Small diameter piping definition

Small diameter piping means integral piping with an internal diameter of three inches or less that is utilized for transporting regulated substances.

Examples of Small diameter piping in a sentence

  • Small diameter piping and socket weld locations particularly have been shown to be susceptible to high cycle fatigue.

  • These are important Figure 3A Top: Small diameter piping situations can require a different type of connection configuration.

Related to Small diameter piping

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • PAD means a Preauthorized Debit.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Loop Concentrator/Multiplexer or "LCM" is the Network Element that does one or more of the following: aggregates lower bit rate or bandwidth signals to higher bit rate or bandwidth signals (multiplexing); disaggregates higher bit rate or bandwidth signals to lower bit rate or bandwidth signals (demultiplexing); aggregates a specified number of signals or channels to fewer channels (concentrating); performs signal conversion, including encoding of signals (e.g., analog to digital and digital to analog signal conversion); or in some instances performs electrical to optical (E/O) conversion. LCM includes DLC, and D4 channel banks and may be located in Remote Terminals or Central Offices.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Outdoor cultivation means the cultivation of mature cannabis without the use of artificial lighting or light deprivation in the canopy area at any point in time. Artificial lighting is permissible only to maintain immature plants outside the canopy area.

  • Very high radiation area means an area, accessible to individuals, in which radiation levels from radiation sources external to the body could result in an individual receiving an absorbed dose in excess of 5 Gy (500 rad) in one hour at one meter from a source of radiation or one meter from any surface that the radiation penetrates.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Semiconductor cleanrooms means the integrated systems, fixtures, piping, partitions, flooring,

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Small Diversity business concern means a small business concern that is at least fifty-one (51) percent unconditionally owned by one or more individuals who are both socially and economically diverse, or a publicly owned business that has at least fifty-one (51) percent of its stock unconditionally owned by one or more socially and economically diverse individuals and that has its management and daily business controlled by one or more such individuals. This term also means a small business concern that is at least fifty-one (51) percent unconditionally owned by an economically diverse Indian tribe or Native Hawaiian Organization, or a publicly owned business that has at least fifty-one (51) percent of its stock unconditionally owned by one of these entities, that has its management and daily business controlled by members of an economically diverse Indian tribe or Native Hawaiian organization.

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • Pile means any non-containerized accumulation of solid, nonflowing hazardous waste that is used for treatment or storage and that is not a containment building.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Electrical Fitter means an employee who is mainly employed in the workshops manufacturing, fitting, and repairing electrical instruments, machines, and apparatus. Electrical fitting in this definition shall include armature and transformer winding, and people solely engaged in making and repairing instruments. The legitimate possession of a certificate of competency in this particular class of work issued by the Electrical Licensing Board under the Electricity Act 1994 shall be recognised as proof of efficiency.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.