Standard Cubic Feet definition

Standard Cubic Feet or “Scf” means, in relation to gas, the quantity of dry real gas, at a temperature of sixty (60) degrees Fahrenheit and an abolute pressure of fourteen decimal six nine six (14.696) pounds per square inch respectively.
Standard Cubic Feet or “SCF” means the quantity of gaseous material which, at a temperature of 60°F and a pressure of 14.73 psia occupies a volume of one cubic foot.
Standard Cubic Feet or "scf" means the quantity of gas which, when saturated with water vapor at a temperature of sixty degrees Fahrenheit (60°F) and an absolute pressure of 14.73 pounds per square inch, occupies 1 cubic foot; "Start-Up and Performance Tests" means the commissioning procedures and FSRU performance tests, including the Rxxxx Tests, in accordance with the program to be agreed in accordance with Schedule 4;

Examples of Standard Cubic Feet in a sentence

  • These include: • Single family residences • Multi-family residences, and • Small commercial entities consuming natural gas volumes not exceeding 1,000 Standard Cubic Feet per Hour In addition, a customer may request an EFV be installed on an existing service line at their own expense, based upon suitable payment arrangements agreed to by the Company.

  • The molecular weight of the metered stream of Carbon Dioxide, calculated from compositional analyses, shall be the basis for conversion of pound-mass measurement units to Standard Cubic Feet.

  • Measurement of Carbon Dioxide shall be determined on the basis of pound-mass quantities, which shall be converted to Standard Cubic Feet quantities.

  • For the purposes of measurement herein, the number of cubic feet measured at a nominal pressure of four (4) ounces above atmospheric pressure and without devices for correcting gas volumes for temperature and pressure variations shall be considered to be the number of Standard Cubic Feet measured under the conditions existing in a Customer's meter as and where installed.

  • Special units for GSV are allowed on the master side, but the device being polled (slave) cannot have special units set for density, otherwise the master will reject the base density and report an A115: No External Input or Polled Data Alert.ProcedureSet Gas Standard Volume Flow Unit to the unit you want to use.The default setting for Gas Standard Volume Flow Unit is SCFM (Standard Cubic Feet per Minute).

  • The Fox FT4X measures the mass flow of gases directly Thousand Standard Cubic Feet per Day (MSCFD), Normal Cubic Meters per Hour (NM3H), Kilogram per Hour (Kg/Hr), and other mass units without the need for pressure or temperature compensation.

  • While under PLC control and in Auto Mode, fan speed is controlled by a PLC PID loop algorithm that monitors fan air flow in units of Standard Cubic Feet per Minute (SCFM) and adjusts the speed command to the fan to achieve the targeted air flow as set on the Set Point screen.

  • From Table 10 shows natural gas production during 2007–2010 increased by an average of 2.3% from 2,805,540 MMSCF (Million Standard Cubic Feet) to 3,407,592 MMSCF.

  • As of the Effective Date, this Other Customer has an annual maximum LNG reception quantity equivalent to approximately one (1) billion Standard Cubic Feet per day.

  • This final rule makes changes to part 192 to expand this requirement to include new or replaced branched service lines servicing SFRs, multifamily residences, and small commercial entities consuming gas volumes not exceeding 1,000 Standard Cubic Feet per Hour (SCFH).


More Definitions of Standard Cubic Feet

Standard Cubic Feet means, in relation to natural gas, the quantity of dry ideal gas at a temperature of sixty (60) degrees Fahrenheit and a pressure of fourteen decimal six nine six (14.696) pounds per square inch absolute contained in a volume of one (1) cubic foot;

Related to Standard Cubic Feet

  • standard scale means the standard scale contained in section 55 of the Interpretation Act 2015 (of Tynwald)33;

  • Standard Cost means any cost computed with the use of preestablished measures.

  • Gross Standard Volume as herein used means volume corrected to a temperature of sixty degrees (60°) Fahrenheit, in accordance with the latest API/ASTM measurement standards, and at equilibrium vapor pressure.

  • Three-dimensional reference system means a system as described in Appendix 2 to this annex;

  • On-premise beer retailer means a beer retailer who is:

  • Standard Rate means, for any day, a rate per annum equal to the Bank's announced Prime Rate minus 0% per annum, and each change in the Standard Rate shall be effective on the date any change in the Prime Rate is publicly announced as being effective.

  • Standard Methods means the examination and analytical procedures set forth in the most recent edition of "Standard Methods for the Examination of Water and Wastewater" published jointly by the American Public Health Association, the American Water Works Association, and the Water Pollution Control Federation.

  • Lowest Achievable Emission Rate (LAER) means, for any source, the more stringent rate of emissions based on the following:

  • Working level month (WLM) means an exposure to 1 working level for 170 hours (2,000 working hours per year divided by 12 months per year is approximately equal to 170 hours per month).

  • Modular building retailer means any person who purchases or acquires a modular building from a

  • Standard Services means the standard Services referred to in Schedule 1 (Services) of this Framework Agreement;

  • Standard Turnover means the turnover achieved between the date of commencement of your business and the date of the damage, converted to the selected indemnity period.

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Standard Software means Software identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Standard Software.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • HICP Daily Inflation Reference Index means (A) in relation to the first day of any given month, the HICP Monthly Reference Index of the third month preceding such month, and (B) in relation to a day (D) (other than the first day) in any given month (M), the linear interpolation of the HICP Monthly Reference Index pertaining respectively to the third month preceding such month (M - 3) and the second month preceding such month (M - 2) calculated in accordance with the following formula:

  • Zero tolerance means Agency initiated activities, such as education and training, which are intended to prevent occurrences of abuse, neglect, exploitation, and abandonment involving persons with developmental disabilities and facilitate quicker identification and reporting of potentially harmful situations and environments in which abuse, neglect, exploitation, or abandonment may arise.

  • Lowest achievable emission rate (LAER) means for any source, that rate of emissions which reflects the most stringent emission limitation which is contained in the implementation plan of any State for such class or category of source, unless the owner or operator of the proposed source demonstrates that such limitations are not achievable, or the most stringent emission limitation which is achieved in practice by such class or category of source, whichever is more stringent. In no event shall the application of this term permit a proposed new or modified source to emit any pollutant in excess of the amount allowable under applicable New Source Standards of Performance.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • CPI Daily Inflation Reference Index means (A) in relation to the first day of any given month, the CPI Monthly Reference Index of the third month preceding such month, and (B) in relation to a day (D) (other than the first day) in any given month (M), the linear interpolation of the CPI Monthly Reference Index pertaining respectively to the third month preceding such month (M - 3) and the second month preceding such month (M - 2) calculated in accordance with the following formula:

  • Standard Materials means all Materials not specified as Custom Materials.

  • Basic generation service or "BGS" means electric generation

  • Top Level Domain means the portion of the Domain Name to the right of the right-most period. (In the example, “COM”.) “Second Level Domain” means that portion of a domain name to the left of the right-most period, up to the second period from the right, if any, plus the Top Level Domain. (In the example, “XXXXXXXXX.XXX”.) “Third Level Domain” means that portion of a domain name to the left of the second period from the right, if any, up to the third period from the right, if any, plus the Second Level Domain. (In the example, “XXXXXXXXX.XXXXXXXXX.XXX”.).

  • Value-added non-voice data service means a telecommunications service in which computer processing applications are used to act on the form, content, code, or protocol of the information or data primarily for a purpose other than transmission, conveyance, or routing.

  • Bid with Lowest Evaluated Cost means the bid quoting lowest cost amongst all those bids evaluated to be substantially responsive;

  • Day-ahead System Energy Price means the System Energy Price resulting from the Day- ahead Energy Market.