Steam Measuring Point definition

Steam Measuring Point is a location to be designated by the Parties in good faith, and which is to be located at or in reasonable proximity to the Steam Delivery Point.
Sample 1Sample 2Sample 3

Examples of Steam Measuring Point in a sentence

  • When the Provider Steam Flow Meter and Provider Steam Instruments are operating as designed, their respective measurements will be used to determine the quantity of all corresponding Steam delivered to the Steam Measuring Point.

  • Provider shall install (i) one (1) meter at the Steam Measuring Point, which shall be utilized to continuously measure Steam flow (the “Provider Steam Flow Meter”, and (ii) one (1) pressure and one (1) temperature instrument at the Steam Measurement Point (to compensate the Steam measurement), which shall continuously measure Steam temperature and pressure (each, a “Provider Steam Instrument” and, collectively, the “Provider Steam Instruments”).

  • When either of the redundant Provider Steam Monitoring Equipment is operating as designed, the corresponding measurements will be used to measure the Steam Constituents of all corresponding Steam delivered to the Steam Measuring Point.

Related to Steam Measuring Point

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Vehicle measuring attitude means the position of the vehicle as defined by the co-ordinates of fiducial marks in the three-dimensional reference system.

  • Hand or measuring tools means those tools listed in Federal supply classifications 51 and 52, respectively.

  • Corrective Measure The contractor shall repair any deficiencies to meet the performance guideline within warranty period.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • COVID-19 Measures means any quarantine, “shelter in place”, “stay at home”, workforce reduction, social distancing, shut down, closure or sequester order, guideline, recommendation or Law, or any other applicable Laws, guidelines or recommendations by any Governmental Entity in connection with or in response to COVID-19.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • Net metering period means the 12-month period following the date of final interconnection of the

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Routing Point means the location which a LEC has designated on its own network as the homing or routing point for traffic inbound to Exchange Service provided by the LEC which bears a certain NPA-NXX designation. The Routing Point is employed to calculate mileage measurements for the distance-sensitive transport element charges of Switched Access services. The Routing Point need not be the same as the Rating Point, nor must it be located within the Rate Center area, but must be in the same LATA as the NPA-NXX.

  • Energy Use Intensity (EUI means the kBTUs (1,000 British Thermal Units) used per square foot of gross floor area.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Three-dimensional reference system means a system as described in Appendix 2 to this annex;

  • Dyed diesel fuel means diesel fuel that meets the dyeing and marking requirements of 26 U.S.C.

  • Net metering system means a facility for the production of electrical energy that does all of the following:

  • Supply Point means the point of connection between the licensed network and your apparatus or equipment.