the municipality's delivery of municipal services and which indicate –

  • System Downtime means any interruption of access to the Hosting Web Site as measured by the System Availability Monitoring Mechanism. System Downtime specifically excludes: (a) any Scheduled Downtime; (b) inability to access the System resulting from failure in the internet backbone or networks not directly managed by NCR Voyix or its subcontractors or agents; (c) erroneous System monitoring, in which NCR Voyix establishes that the incorrect reporting of the inability to access the System was due to failure in the monitoring mechanism rather than a failure in the System; (d) an Extreme Service Interruption Event; or (e) any System Downtime caused by Customer.

  • Generation Service means the sale of electricity, including ancillary services such as the provision of reserves, to a Customer by a Competitive Supplier.

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Retrofit means to alter, improve, modify, remodel or renovate a building, facility or structure to make that building, facility or structure more energy-efficient.

  • Core Network means the transport infrastructure identified in accordance with Chapter III of Regulation (EU) No 1315/2013;

  • Bandwidth means a distributor’s defined tolerance used to flag data for further scrutiny at the stage in the VEE process where a current reading is compared to a reading from an equivalent historical billing period. For example, a 30 percent bandwidth means a current reading that is either 30 percent lower or 30 percent higher than the measurement from an equivalent historical billing period will be identified by the VEE process as requiring further scrutiny and verification;

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Support Service means an activity, such as information technology, accounting, human resources, legal, and other support functions that are required to support the ongoing delivery of core services.

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Design Criteria Professional means a firm who holds a current certificate of registration under Chapter 481 of the Florida Statutes, to practice architecture or landscape architecture, or a firm who holds a current certificate as a registered engineer under Chapter 471 of the Florida Statutes, to practice engineering, and who is employed by or under contract to the District to provide professional architect services, landscape architect services, or engineering services in connection with the preparation of the Design Criteria Package.

  • Municipal Separate Storm Sewer System Management Program or "MS4 Program" means a management program covering the duration of a state permit for a municipal separate storm sewer system that includes a comprehensive planning process that involves public participation and intergovernmental coordination, to reduce the discharge of pollutants to the maximum extent practicable, to protect water quality, and to satisfy the appropriate water quality requirements of the CWA and regulations and the Act and attendant regulations, using management practices, control techniques, and system, design and engineering methods, and such other provisions that are appropriate.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • BT Network means the communications network owned or leased by BT and used to provide a Service.

  • input service means any service used or intended to be used by a supplier in the course or furtherance of business;

  • Interconnection Service means the physical and electrical interconnection of the Customer Facility with the Transmission System pursuant to the terms of Tariff, Part IV and Tariff, Part VI and the Interconnection Service Agreement entered into pursuant thereto by Interconnection Customer, the Interconnected Transmission Owner and Transmission Provider.