Standards & Specifications definition

Standards & Specifications means the Virginia Community College System’s Annual Standards and Specifications for Erosion & Sediment Control and Stormwater Management.
Sample 1Sample 2Sample 3
Standards & Specifications means the Virginia Natural Gas’s Annual Standards and Specifications for Erosion & Sediment Control and Stormwater Management.
Sample 1
Standards & Specifications means the Longwood University’s Annual Standards and Specifications for Erosion & Sediment Control and Stormwater Management.
Sample 1

Examples of Standards & Specifications in a sentence

  • Equipment and material shall comply with the Charles County Government Department of Planning & Growth Management Standards & Specifications for Construction.

  • See 10.1-24 B.(2) for Multifamily limits (F.) General Standards & Specifications: (1.) Building placement, parking placement, building type, urban form, access, and lot arrangement shall be controlled by the lot and building type standards (Article 9) for the lot and building types listed in the Traditional Neighborhood Development Overlay District and by the standards set forth in section 8.5-1.(F) below.

  • For stormwater facilities such as ponds or xxxxxx, refer to the Stormwater Facilities Section of these Standards & Specifications.

  • Full materials specifications will be found in the District Standards & Specifications for Water & Wastewater Construction.

  • When applicable, Bidders should refer to the Standards & Specifications, General Conditions, and General Notices, Notes & Information for further details and information.

  • Acceptable plans are considered to be plans that are prepared in the format and to the level of detail prescribed in INDOT’s Plan Development Manual and conforming to INDOT’s Traffic Design Manual, Manual of Uniform Traffic Control Devices, INDOT’s Standards & Specifications, and AASHTO’s Standard Specifications for Structural Supports for Highway Signs, Luminaries and Traffic Signals Manual.

  • The EPSC Plan, developed using a combination of structural, non-structural, and vegetative practices to adequately prevent erosion and control sedimentation, and meeting the requirements of the VTrans Erosion Prevention & Sediment Control Plan Designer Checklist (Non-Jurisdictional and Low Risk) or the Vermont Standards & Specifications for Erosion Prevention & Sediment Control based on area of disturbance and risk, has been included in the Contract Documents.

  • All dedicated streets shall conform to the Comprehensive Plan and Street Design Criteria as found in the Design Standards & Specifications.

  • PHMSA reviewed Enterprise Engineering Standards & Specifications, STD.7002, Protective Coatings - Below Ground Steel Surfaces-Field Applied, Sec.

  • The City will inspect public right-of-way and utility connection work to ensure that construction is performed in accordance with the approved plans and specifications and/or according to the City’s Standards & Specifications.


More Definitions of Standards & Specifications

Standards & Specifications means the MMI’s Annual Standards and Specifications for Erosion & Sediment Control and Stormwater Management.
Sample 1
Standards & Specifications means the Virginia Community College System’s Annual Standards and
Sample 1
Standards & Specifications means the Virginia Commonwealth University’s Annual Standards and Specifications for Erosion & Sediment Control and Stormwater Management.
Sample 1

Related to Standards & Specifications

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • IS Specification means the Specification of latest edition with amendments, if any, up to time of receipt of tender by Corporation issued by the Bureau of Indian Standards as referred to in the specifications and / or work orders.

  • Goods Specification means any specification for the Goods, including any related plans and drawings that is set out in the Purchase Order or otherwise agreed in writing by the Customer and the Supplier;

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time. The Contract Specifications appear on the Website.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • The Specification means the Specification annexed to or issued with G.T.C.C. and shall include the schedules & drawings attached thereto as well as all samples and pattern, if any.

  • Service Specifications means the following documents, as applicable to the Services under Your order: (a) the Oracle Cloud Hosting and Delivery Policies, the Program Documentation, the Oracle service descriptions, and the Data Processing Agreement described in this Schedule C; (b) Oracle’s privacy policies; and (c) any other Oracle documents that are referenced in or incorporated into Your order. The following do not apply to any non-Cloud Oracle service offerings acquired in Your order, such as professional services: the Oracle Cloud Hosting and Delivery Policies, Program Documentation, and the Data Processing Agreement. The following do not apply to any Oracle Software: the Oracle Cloud Hosting and Delivery Policies, Oracle service descriptions, and the Data Processing Agreement.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Class specification means a formal written statement of the class which defines the general character and scope of the duties and responsibilities of positions in the class, lists typical or illustrative examples of work of positions in the class, enumerates the knowledges, skills, and abilities required for successful performance of the work and states required minimum experience and training for positions in the class.

  • TENDER SPECIFICATIONS means the Scope of Work, Special Instructions / Conditions, Technical specifications/requirement , Appendices, Site Information and drawings pertaining to the work and any other relevant reference in the Tender Document for which the Bidder are required to submit their offer.

  • Product Specifications means the specifications, features and/or terms of any "Contract" (as defined in the LME Rules) listed for trading on the LME, as described in the LME Rules;

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Product Specification means a product specification for a Medical Device set out in Schedule 2;

  • Specifications means the Specifications of the Works included in the Contract and any modification or addition made or approved by the Project Manager.

  • Brand Name Specification means a specification limited to one or more items by manufacturers’ names or catalogue number.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • TENDER SPECIFICATION means “Specific conditions, technical specifications, appendices, site information and drawing pertaining to the work in which the tenderers are required to submit their offer. Individual specification number will be assigned to each tender specification.

  • District Specifications means the specifications followed by the State Government in the area where the work is to be executed.

  • Swap Specification means, with respect to any Swap, the Rules or other trading protocols containing specifications for such Swap, as adopted, amended, supplemented or otherwise modified from time to time by BSEF.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”