Examples of Road load in a sentence
Road load matrix family The road load matrix family may be applied for vehicles designed for a technically permissible maximum laden mass ≥ 3,000 kg.
Road load matrix family The road load matrix family may be applied for vehicles designed forwith a technically permissible maximum laden mass ≥ 3,000 kg.
Road load coefficients and the test mass of test vehicle L and H may be taken from different road load families, as long as the difference between these road load families results from applying paragraph 6.8. of Annex 4, and the requirements in paragraph 2.3.2. of this annex are maintained.
In the case where no cut-off was imposed (or the temperature was so low at T = 106 K that the Figure 7.
Road load and dynamometer setting: For the vehicle to be tested, the chassis dynamometer load setting determined according to paragraph 8.1.4. or paragraph 8.2.3.3. of Annex 4 is to be applied.
Table A4/1 Permissible combinations of test vehicle selection and family requirementsRequirements to be fulfilled: (1) w/o interpolation method (2) Interpolation method w/o road load family (3) Applying the road load family (4) Interpolation method using one or more road load families Road load test vehicle Paragraph 4.2.1.1.1. of this annex.
July 17, 1992.86.229‑94 Road load force, test weight, and inertia weight class determination.
Road load means the power output required to move a given motor vehicle at curb weight plus 180 kilograms on level, clean, dry, smooth portland cement concrete pavement (or other surface with equivalent coeffi- cient of surface friction) at a specified speed through still air at 20 degrees Celsius, and standard barometric pres- sure (101.3 kilopascals) and includes driveline friction, rolling friction, and air resistance.S4.
For any terms not herein defined, the definition set out in UN UN GTR No. 15 shall apply.3.1. Road load and dynamometer setting3.1.1. “Technically permissible maximum laden mass” means the maximum mass allocated to a vehicle on the basis of its construction features and its design performances.3.1.2. “Fixed speed mode” means the operating mode of the dynamometer in which the dynamometer absorbs the power output of the vehicle so as to maintain the vehicle at a fixed dynamometer speed.
Parasitic vehicle losses Road load force The total force encountered by a vehicle because of motion on a level, smooth surface; it includes aerodynamic drag and mechanical drag (front and rear axle frictional and transmissions losses) as a function of vehicle speed.