Standard test definition

Standard test. , as used in this chapter, means test conducted in accordance with the latest published standard adopted by the American Society for Testing and Materials.
Sample 1Sample 2Sample 3
Standard test means a test conducted in accordance with the latest published standard adopted by ASTM International.
Sample 1Sample 2Sample 3
Standard test as used in this chapter, means test
Sample 1

Examples of Standard test in a sentence

  • During the 2013-2014 school year, the Professional Development Committee completed a review and established the incorporation of student achievement and progress toward District –adopted and State-adopted standards, including the State-mandated California Standard Test CST program and its annual reported test results, District-adopted formative assessment (Measure of Academic Progress), and also to any future criterion-referenced State-mandated replacements or additions thereto.

  • School test proctors are then responsible to read and sign the Standard Test Administration and Testing Ethics Policy for Utah Educators brochure and document.

  • In addition, Xxxxx Solar warrants that for a period of twenty-five years commencing on the Warranty Start Date, the loss of power output relating to the initial guaranteed power which is defined as Peak Power Xxxxx Pmax(Wp) plus Peak Power Xxxxx Pmax(Wp) multiplied by the lower limit of the Power Output Tolerance Pmax(%)–as specified in the relevant Product Data Sheet and measured at Standard Test Conditions (STC) for the Product(s) shall not exceed  For Polycrystalline Products (as defined in Sec.

  • The power output values under this Limited Power Output Warranty shall be those measured under PANASONIC’S Standard Test Conditions (STC) as follows: (a) Irradiance 1000 W/m2, (b) Cell Temperature of 25ºC, and (c) Air Mass of 1.5g.

  • The ANSI rating of 75 falls under the ANSI Z75, Standard for Personal Protection Protective Footwear, which has been replaced by the new ASTM International standards, entitled F2412-05 Standard Test Methods for Foot Protection and F2413-05 Standard Requirements for Protective Footwear.

  • Geotechnical laboratory testing on select soil samples included water content determinations (ASTM D2216 Standard Test Methods for Laboratory Determination of Water Content of Soil and Rock by Mass), and particle-size analyses (ASTM D6913 Standard Test Method for Particle-Size Distribution of Soils Using Sieve Analysis).

  • The AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) Standard Test Methods, Petroleum Measurement Table 6.B.

  • Perform PDA tests in accordance with ASTM D 4945-89, Standard Test Method for High Strain Dynamic Testing of Piles and this scope of work.

  • All work shall be performed in accordance with IEEE Std 112-2017 IEEE Standard Test Procedure for Polyphase Induction Motors and Generators and NEMA MG1-2016 unless otherwise noted below.

  • The Standard Test Conditions include the following: Atmosphere mass (AM) 1.5, wind speed=0m/s, irradiation 1000W/m2, cell temperature 25℃.


More Definitions of Standard test

Standard test means a driving test which is a weekday test (excluding bank holidays) between the hours of 07:00 to 16:29.
Sample 1

Related to Standard test

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Standard Turnover means the turnover achieved between the date of commencement of your business and the date of the damage, converted to the selected indemnity period.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Stand-Alone Test Environment or "SATE" shall have the meaning set forth in Section 12.2.9.3.2.

  • Peak-Hour Dispatch means, for purposes of calculating the Energy and Ancillary Services Revenue Offset under Tariff, Attachment DD, section 5, an assumption, as more fully set forth in the PJM Manuals, that the Reference Resource is committed in the Day-Ahead Energy Market in four distinct blocks of four hours of continuous output for each block from the peak-hour period beginning with the hour ending 0800 EPT through to the hour ending 2300 EPT for any day when the average day-ahead LMP for the area for which the Net Cost of New Entry is being determined is greater than, or equal to, the cost to generate (including the cost for a complete start and shutdown cycle) for at least two hours during each four-hour block, where such blocks shall be assumed to be committed independently; provided that, if there are not at least two economic hours in any given four-hour block, then the Reference Resource shall be assumed not to be committed for such block; and to the extent not committed in any such block in the Day- Ahead Energy Market under the above conditions based on Day-Ahead LMPs, is dispatched in the Real-Time Energy Market for such block if the Real-Time LMP is greater than or equal to the cost to generate under the same conditions as described above for the Day-Ahead Energy Market. Peak Market Activity:

  • voltage ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Genetic test means an analysis of human DNA, RNA, chromosomes, proteins, or metabolites, that detect genotypes, mutations, or chromosomal changes. The term “genetic test” does not mean an analysis of proteins or metabolites that does not detect genotypes, mutations, or chromosomal changes; or an analysis of proteins or metabolites that is directly related to a manifested disease, disorder, or pathological condition that could reasonably be detected by a health care professional with appropriate training and expertise in the field of medicine involved.

  • Confirmation test means a drug or alcohol test on a sample to substantiate the results of a prior drug or alcohol test on the same sample and which uses different chemical principles and is of equal or greater accuracy than the prior drug or alcohol test;

  • Monthly Remittance Condition has the meaning set forth in Section 4.2 of the Sale and Servicing Agreement.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Plant Test Date or "PTD" means the date acceptance testing is performed with CLEC. "Point of Interface", "Point of Interconnection," or "POI" is a demarcation between the networks of two (2) LECs (including a LEC and CLEC). The POI is that point where the exchange of traffic takes place.

  • LCT Test Date shall have the meaning provided in Section 1.12(b).

  • Asset Test means, for an Asset Review, each Test, as defined in the Asset Representations Review Agreement, in Schedule A to the Asset Representations Review Agreement to be performed by the Asset Representations Reviewer on the related Asset Review Receivables.