Topsides Scope definition

Topsides Scope means the scope of work of the Sub-Contractor as stated in Appendix 2 ;
Sample 1Sample 2Sample 3
Topsides Scope means the scope of work of the Sub-Contractor as stated in Appendix 2 (The GIMI Topsides Agreement); "Unit Area" means [*****]; "Upstream Facilities" means [*****]; "UUOA" means [*****]; "Variations" means any variation or modification to the Works (including the methodology for executing the Works, as contemplated by Article 14 (Variations); "Variation Cost" shall have the meaning given to it in Article 14.25 (Variation Cost); "Variation Order" means the document issued in the form set out in Appendix 16 in accordance with Article 14 (Variations); "Variation Order Proposal" means the document issued in the form set out in Appendix 17 in accordance with Article 14 (Variations); 15 "Variation Request" shall have the meaning given to it in Article 14.1 (Variation Request); "Vessel" shall have the meaning given to it in the Recitals to this Agreement; "Vessel Leaving The Yard" shall have the meaning given to it in Article 21.1 (Vessel Leaving the Yard); "Warranty Period" shall have the meaning given to it in Article 36.1 (Warranty); "Works" means works to be carried out by the Contractor pursuant to this Agreement; and "Yard" means any of the shipyards occupied or operated by the Contractor or the Contractor's Affiliates in Singapore.
Sample 1

Examples of Topsides Scope in a sentence

  • Further, the Contractor shall have no obligation to the Owner in respect of the performance of the Topsides Scope in any Performance Tests or otherwise.

  • The Contractor shall take reasonably practicable steps to avoid or minimise any delay to Redelivery which might otherwise result from the Sub-Contractor’s performance of the Topsides Scope, provided that the cost to the Contractor of doing so shall not exceed the amount received by the Contractor from the Sub-Contractor in respect of such delay by the Sub-Contractor pursuant to Clause 33.2 of the GANDRIA Topsides Agreement.

  • The Contractor shall take reasonably practicable steps to avoid or minimise any delay to Redelivery which might otherwise result from the Sub-Contractor’s performance of the Topsides Scope, provided that the cost to the Contractor of doing so shall not exceed the amount received by the Contractor from the Sub-Contractor in respect of such delay by the Sub-Contractor pursuant to Clause 33.2 of the GIMI Topsides Agreement.

  • The Contractor shall take reasonably practicable steps to avoid or minimise any delay to Redelivery which might otherwise result from the Sub-Contractor’s performance of the Topsides Scope, provided that the cost to the Contractor of doing so shall not exceed the amount received by the Contractor from the Sub-Contractor in respect of such delay by the Sub-Contractor pursuant to Clause 31.2 of the Topsides Agreement.

Related to Topsides Scope

  • Project Scope means the description or activity of work to be accomplished on the project.

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.

  • Payload means all property to be flown or used on or in a Launch Vehicle.

  • Hydraulic conductivity means the quantity of water that will flow through a unit cross-sectional area of a porous material per unit of time under a hydraulic gradient of 1.0;

  • Mobile crisis outreach team means a crisis intervention service for minors or families of minors experiencing behavioral health or psychiatric emergencies.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Screening means the evaluation process used to identify an individual's ability to perform activities of daily living and address health and safety concerns.

  • SAP Training Catalogue means the catalogue published by SAP containing details of SAP training courses and services.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • E-Verify system means an Internet-based system operated by the United States Department of Homeland Security that allows participating employers to electronically verify the employment eligibility of newly hired employees; and

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • QA means Quality Assurance.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Customization means any customer-specific modification to software that requires changes to the software’s source code.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Anaerobic digestion ’ means a controlled process involving microbial decomposition of organic matter in the absence of oxygen ;

  • Core Network means the transport infrastructure identified in accordance with Chapter III of Regulation (EU) No 1315/2013;

  • HIV means human immunodeficiency virus.

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Digital Signal Level 0 or "DS0" means the 64 Kbps zero-level signal in the time-division multiplex hierarchy.

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Isolation means a behavior management technique in which a student is placed alone in an enclosed space from which the student is not prevented from leaving.

  • Subsystem means any subset of the System identified as such in the Contract that may be supplied, installed, tested, and commissioned individually before Commissioning of the entire System.