Examples of Stoddard solvent in a sentence
Stoddard solvent OSHA PEL PEL 500 ppm 2,900 mg/m3 ; ACGIH TLVTWA value 100 ppm ; Advice on system design:Provide adequate exhaust ventilation to control work place concentrations.
An estimated value for Stoddard solvent was quantified based on a 3‐point calibration performed after the initial analysis under NWTPH‐Dx. 3 The MTCA Method A mineral oil criterion was used as a surrogate for Stoddard solvent.4 World Health Organization 2005 Toxic Equivalency Factors was used for calculation of dioxin/furan TEQ (Van den Berg, et al.
In addition, add the amount of Stoddard solvent needed to fill the entire fuel system from the fuel tank through the engine’s induction system.
Then, add Stoddard solvent to the test vehicle’s fuel tank in an amount which is equal to not less than 92 and not more than 94 percent of the fuel tank’s usable capacity stated by the vehicle’s manufacturer.
Stoddard solvent OSHA PEL PEL 500 ppm 2,900 mg/m3 ; TWA value 100 ppm 525 mg/m3 ; ACGIH TLVTWA value 100 ppm ; Advice on system design:Provide adequate exhaust ventilation to control work place concentrations.
Using crocus cloth or fine abrasive cloth and mineral spirits or Stoddard solvent, clean the outer band of the v-band coupling.
Conditioning may beaccomplished by: (1) allowing wood to dry at ambient temperatures; (2) kilndrying; (3) steaming the wood, then applying a vacuum; (4) dipping thewood in a heated salt bath; or (5) vapor drying, and immersing the wood in a solvent (usually naphtha or Stoddard solvent).
Stoddard solvent OSHA PEL ACGIH TLV PEL 500 ppm 2,900 mg/m3 ; TWA value 100 ppm ; Advice on system design:Provide adequate exhaust ventilation to control work place concentrations.
Many hydrocarbon solvents (e.g., mineral spirits and Stoddard solvent) are complex combinations of two major classes of hydrocarbon compounds: aliphatic hydrocarbons (paraffins and cyclo- paraffins) and aromatic hydrocarbons.
Before using a container, rinse it with Stoddard solvent or other naphtha of similar volatility.