Suspension for Convenience definition

Suspension for Convenience means any extension, suspension, or delay of Contractor’s performance of the Work for Buyer’s convenience.
Suspension for Convenience means any extension, suspension, or delay of Contractor’s performance of the Work for
Suspension for Convenience shall have the meaning given in Clause 23.1 (Suspension by Lessee).

Examples of Suspension for Convenience in a sentence

  • If the Losses incurred by City exceed the amount payable, Contractor shall be liable to City for the difference and shall promptly remit same to City.‌ 15.4 Suspension by City 15.4.1 Suspension for Convenience.

  • If the Losses incurred by City exceed the amount payable, Contractor shall be liable to City for the difference and shall promptly remit same to City.‌‌ 15.4 Suspension by City 15.4.1 Suspension for Convenience.

  • Suspension for Convenience: The Owner, for its own convenience, may suspend the contract in whole or in part at any time by written notice to the Trade Contractor.

  • This compensation will deprive the Contractor of its right to claim for a compensation for termination for convenience in accordance with Article 36.2 if the Suspension for Convenience were to turn into a termination for convenience.

  • In the event of termination or suspension pursuant to this Paragraph, the Design Professional shall have the rights and obligations set forth in Paragraph 13.2, Suspension for Convenience and Xxxxxxxxx 00.0, Xxxxxxxxxxx for Convenience.

  • The TSO may suspend the performance of the Contract and/or the PO, in whole or in part, for the duration that it so determines at any time and without being obliged to provide justification (Suspension for Convenience).

  • Termination or Suspension for Convenience Except as otherwise provided in this Contract, the Agency may, by ten (10) days’ written notice, beginning on the second day after mailing, suspend or terminate this Contract, in whole or in part.

  • FPL Suspension for Convenience shall be addressed in accordance with the MSA.

  • In the event of termination or suspension pursuant to this Paragraph, the Program Manager shall have the rights and obligations set forth in Paragraph 13.2, Suspension for Convenience and Paragraph 14.1, Termination for Convenience.

  • In the event of termination or suspension pursuant to this Paragraph, the Architectural Designer shall have the rights and obligations set forth in Paragraph 13.2, Suspension for Convenience and Paragraph 14.1, Termination for Convenience.


More Definitions of Suspension for Convenience

Suspension for Convenience means any extension, suspension, or delay of Contractor’s performance of the Work for Xxxxx’s convenience.
Suspension for Convenience means extension, suspension, or delay of Contractor’s performance of the Work for Buyer’s convenience.

Related to Suspension for Convenience

  • Termination for Convenience means the termination of the Trade Contract Agreement or the Trade Contractor Work by the Authority without cause and for the convenience of the Authority as decided in its sole discretion.

  • Request for Qualifications means all materials and

  • Qualifying Transmission Upgrade means a proposed enhancement or addition to the Transmission System that: (a) will increase the Capacity Emergency Transfer Limit into an LDA by a megawatt quantity certified by the Office of the Interconnection; (b) the Office of the Interconnection has determined will be in service on or before the commencement of the first Delivery Year for which such upgrade is the subject of a Sell Offer in the Base Residual Auction; (c) is the subject of a Facilities Study Agreement executed before the conduct of the Base Residual Auction for such Delivery Year and (d) a New Service Customer is obligated to fund through a rate or charge specific to such facility or upgrade.

  • Time for Completion means the time for completing the Works as stated in the Contract Data (or as extended under Sub-Clause 7.3), calculated from the Commencement Date.

  • Terms of Service means those Support Services and Professional Services terms posted at xxxxx://xxx.xxxxxxx.xxx/jaggaer-one-terms-of-service/, which are incorporated herein. Client acknowledges and agrees it has read, understands and agrees to be bound by the Terms of Service.

  • Termination Warning Notice means a notice sent by the Secretary of State to the Academy Trust, stating his intention to terminate this Agreement.

  • Firm Transmission Feasibility Study means a study conducted by the Transmission Provider in accordance with Tariff, Part II, section 19.3 and Tariff, Part III, section 32.3.

  • Long Form Notice means the form of notice that shall be posted on the Settlement website created by the Settlement Administrator and shall be available to Settlement Class members by mail on request made to the Settlement Administrator in the form attached as Exhibit 2.

  • Notice of Special Rate Period means any notice with respect to a Special Rate Period of shares of MuniPreferred pursuant to subparagraph (d)(i) of Section 4 of Part I of this Statement.

  • Cost-effectiveness means the ability of a particular product or service to efficiently provide goods or services to the State. In determining the cost effectiveness of a particular product or service, the appropriate chief procurement officer shall list the relevant factors in the bid notice or solicitation and use only those listed relevant factors in determining the award.

  • Locational Deliverability Area Reliability Requirement means the projected internal capacity in the Locational Deliverability Area plus the Capacity Emergency Transfer Objective for the Delivery Year, as determined by the Office of the Interconnection in connection with preparation of the Regional Transmission Expansion Plan, less the minimum internal resources required for all FRR Entities in such Locational Deliverability Area.

  • Limited Demand Resource Reliability Target for the PJM Region or an LDA, shall mean the maximum amount of Limited Demand Resources determined by PJM to be consistent with the maintenance of reliability, stated in Unforced Capacity that shall be used to calculate the Minimum Extended Summer Demand Resource Requirement for Delivery Years through May 31, 2017 and the Limited Resource Constraint for the 2017/2018 and 2018/2019 Delivery Years for the PJM Region or such LDA. As more fully set forth in the PJM Manuals, PJM calculates the Limited Demand Resource Reliability Target by first: i) testing the effects of the ten- interruption requirement by comparing possible loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using the cumulative capacity distributions employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) more than ten times over those peak days; ii) testing the six-hour duration requirement by calculating the MW difference between the highest hourly unrestricted peak load and seventh highest hourly unrestricted peak load on certain high peak load days (e.g., the annual peak, loads above the weather normalized peak, or days where load management was called) in recent years, then dividing those loads by the forecast peak for those years and averaging the result; and (iii) (for the 2016/2017 and 2017/2018 Delivery Years) testing the effects of the six-hour duration requirement by comparing possible hourly loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using a Monte Carlo model of hourly capacity levels that is consistent with the capacity model employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) for more than six hours over any one or more of the tested peak days. Second, PJM adopts the lowest result from these three tests as the Limited Demand Resource Reliability Target. The Limited Demand Resource Reliability Target shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the DR Factor] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].

  • Other forms of discipline means actions used in response to problem behaviors and behavioral violations, other than classroom exclusion, suspension, expulsion, or emergency expulsion, which may involve the use of best practices and strategies included in the state menu for behavior developed under RCW 28A.165.035.

  • Specific Redemption Provisions means, with respect to a Special Dividend Period either, or any combination of, (i) a period (a "Non-Call Period") determined by the Board of Directors of the Corporation, after consultation with the Auction Agent and the Broker-Dealers, during which the shares of AMPS subject to such Dividend Period shall not be subject to redemption at the option of the Corporation and (ii) a period (a "Premium Call Period"), consisting of a number of whole years and determined by the Board of Directors of the Corporation, after consultation with the Auction Agent and the Broker-Dealers, during each year of which the shares of AMPS subject to such Dividend Period shall be redeemable at the Corporation's option at a price per share equal to $25,000 plus accumulated but unpaid dividends plus a premium expressed as a percentage of $25,000, as determined by the Board of Directors of the Corporation after consultation with the Auction Agent and the Broker-Dealers.

  • Warning Notice means a notice in writing by the Secretary of State to the Academy Trust requiring the Academy Trust to procure the admission of a sufficient number of pupils by such date as he deems appropriate in the circumstances and setting out the consequences of not procuring the admission of a sufficient number of pupils by the date specified in such Warning Notice. 91D) If at any time after signing this Agreement, the Parties agree that by virtue of low pupil numbers the Academy is not financially viable, then the Parties jointly may terminate this Agreement having agreed first the precise terms of termination.

  • Request for Quotation (RFQ means the solicitation document issued by the DFMDC to potential bidders for the purchase of equipment, supplies, and/or services as described in the document. The definition includes these Terms and Conditions as well as all Pricing Pages, Exhibits, Attachments, and Amendments thereto.

  • Notice of Withdrawal means a notice containing the information set out in Schedule VII;

  • Expedited Deliverability Study means a deliverability study that an eligible Developer may elect to pursue as that term is defined in OATT Section 25 (OATT Attachment S) that may determine the extent to which an existing or proposed facility satisfies the NYISO Deliverability Interconnection Standard at its requested CRIS level without the need for System Deliverability Upgrades. The schedule and scope of the study is defined in Sections 25.5.9.2.1 and 25.7.1.2 of this Attachment S.

  • Request for Quote (RFQ means the solicitation document issued by OA/FMDC to potential vendors for the purchase of equipment, supplies, and/or services as described in the document. The definition includes these Terms and Conditions as well as all Pricing Pages, Exhibits, Attachments, and Addendums thereto.

  • Terms-of-service agreement means an agreement that controls the relationship between a user and a custodian.

  • Separate Terms refers to separate license terms that are specified in the Program Documentation, Service Specifications, readme or notice files and that apply to Separately Licensed Third Party Technology.

  • Cost-effective means that the expenditures pursuant to

  • Single-service articles means cups, containers, lids, closures, plates, knives, forks, spoons, stirrers, paddles, straws, napkins, wrapping materials, toothpicks, and similar articles intended for one-time, one-person use and then discarded.

  • Form of Agreement means the form of agreement contained in Part D of the RFP;

  • freezing of funds means preventing any move, transfer, alteration, use of, access to, or dealing with funds in any way that would result in any change in their volume, amount, location, ownership, possession, character, destination or other change that would enable the funds to be used, including portfolio management;

  • 13 Interest Rate Agreements"..............................................................13 "Inventory Facility"....................................................................14 "Investment"............................................................................14 "Issue Date"............................................................................14 "Lien"..................................................................................14 "Liquidated Damages"....................................................................14 "Manufacturer"..........................................................................15 "Maturity"..............................................................................15 "Moody's"...............................................................................15 "Net Cash Proceeds".....................................................................15 "Non-U.S. Person".......................................................................16 "Officers' Certificate".................................................................16 "Opinion of Counsel"....................................................................16 "Opinion of Independent Counsel"........................................................16 "Outstanding"...........................................................................16 "Pari Passu Indebtedness"...............................................................17 "Paying Agent"..........................................................................17 "Permitted Guarantor Junior Payment"....................................................17 "Permitted Holders".....................................................................17 "Permitted Investment"..................................................................18 "Permitted Junior Payment"..............................................................19 "Permitted Subsidiary Preferred Stock"..................................................19 "Person"................................................................................19 "