Spray gun definition

Spray gun means a device that atomizes a coating or other material and projects the particulates or other material onto a substrate.
Sample 1Sample 2Sample 3
Spray gun means a device that uses air pressure or air flow to atomize a coating or other material, “Stripper” means a liquid that is applied to an aerospace vehicle or component to remove primer, topcoat, self- priming topcoat, or coating residue.
Sample 1Sample 2Sample 3
Spray gun means a device that:
Sample 1Sample 2Sample 3

Examples of Spray gun in a sentence

  • Spray gun equipment selection, set up, and operation, including measuring coating viscosity, selecting the proper fluid tip or nozzle, and achieving the proper spray pattern, air pressure and volume, and fluid delivery rate.

  • Spray gun cleaning may be done with, for example, hand cleaning of parts of the disassembled gun in a container of solvent, by flushing solvent through the gun without atomizing the solvent and paint residue, or by using a fully enclosed spray gun washer.

  • Spray gun cleaning may be done with, for example, by hand cleaning of parts of the disassembled gun in a container of solvent, by flushing solvent through the gun without atomizing the solvent and paint residue, or by using a fully enclosed spray gun washer.

  • Spray gun equipment selection, set up, and operation, including measuring paint viscosity, selecting the proper fluid tip or nozzle, and achieving the proper spray pattern, air pressure and volume, and fluid delivery rate.

  • Test equipment1.1. Spray gun The spray gun used shall be equipped with a nozzle 1.3 mm in diameter allowing a liquid flow rate of 0.24 ± 0.02 l/minute at an operating pressure of 6.0 bars -0/+0.5 bar.

  • Spray gun tip needle assemblies and orifices must be the proper size.Stencils and hand spray equipment must be used to paint word and symbol markings.

  • Spray Painting Spray gun application shall be used where indicated in the color scheme schedule.

  • Spray gun equipment selection, set up, and operation, including meas- uring coating viscosity, selecting the proper fluid tip or nozzle, and achiev- ing the proper spray pattern, air pres- sure and volume, and fluid delivery rate.

  • Trans- formers, powerpacks, control appa- ratus, and all other electrical portions of the equipment, with the exception of the handgun itself and its connections to the power supply shall be located outside of the spraying area or shall otherwise conform to the requirements of paragraph (c) of this section.(5) Spray gun ground.

  • Spray gun cleaning operations using cleaning solvent solutions that contain HAP and VOC below the de minimis levels specified in § 63.741(f) are exempt from the requirements in paragraphs (c)(1) through (c)(4) of this section.


More Definitions of Spray gun

Spray gun means a device that atomizes a coating or other material and projects the particulates or other material onto a substrate. {effective July 10, 2003}
Sample 1Sample 2Sample 3
Spray gun means a device that uses air pressure or air flow to atomize a coating or other material, and to project the atomized coating particulates or other material onto a component.
Sample 1Sample 2Sample 3
Spray gun means a device that uses air pressure or air flow to atomize a coating or other material,
Sample 1
Spray gun means any device that atomizes a coating or other material and projects the particulates or other material onto a substrate. Comment [A97]: Modeled on 40 CFR 63.742 and SJV Rule 4605 definitions. Industry requested clarification of debonding and unglueing provisions. In response, staff added text on stripping cured adhesives. Stripper material limits are in Rule 337.D.2.
Sample 1

Related to Spray gun

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Slug means any discharge of water, sewage, or industrial waste which in concentration of any given constituent or in quantity of flow exceeds for any period of duration longer than fifteen (15) minutes more than five (5) times the average twenty-four (24) hour concentration or flows during normal operation.

  • Biomethane means biogas that meets pipeline quality natural gas standards.

  • Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion."

  • Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Polystyrene foam means blown polystyrene and expanded and

  • Antidote means the most practical immediate treatment in case of poisoning and includes first aid treatment.

  • Riprap means small, broken stones or boulders placed compactly or irregularly on dykes or similar embankments for protection of earth surfaces against wave action or current;

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.

  • Epinephrine auto-injector means a device for immediate self-administration or administration by another trained person of a measured dose of epinephrine to a person at risk of anaphylaxis.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Biogas means gaseous fuels produced from biomass;

  • Spray buff product means a product designed to restore a worn floor finish in conjunction with a floor buffing machine and special pad.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Ash means all species of the genus Fraxinus.