Tender Capacity definition

Tender Capacity means, in respect of an Option, the amount in kWh per Day (being a quantity not a rate) of System Entry Capacity as is specified as such in the Tender Offer and Tender Acceptance relating to that Option;
Sample 1Sample 2Sample 3
Tender Capacity means the sum total capacity of all the projects that will be allocated to the successful Developers i.e. 25MWp.
Sample 1
Tender Capacity means, in respect of a Forward, the amount in kWh per Day (being a quantity not a rate) of NTS Entry Capacity as is specified as such in the Tender Offer and Tender Acceptance relating to that Forward;
Sample 1

Examples of Tender Capacity in a sentence

  • The selection process shall stand completed once the Tender Capacity has been achieved through the summation of the capacity offered by the Successful Bidders.

  • SECTION 3: QUALIFICATION INFORMATION The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender Capacity as provided for in Clause 3 of the Instructions to Tenderers.

  • At any step during the selection of Successful Bidder(s) in accordance with the provision laid down in RFP, the TPCODL reserves the right to increase/decrease the Tender Capacity of the capacity indicated to achieve the balance Tender Capacity and select the Successful Bidder with the lowest Project Cost/ lowest evaluated price amongst the remaining Bids.

  • Tender Capacity / Bank solvency certificate from their banker showing capability of handling the projects.8. Table of contents with page no.9. Tender purchased receipt/Document.10.

  • National Grid shall, subject to the exercise in whole or in part of that Option, be entitled to receive from the Tendering User in the Option Exercise Period (in respect of such number of Days not exceeding the number of Permitted Exercise Days) a surrender of System Entry Capacity of an amount not exceeding the Tender Capacity for each such Day at the Strike Price and at the Aggregate System Entry Point, in each case as specified in the Tender Offer and the Tender Acceptance relating to that Option.

  • In addition, the State Government in its circular and guidelines (December 2002 and October 2008) had laid down the method of calculation of Assessed Available Tender Capacity which involved value of completed works, existing commitments and ongoing works.

  • The available tender capacity will be calculated as under: Assessed Available Tender Capacity = (A*N*2-B), where A = Maximum value of works related to processing of solid waste/biomining of legacy waste at dumpsites/city compost plants executed in any one financial year during the last five years (updated to current price level).

  • IPGCL shall allocate the capacity until the Tender Capacity is fulfilled.5.3.4.4 All the qualified bidders except the L1 bidder will be given 7 days from the date of notification of discovered Price on IPGCL website (www.ipgcl-ppcl.gov.in) to give their consent to execute the work at L1 subsidy amount, failing which it will be assumed that they are not interested to match L1 subsidy amount and their capacity shall be allocated to the other successful bidder(s) who wish to match the same.

  • The minimum tender capacity shall be Tk. 6.50 (Six point Five Zero) crore.To Calculate Tender Capacity, the Tenderer must be submitted list of on-going works under any public sector and existing commitment must be mentioned.

  • SL.No.EquipmentNo. Tenderers who meet the above specified minimum Qualifying Criteria, will only be qualified, if their available Tender Capacity is more than the total Tender Value.

Related to Tender Capacity

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Excess Capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • firm capacity means Natural Gas transmission Capacity contractually guaranteed as uninterruptible by the TSO according to this Agreement.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.