Total suspended solids load definition

Total suspended solids load means the total weight of material, including sediment and other solids, that is assumed to be carried in the runoff water and discharged from the site based on runoff models for urban lands. For best management practice design purposes, a 5 micron particle size is usually selected as a target to achieve 80% total suspended solids removal rate, as required in sec. 11.1008(1)(a)3. of this ordinance.
View Source

Related to Total suspended solids load

  • Total Suspended Solids means measure of all suspended solids in a liquid; typically expressed in mg/L.

  • Suspended Solids means solids that either float on the surface of, or are in suspension in water, sewage, or other liquids, and which are removable by laboratory filtering.

  • Total suspended particulate means particulate matter as measured by the method described in 40 CFR 50, Appendix B.

  • Suspended Lines means subscriber lines that have been temporarily disconnected.

  • Capacity Utilization Factor or “CUF” shall have the same meaning as provided in CERC (Terms and Conditions for Tariff determination from Renewable Energy Sources) Regulations, 2009 as amended from time to time; However, for avoidance of any doubt, it is clarified that the CUF shall be calculated on the Contracted Capacity; In any Contract Year, if ‘X’ MWh of energy has been metered out at the Delivery Point for ‘Y’ MW Project capacity, CUF= (X MWh/(Y MW*8766)) X100%; Declared CUF for this Project shall be % (to be revised as applicable).